Digital guide
You are here:
Detailed content
-
Family Code: DC00 = AKM standard cable family
-
Length / Variant: 01202 indicates cable length 1.20 m (1200 mm) in many Kollmorgen DC00 decoders; 090 = connector/style variant (typically 90° angled M23 or specific shield termination)
-
Technical Specs:
-
Rated voltage: matches AKM bus up to 640 VDC / 480 VAC
-
Conductor: copper, halogen-free, oil-resistant PVC or PUR jacket (variant dependent)
-
Shielding: braided foil+wire shield for EMI immunity
-
Connector: M23, straight or 90°, keyed, IP65/IP67 when mated
-
Temperature range: -25 °C to +80 °C (fixed); reduced for flexing
-
-
Construction: Stranded fine-wire conductors, twisted pairs for feedback, molded strain relief boot
-
Function: Carries 3-phase PWM power from AKD/S600 drive to AKM stator and returns resolver/encoder signals
-
Application: AKM22/41/42/62 hookup to AKD-B00307 or S60600-SE
-
Installation Notes:
-
Separate power and feedback cables at least 100 mm from control wiring
-
Use shielded clamp on drive end
-
Do not exceed bend radius (typically 10× outer diameter)
-
-
Caution: Mismatched connector keying will damage pin alignment; verify 90° orientation before tightening
