Shop

You are here:
  1. Home
  2. Shop
  3. Page 117

Kollmorgen AKD-P00607-NBP N-0109

Product Name:​ AKD Series Servo Drive, 6 A, 480 VAC, EtherCAT, No Safetymodule
Product Introduction:​ Mid-power AKD drive for 240–480 VAC three-phase supply with EtherCAT real-time bus (NBP = EtherCAT option). N-0109 is internal firmware/label revision

Kollmorgen AKM42E-SSS2MA02

Product Name:​ AKM42E Synchronous Servo Motor, 480 VAC, Special Build
Product Introduction:​ Size 42 (84 mm frame) AKM motor with 480 VAC winding, smooth shaft, resolver or integral encoder, special sealing/config (S-code = co-engineered variant).

Kollmorgen CH061A-13-3105

Product Name:​ Cartridge DDR (Direct Drive Rotary) Frameless-Style Torque Motor
Product Introduction:​ Bearingless permanent-magnet torque motor in a cartridge housing. Rotor couples directly to machine shaft using machine’s own bearings. Factory-aligned EnDat feedback.

Kollmorgen VT006-050-0-RM

Product Name:​ VT-Series Dynamic Brake / Regen Resistor Module (VT006 frame)
Product Introduction:​ External braking resistor assembly for shunting regenerative energy from DC bus during deceleration. Prevents over-voltage faults on AKD/S700 drives.

Kollmorgen AKD-P00306-NBC12

Product Name:​ AKD Series Ethernet Servo Drive, 3 A, 120/240 VAC, CANopen
Product Introduction:​ Next-generation AKD drive with integrated motion indexer, TCP/IP service channel and CANopen interface. Auto-tunes AKM and other PM motors.

Kollmorgen SBD4-45-2101\0

Product Name:​ SBD4 Industrial Servo Power Supply Module
Product Introduction:​ Compact three-phase input DC-bus power supply for Kollmorgen servo drive racks (SBD4 family). Provides regulated DC bus and auxiliary logic voltage for connected axis drives.
Technical Specifications:
  • Input Voltage: 200–240 VAC or 380–480 VAC ±10% (model suffix defines single/three-phase)

Kollmorgen AKMH31C-CNKNGF

Product Name:​ AKMH31 Stainless Steel Hygienic Synchronous Servo Motor
Product Introduction:​ 316L stainless steel, IP69K-rated food-grade servo motor for aggressive washdown. Round housing with no external bolts, sloped rear cover, FDA-approved seals.
Technical Specifications:
  • Frame: AKMH3 (Ø89 mm flange)

Kollmorgen BDS5-1/032-OPT-1

Product Name:​ BDS5 Integrated Brushless Positioning Servo Drive
Product Introduction:​ Compact, single-enclosure brushless servo combining a programmable position indexer, servo amplifier and I/O interface. Uses a BASIC-like motion language and closes position, velocity and current loops in one 16-bit processor.

Kollmorgen S70602-NANA

  • Product Name:​ S700 Series Digital Servo Drive (6 A, 230 VAC class)
  • Product Introduction:​ High-dynamic universal servo amplifier supporting multiple feedback and fieldbuses.
  • Technical Specifications:
    • Model:​ S70602-NANA (NANA = no extra option cards, standard firmware)

Kollmorgen CR06251-000000

  • Product Name:​ Cable / Connector Assembly or Option Card (CR family)
  • Product Introduction:​ Kollmorgen wiring harness or interface component for motor/drive interconnection.
  • Technical Specifications:
    • Type:​ CR06251 power/feedback cable or control board

Kollmorgen SAM-DA-400-07N-P4N-F

    • Product Name:​ Linear Actuator / Servo Actuator Module (SAM series)
    • Product Introduction:​ Integrated servo actuator combining motor and mechanical drive section for linear or rotary actuation.
    • Technical Specifications:
      • Series:​ SAM-DA

Kollmorgen SE55200-000000

  • Product Name:​ Servo Drive / Motion Controller Module (SE family)
  • Product Introduction:​ Kollmorgen SE-series drive or option board used in integrated motion systems.
  • Technical Specifications:
    • Model Class:​ SE55200