Technical Specifications: Model Number: GE 369-HI-R-M-0-E-0 Manufacturer: General Electric (GE) Relay Type: Electromagnetic Relay Contact Capacity: High, suitable for controlling motor start, stop, and direction operations Mechanical Lifespan: Relatively long, maintaining normal operation after multiple suction and release cycles Electrical Lifespan: Long, suitable for continuous operation in industrial automation equipment
Technical Specifications: Type: Electromagnetic Relay Input Voltage Range: 12-48VDC Output Voltage: 5VDC Output Current: Max 10A Efficiency: Greater than 90% Size: 170mm x 105mm x 32mm Weight: Approximately 120g Operating Temperature: -20°C to +50°C Storage Temperature: -40°C to +70°C Environmental Humidity: 5% to 95% RH (non-condensing) Processor: 32-bit RISC Processor
Technical Specifications: Type: Electromagnetic Relay Input Voltage Range: 12-48VDC Output Voltage: 5VDC Output Current: Max 10A Efficiency: Greater than 90% Size: 170mm x 105mm x 32mm Weight: Approximately 120g Operating Temperature: -20°C to +50°C Storage Temperature: -40°C to +70°C Environmental Humidity: 5% to 95% RH (non-condensing) Processor: 32-bit RISC Processor
Technical Specifications (Partial Information) Brand: GE (General Electric) Model: 369B1860G0030 Type: PLC Module (Programmable Logic Controller Module) Voltage: Typically operates on 220V, but may vary depending on application and system requirements. Compatibility: May be compatible with GE's OC6000E or other PLC systems. Connectivity: Likely to have various input/output connections for interfacing with other devices and systems.
Technical Specifications (Estimated and General) Brand: GE (General Electric) Type: Module, Controller, or Card (Specific type may vary based on application) System Compatibility: DCS (Distributed Control System), PLC (Programmable Logic Controller) System Environment: Standard VV Operating System: DCS/PLC Output Frequency: Standard kHz Power Requirements: May vary depending on specific application (e.g., voltage, current)
Technical Specifications Brand: GE Model: 269PLUS-100P-HI Type: Control Module CPU Model: 350 (used as a controller, I/O system, and specialty module) User Memory: 32KB I/O Capacity: 4K I/O Rack Capacity: 8 racks Logic Execution Speed: 0.22msec/K Voltage Rating: 120 V AC (as per some sources, but may vary depending on application) Frequency: 47-63 Hz
Technical Specifications Fuse Rating: 5 x 20 mm, 250 V, 2.5 A Insulation Voltage: 300 V Overload Curve Trip Time Accuracy: ±1% of displayed value Programmable Outputs: Thermal capacity, percentage of full load, and phase current Transmission Test: 50 MHz/15 W Short Circuit and Ground Fault Trip (S/C Trip): Lvl 1 to 11 x CT PRI/OFF
Technical Specifications Model: GE 8851-LC-MT Interface Type: LC1 Transmission Rate: 10/100/1000Mbps Working Wavelength: 1310nm Transmit Power: -9.5dBm to 0dBm Receive Sensitivity: -20dBm Maximum Transmission Distance: 10km Operating Temperature: -40°C to 85°C Power Supply: 3.3V or 12V DC (depending on specific application)
Technical Specifications Part Number: 8810-HI-TX Brand: GE Input Channels: 8 single-ended 4-20mA input channels Certification: Approved for SIL 2 safety applications Field Circuit Compatibility: Non-energized field circuits, compatible with 2-wire, 3-wire, or 4-wire transmitters HART Capability: HART pass-through, acquisition, and status reporting Power Requirement: 24V DC bus field power (required by 8914-PS-AC)
Technical Specifications Part Number: 8810-HI-TX Brand: GE Input Channels: 8 single-ended 4-20mA input channels Certification: Approved for SIL 2 safety applications Field Circuit Compatibility: Non-energized field circuits, compatible with 2-wire, 3-wire, or 4-wire transmitters HART Capability: HART pass-through, acquisition, and status reporting Power Requirement: 24V DC bus field power (required by 8914-PS-AC)
Technical Specifications Model Number: 8750-CA-NS Manufacturer: General Electric (GE) Type: Likely a part of a larger Distributed Control System (DCS) or Programmable Logic Controller (PLC) system Power Monitoring: Possesses power monitoring capabilities, as suggested by some sources mentioning it as a controller backplane with power monitoring features Compatibility: Likely compatible with GE's PAC8000 or similar control systems Work Voltage: Standard VV (specific voltage ranges may vary)
Technical Specifications Processor: 32-bit RISC processor Memory: 256 KB I/O Modules: Digital I/O: 32 points Analog I/O: 16 points Communication Interfaces: RS-232, RS-485, Ethernet Protection Rating: IP65 Dimensions: 115 mm x 70 mm x 35 mm (4.5 inches x 2.8 inches x 1.4 inches) Series: Part of the GE 8500 series logic controllers
