Shop

You are here:
  1. Home
  2. Shop
  3. Page 194

Kollmorgen AKD-P1207-NAC

Product Description:
The AKD-P1207-NAC is a three-phase 480 V class AKD drive. "P" = Position indexer, "1207" = 12 A continuous / 30 A peak @ 187–528 VAC (240/480 VAC nominal 3Ø), "N" = standard I/O, "A" = CANopen (DS301+ DSP-402profile), "C" = standard options (no extra cards).

Kollmorgen S61001-EI

Product Description:
The S61001-EI belongs to the older but still supported S600 (Gold Line drive) family. Compact single-axis servo amplifier accepting ±10 V velocity/torque command from a motion controller or PLC. "EI" typically denotes enhanced I/O / specific firmware variant.

Kollmorgen AKD-P00606-NCE

Product Description:
The AKD-P00606-NCE is a panel-mount AKD servo amplifier from Kollmorgen's AKD platform. "P" = Position indexer (built-in motion tasks), "00606" = 6 A continuous / 18 A peak @ 120/240 VAC (85–265 VAC input), "N" = Standard I/O, "C" = EtherCAT® communication, "E" = 24 VDC logic supply included in standard, last "N" = no extra options.

Kollmorgen S70301-NANANAS

Product Name:​ S700™ High-Performance Digital Servo Drive — 1-Axis, 3 Arms Continuous, 240/480 VAC Input
Product Description:
The S70301-NANANAS is a member of Kollmorgen's S700 (Silver Line) family — a fully digital, high-bandwidth servo amplifier supporting both synchronous and asynchronous motors. It offers advanced tuning, electronic camming, and safe torque off (STO).

Kollmorgen MSK050C-0600-N

Product Introduction:
The MSK050C-0600-N is part of Kollmorgen's MSK family of high-performance, high-inertia servomotors designed for direct drive and demanding dynamic applications. Frame 050 = 80 mm flange approx.; "C" = medium-long stack; "0600" = 600V max DC bus winding; "-N" at end = standard shaft/seal/no brake or resolver/EnDat feedback (depends on full option string — when paired with N-S1-UG1-NNNN it means keyed shaft, std seal, no brake).

Kollmorgen N-S1-UG1-NNNN

Product Name:​ Kollmorgen Option / Mechanical Configuration Code — Smooth Shaft with Keyway, Standard Seal, No Special Coating (Applied to MSK or AKM Family)
Description:
This alphanumeric code is NOT a standalone device but a configuration/option code typically found on MSK (or occasionally AKM) servo motor ordering strings:

Kollmorgen AKM74Q-ANHNAA0

Product Description:
Large-frame AKM servo motor for high-torque applications. Frame 7, longest stack (4), "Q" winding for high-power/high-speed combination. "ANHNAA0" = resolver or SFD feedback, no brake, standard shaft/seal.

Kollmorgen AKM32D-ANCNDB0

Product Description:
Legacy AKM series brushless servo motor, Frame 3 (72 mm flange), medium stack length (option "2"). Winding code D indicates a specific voltage/speed winding for 320–480 VDC bus. Feedback "NC" = resolver or SFD depending on generation; "DB0" indicates no brake, standard smooth/keyed shaft, standard seals.

Kollmorgen AKM2G-23D-ACD2

Product Introduction:
The AKM2G-23D-ACD2 is part of Kollmorgen's second-generation AKM2G high-performance brushless servo motor family. It delivers higher torque density, lower cogging, and improved thermal performance compared to legacy AKM motors. Frame 23 = 58 mm square flange.

Kollmorgen CR03261

Product Description:
The CR03261 is a Kollmorgen standard cable/accessory part number from the CR series of pre-assembled motor and drive interconnect cables. It is typically used to connect Kollmorgen AKM/MSK servo motors to AKD/S700 series drives for power, feedback, or brake circuits. Exact pinout depends on motor family (Intercontec circular connector standard).

Kollmorgen AKM74L-ACCNR-0

Product Name:​ AKM74 Synchronous Servo Motor, Flange 74 mm (≈NEMA 34), Long Stack (L), No Brake, Circular Connector, Resolver Feedback (CNR = resolver, smooth shaft), Standard Seal Code (0)
Typical Specifications (AKM74L — no brake):
  • Flange Size:​ 74 × 74 mm

Kollmorgen 503-26606-00

Product Name:​ Kollmorgen Accessory / Option Module or Cable — typically an AKD I/O Expansion Board, Feedback Option Card, or Mounting Bracket​ (part #503-26606-00)
Overview:
Prefix "503-" in Kollmorgen numbering usually denotes a spare or accessory — e.g.: