Shop

You are here:
  1. Home
  2. Shop
  3. Page 245

Kollmorgen CB10550

Product Brief:​ Factory-molded shielded cable with motor-side circular connector (Intercontec M23 or Hirschmann-style) and drive-side flying leads or mating connectors for Kollmorgen SERVOSTAR CD/S300/S600/S700 drives. CB10550 typically denotes a ServoStar CD/S300/S600 compatible motor power cable (and/or feedback — verify from cable tag: POWER vs FEEDBACK)​ for mid-current AKM/Goldline B/M-series motors (≈ 6–12 A rating). Some CB10550 references indicate the SERVOSTAR CD10550 drive​ — if the received item is a drive (heat sink + terminals + connectors) treat as SERVOSTAR CD10550 (230 VAC, 5 A cont); if a flexible cable with connectors, use the cable specs below.

Kollmorgen AKD-P01207-NB

Product Series:​ Kollmorgen AKD™​ Family — 240/480 VAC 3-Phase Variant ("-xzzz07")
Product Brief:​ High-performance single-axis servo amplifier for PMSM, asynchronous AC, linear, and DC brush motors. "P01207" = P-version (187–528 VAC 3Φ input), 12 Arms continuous / 30 A peak. "N" = no extra option card fitted (fieldbus slot empty). "B" = No built-in fieldbus interface card — analog ±10 V, Step/Dir, Encoder Follower, and Modbus TCP via Ethernet port are standard. Final "—" (no trailing letters) = Standard I/O, no STO. Fully auto-recognizes AKM/AKM2G motors via M23 connector ID resistors.

Kollmorgen SEB-204-B-91-0

Product Brief:​ Fail-safe (spring-applied, electrically released) friction disk brake designed to mount integrally on the non-drive end of a Kollmorgen Goldline B-204/B-206 (frame 20) servo motor. Engages automatically when 24 VDC brake supply is removed (power-off = brake ON). Holds load during dwell, emergency stop, or power loss. "SEB-204" = brake sized for B-20x motor frame; "-B-91-0" = 24 VDC coil, specific friction lining/thickness code, no extra options.

Kollmorgen 7201-STEP

Product Brief:​ The 7201-STEP is an interface/indexer plug-in board or configured base unit for the DigiFAS 7000 amplifier chassis, providing step-and-direction input acceptance and local indexer (motion program) capability for stepper or brushless motor control. DigiFAS 7000 main power stage accepts 3× 80–480 VAC and drives stepper or BLDC motors; 7201-STEP handles command interpretation — accepts step pulses (up to several MHz) and direction signals, and can execute stored motion profiles (indexing, homing, cam tables) from onboard memory.

Kollmorgen S30361-NA-ARM9

Product Brief:​ Digitally controlled 3-phase PWM servo amplifier providing torque, velocity, and position control loops. S30361 = 230/400 VAC 3Φ input, 6 A continuous / 12 A peak. "NA" = No optional fieldbus card (bare analog/step-dir interface); "ARM9" reference on label indicates ARM9-based processor platform (S300 uses 32-bit RISC CPU). Interfaces via ±10 V analog command, step/direction, or master encoder follow. Supports resolver, incremental encoder, EnDat, BiSS via appropriate feedback card.

Kollmorgen AKD1207-NBCC-0

Product Brief:​ High-performance single-axis Ethernet-ready servo amplifier for PMSM, asynchronous AC, linear, and DC brush motors. "1207" = 7 Arms continuous / 14 A peak @ 480 V class (or 12 A peak @ 240 V — check firmware rev; typical 1207 = 7 A cont / 14 A pk). "N" = no extra option card (CANopen module in fieldbus slot). "B" = CANopen (CiA 301 / DS402 profile)​ pre-installed. "C" = Standard I/O. "C" again per some codings = Std I/O confirmed; "-0" = no additional accessories. No "S" = No Safe Torque Off (STO).

Kollmorgen CB10560

Product Series:​ Kollmorgen SERVOSTAR CD Family​ — 230 VAC Class
Product Brief:​ Compact digital brushless servo drive for 3-phase PMSM/BLDC motors. CD10560 variant provides 5 A continuous / 10 A peak​ output from 208–230 VAC 3Φ input. Features SERCOS interface option or analog ±10 V / step-dir control depending on interface card fitted. CB10560 in OEM lists typically references the CD10560 drive itself (catalog cross-reference: CB = Configured Build of CD platform).

Kollmorgen B-206-B-22-S-2

Product Brief:​ Same architecture as B-204-C-21 but with B-winding​ (lower torque constant / higher speed capability) and suffix "-S-2" indicating smooth shaft (no keyway) and special sealing / connector arrangement per Kollmorgen Goldline option coding. Frame 20 (≈ 89 mm flange). Intended for applications needing higher RPM at moderate torque. Compatible with SERVOSTAR S300/S600/S700 and AKD (120/240 V models for B-winding).

Kollmorgen N41HCLM-LNK-NS-01

Product Brief:​ 2-phase (or 4-phase bifilar) hybrid stepping motor with 1.8° full-step angle (200 steps/rev). NEMA 42 (4.325 in × 4.325 in) flange, heavy-duty construction with Class B insulation, premium "M" winding for maximized torque. Factory-fitted with MS circular connector and 8 flying leads (for unipolar/bipolar series/parallel configurations). Shaft with keyway and shaft seal. Compatible with Kollmorgen stepper drives (7200/PD-xxx series) and 3rd-party microstepping drives.

Kollmorgen CR10561

Product Brief:​ Factory-molded shielded cable with motor-side circular connector (Intercontec / M23 style) and drive-side flying leads or mating connector for Kollmorgen SERVOSTAR S300/S600/S700 or early AKD drives. CR-prefix cables are legacy configured assemblies — CR10561 typically denotes a specific length/pinout for Goldline B/M/H series motor power + resolver/encoder feedback (dual-cable style — power separate from feedback, or combo depending on exact sub-code). Some references list CR10561 as a resolver feedback cable​ for Goldline B-series motors.

Kollmorgen B-204-C-21

Product Brief:​ 3-phase interior permanent magnet (IPM/NdFeB) synchronous servo motor offering high torque density and low cogging for dynamic point-to-point motion. Frame "20" = 20-size (flange ≈ 89 mm / 3.5 in square — NEMA 34 mounting pattern). "C" = winding code (medium torque/speed for 230 V bus). Supplied with integral resolver or encoder (factory-fitted — verify from nameplate). Compatible with SERVOSTAR S300/S600/S700 and AKD drives.

Kollmorgen CB10661-MZ

Product Series:​ Kollmorgen SERVOSTAR CD​ (Compact Drive) Family — 230 VAC Class
Product Brief:​ Digitally controlled 3-phase PWM servo amplifier for brushless (BLDC/PMSM) and brushed DC servo motors. Designed for stand-alone or multi-axis machine control with SERCOS optical fiber interface for deterministic real-time communication with a motion controller. CB10661-MZ is a 230 VAC input, medium-current variant of the CD series.