Shop

You are here:
  1. Home
  2. Shop
  3. Page 657

Yokogawa WT333-R-C1 Precision Power Analyzer

Technical Specifications:

  • Voltage Range: 10mV-1000V, current range: 100μA-1200A (with appropriate current sensors).
  • Measurement Accuracy: Voltage and current: ±0.02% of reading; active power: ±0.03% of reading.
  • Frequency Range: DC, 0.1Hz-1MHz, covering a wide range of electrical signal frequencies.
  • Harmonic Measurement: Up to 50th harmonic, can analyze the harmonic content of the power signal in detail.
  • Data Storage: Built - in 1GB memory, which can store a large amount of measurement data; it also supports data storage through a USB flash drive.

Yokogawa GCRV-GBARS88N0 High-performance Control Valve Positioner

Technical Specifications:

  • Input Signal: 4-20mA DC current signal, input impedance 250Ω.
  • Output Signal: Pneumatic signal, output pressure range 0.02-0.1MPa (0.2-1.0kgf/cm²).
  • Positioning Accuracy: ±0.5% of full stroke, ensuring precise control of the valve opening.
  • Hysteresis: ≤0.3%, with good control repeatability.
  • Response Time: ≤1 second, which can quickly respond to changes in the control signal.
  • Working Voltage: 24V DC, power consumption is 12mA.
  • Working Temperature: -20℃ to 70℃, suitable for most industrial working environments.
  • Protection Rating: IP65, dustproof and waterproof.

Yokogawa YNT511D System Interface Module

Technical Specifications:

  • Communication Protocol: Supports Modbus/TCP, Modbus/RTU, OPC UA, and Ethernet/IP protocols, realizing protocol conversion between different systems.
  • Communication Interface: 2 Ethernet ports (10/100Mbps), 2 RS - 485 serial ports, which can meet the needs of different communication connections.
  • Data Transmission Rate: The Ethernet port can reach 100Mbps, and the RS - 485 port can reach 115.2kbps.
  • Working Voltage: 24V DC, power consumption is 150mA.
  • Working Temperature: -10℃ to 55℃, storage temperature: -20℃ to 60℃.
  • Installation Method: DIN rail installation, which is convenient for integration into the control cabinet.

Yokogawa AAI143-H50 channel Isolated Analog Input Module

Technical Specifications:

  • Number of Channels: 16 isolated channels, no mutual interference between channels.
  • Input Signal: Rated 4-20mA DC current signal, allowable input range 0-25mA DC.
  • Accuracy: ±0.01%, ensuring the accuracy of signal collection.
  • Resolution: 24 bits, which can capture subtle changes in analog signals.
  • Input Impedance: 250Ω when powered on, ≥500kΩ when powered off.
  • Data Update Cycle: 10ms, enabling rapid data refresh.
  • Isolation Voltage: 500V AC between channels and between channels and the backplane.
  • Working Temperature: -10℃ to 55℃.

Yokogawa ALE111-S01 Physical Layer Interface Module for Industrial Communication

Technical Specifications:

  • Interface Type: It is equipped with a KS cable interface adapter, which is suitable for 32 - channel digital signal transmission.
  • Signal Transmission Rate: Up to 10Mbps, meeting the data transmission requirements of general industrial control occasions.
  • Isolation Voltage: 1500V AC, effectively preventing signal interference between the system and field devices.
  • Working Voltage: 24V DC, with a voltage fluctuation tolerance of ±10%.
  • Working Temperature: -20℃ to 70℃, in line with the ISA S71.04 class G3 standard.
  • Power Consumption: 80mA, with low power consumption characteristics.

Yokogawa ACG10S-E2120-ZCT+AIP903

Technical Specifications:

  • ACG10S - E2120 - ZCT: Communication rate is 31.25kbps, which is in line with the FOUNDATION Fieldbus H1 standard; it can connect up to 32 fieldbus devices; the working voltage is 24V DC; the power consumption is 120mA; the isolation voltage between the bus and the power supply is 500V AC.
  • AIP903: 8 isolated analog input channels, supporting 4-20mA DC current signal input; accuracy is ±0.01%; resolution is 24 bits; sampling cycle is 10ms; input impedance is 250Ω; isolation voltage between channels is 500V AC.
  • Overall Working Temperature: -20℃ to 60℃, which can adapt to the harsh industrial environment.

