Shop

You are here:
  1. Home
  2. Shop
  3. Page 199

Kollmorgen BOX-P01207-NAC

Product Name:​ AKD Peripheral Control Box
Introduction:​ Operator/IO expansion enclosure for AKD-P01207 drives, providing remote start/stop, IO, and service Ethernet.
Specifications:
  • Pairing:​ AKD-P01207 (6 A 480 V class)

Kollmorgen AKD-P00607-NBPUS

Product Name:​ AKD Series Ethernet Servo Drive (240 V class)
Introduction:​ Compact pulse-width modulated servo drive for distributed Ethernet control architectures.
Specifications:
  • Supply:​ 120/240 Vac 1/3-phase (85–265 V)
  • Continuous Output:​ 6 A RMS (≈2 kW)

Kollmorgen S70362-NANA

Product Name:​ S700 Digital Servo Amplifier
Introduction:​ High-performance single-axis servo drive with extended motion programming, STO safety, and multi-fieldbus support.
Specifications:
  • Series:​ S703 (mid-range S700)

Kollmorgen PMA42Q-11100-00

Product Name:​ PMA Series Permanent-Magnet AC Servo Motor
Introduction:​ Mid-power PMAC motor used in general automation before AKM standardization; still supported as spare part.
Specifications:
  • Frame:​ PMA42 (approx. 104 mm frame)
  • Rated Power:​ 1.1 kW

Kollmorgen AKM74P-ACCNR-01

Product Name:​ AKM7 Series Synchronous Servo Motor
Introduction:​ 188 mm flange high-torque servo motor from the AKM family, optimized for heavy machine axes, press feeds, and large robotic joints.

Kollmorgen MTC302A1-M2C1

Product Type:​ 3-phase permanent-magnet synchronous servo motor
Introduction:​ Part of the legacy MTC / MT30x family, designed for medium-power machine-axis motion. The MTC302 frame is a NEMA-100 style housing with a 3-stack length. It was commonly paired with Servostar S300/S700 or early AKD drives in retrofit and spare-parts contexts.

Kollmorgen LYM53K-ACCNR-1100

Product Name:​ LYM 53-Frame Brushless Servo Motor, K-Winding, Resolver, Key Shaft, No Brake
Product Overview:
Cylindrical industrial servo motor from the LYM stainless/high-performance range. 53 = frame diameter group (≈ 132 mm), K = mid-speed winding (400 V class), ACCNR = IEC flange + key shaft + no brake + resolver, 1100 = special stack/length code.

Kollmorgen DANAHER446M-P

Product Name:​ Danaher Motion 446 Frame Brushless Servo Motor, M-Stack, P-Winding
Product Overview:
Obsolete Danaher Motion cylindrical servo motor absorbed into Kollmorgen after the 2008 Danaher Motion acquisition. 446 = frame series code, M = stack length, P = high-voltage low-current winding for 400/480 VAC.

Kollmorgen AKM73M-ACCNR-00

Product Name:​ AKM7 Series 188 mm Flange Brushless Servo Motor, Stack 3, M-Winding, Resolver, No Brake
Product Overview:
Housed permanent-magnet synchronous servo motor, 188 × 188 mm IEC square flange, mid-long stack, medium-voltage "M" winding for 400/480 VAC lines, 16-bit resolver feedback, keyed shaft, no holding brake.

Kollmorgen S70602-NA12

Product Name:​ SERVOSTAR S700 Single-Axis Servo Drive, 6 A, NA12 Factory Configuration
Product Overview:
Electrically the same 6 A / 4.5 kVA power stage as S70602-NAAKD. "NA12" is a configuration variant: no optional expansion bus card (NA), standard 24 V logic and brake relay, "12" denoting a specific I/O and firmware default set used in certain OEM BOMs.

Kollmorgen P00606-NBC

Product Overview:
"P00606-NBC" is the ordering/config fragment for an AKD-P chassis, 6 A continuous, 2 kW class, with "N" = no base fieldbus card, "B" = standard brake/logic config, "C" = standard connectors. It is not a complete shippable model unless expanded to AKD-P00606-NBCN-0000 or similar full BOM.

Kollmorgen LE06565-AG

Product Name:​ LE Iron-Core Direct-Drive Linear Servo Motor (Forcer Segment)
Product Overview:
A 3-phase U-channel iron-core linear motor from the Kollmorgen LE series. It produces linear thrust directly from electrical current without ballscrew, rack or belt. "LE06565-AG" denotes a specific forcer length, stack and connector layout; the magnet track is ordered separately.