Yokogawa UT55A-010-11-00 Advanced Digital Indicating Temperature Controller

echnical Specifications:

  • Input Type: Universal input supporting thermocouple (K/J/T/B/R/S/E/N), RTD (Pt100/JPt100/Cu100), 0-10V DC voltage, 0-20mA DC current, and 0-100mV DC millivolt signals.
  • Indication Accuracy: ±0.1% of full scale, ensuring precise measurement results.
  • Control Cycle: 50ms/100ms/200ms, adjustable to meet different control response requirements.
  • Control Output: Relay contact, voltage pulse, current output (4-20mA DC) are available.
  • Communication Interface: Standard Ethernet (Modbus/TCP), RS - 485 (Modbus/RTU, P2P), optional PROFIBUS - DP.
  • Working Voltage: 100-240V AC, 50/60Hz; power consumption is 10VA.
  • Working Temperature: -10℃ to 55℃, storage temperature: -20℃ to 60℃.

Yokogawa SDV144-S63 Digital Input Module

Technical Specifications:

  • Number of channels: 16 channels, which can collect 16 - way digital signals at the same time.
  • Input signal type: DC 24V switch signal, with a signal input range of 15-30V DC.
  • Response time: 1ms, which can quickly capture the change of the input signal.
  • Isolation voltage: 1500V AC, effectively preventing signal interference between channels and ensuring the stability of signal collection.
  • Connection method: It adopts a signal cable interface adapter without explosion - proof function, and complies with the ISA standard G3, with a working temperature of -20℃ to 70℃.
  • Power consumption: 50mA (5V DC), 150mA (24V DC), with low power consumption and energy - saving characteristics.

Yokogawa AAI143-H53 Analog Input Module

Technical Specifications:

  • Number of channels: 8 isolated channels, which can collect 8 - way analog signals at the same time.
  • Input signal: 4-20mA current signal, and can also be configured to receive 0-10V voltage signal.
  • Accuracy: ±0.01%, ensuring the accuracy of signal collection.
  • Resolution: 24 bits, which can capture subtle changes in analog signals.
  • Isolation voltage: 500V AC between channels, effectively preventing signal interference.
  • Sampling cycle: 10ms, enabling rapid response to signal changes.
  • Working temperature: -10℃ to 55℃, which can adapt to the general industrial environment.

Yokogawa AIP825-2 Analog Input Module

Technical Specifications:

  • Number of channels: 8 channels, which can collect 8 - way high - precision analog signals at the same time.
  • Input signal: It supports 4-20mA current signal and 0-10V voltage signal input.
  • Accuracy: ±0.005%, which is suitable for high - precision measurement occasions.
  • Resolution: 24 bits, which can capture extremely subtle changes in analog signals.
  • Sampling cycle: 5ms, enabling rapid response to signal changes.
  • Input impedance: 250Ω for current signal and ≥10MΩ for voltage signal.
  • Working temperature: -10℃ to 55℃, which can adapt to the general industrial environment.

Yokogawa SAI143-H33 Analog Input Module

Technical Specifications:

  • Number of channels: 16 isolated channels, which can collect 16 - way analog signals at the same time, and there is no mutual interference between channels.
  • Input signal: The rated input is 4-20mA current signal, and the allowable input range is 0-25mA.
  • Accuracy: ±16μA, ensuring the accuracy of signal collection.
  • Input impedance: When the power is on, the impedance is 250Ω plus the current value; when the power is off, the impedance is ≥500kΩ.
  • Voltage drop: About 0.45V, which has little impact on the signal source.
  • Data update frequency: 40ms, which can quickly update the collected data.

Yokogawa DX230-1-2-S4 Data Acquisition Station

Technical Specifications:

  • Number of input channels: It has 1 analog input channel, 2 digital input channels, and supports 4 - 20mA current signal input.
  • Sampling rate: 100Hz, which can quickly collect data and capture the real - time changes of the process.
  • Storage capacity: It has a built - in 8GB storage space, which can store a large amount of historical data.
  • Display screen: 5 - inch color LCD screen, with a resolution of 800×480, which can clearly display data and curves.
  • Communication interface: It is equipped with Ethernet, RS - 232, and RS - 485 interfaces, facilitating data transmission and communication with the upper - level system.
  • Working temperature: -10℃ to 55℃, which can adapt to the general industrial environment.