Shop

You are here:
  1. Home
  2. Shop
  3. Page 249

Kollmorgen VF-DC0474N-12-0

Product Introduction

Dedicated isolated DC auxiliary power supply developed by Kollmorgen for servo drive internal control circuit and external sensor power supply; model suffix 12 represents fixed 12VDC output voltage, N indicates industrial noise suppression enhanced version, 0 standard hardware configuration without extended overload protection function. Matches all S400/S600/S700 series servo drives as internal auxiliary power replacement spare part and external sensor power supply module.

Kollmorgen S60300-590

Product Introduction

Mid-high power three-phase servo drive of Kollmorgen S600 platform, hardware revision code 590 corresponds to factory preset firmware version with enhanced tension control algorithm, designed for heavy-load continuous operation equipment requiring stable constant torque output. Supports synchronous servo motors, linear motors and asynchronous spindle motors, rich bus communication expansion options for multi-axis heavy industrial automation production lines.

Kollmorgen 403M-C/S403M-CA

Product Introduction

Mid-power compact servo drive of Kollmorgen S400 platform, S403M-CA variant expands digital I/O channel quantity based on standard 403M-C hardware. Optimized for small automated machinery with limited cabinet space, compatible with low-to-medium inertia AKM series servo motors, built-in motion sequence storage for standalone operation without upper PLC controller.

Kollmorgen S71201-NA

Product Introduction

Full-digital high-performance single-axis servo amplifier developed by Kollmorgen for medium-power precision motion control. Optimized for synchronous servo motors, linear motors and asynchronous motors, integrated multi-bus communication and SIL3 safety torque off function, standardized DIN rail cabinet mounting design for automated production lines.

Kollmorgen 503-26606-21REP

Product Introduction

503-26606-21REP is an official factory replacement (REP suffix = Replacement) single-cable combined power + encoder wiring harness exclusively designed for AKM medium/large frame servo motors paired with AKD, MMC-SD and S700 series servo drives. Model number 26606 defines internal conductor layout, shielding structure and connector pin assignment; suffix 21 specifies fixed finished cable length of 21 meters.

Kollmorgen S71202-NA

Product Introduction

S71202 top-tier high-current single-axis servo drive under S700 platform; 12 = 12 Arms continuous output rating, NA suffix standard universal I/O, basic STO SIL2 safety function, dual EtherCAT/CANopen onboard communication interface. Designed for ultra-large frame high-torque servo motors and heavy load multi-ton gantry automation equipment, support parallel DC bus multi-drive shared regenerative energy system.

Kollmorgen

Product Introduction

AKD-P01207 high-current mid-high power servo drive under AKD-P platform; 012 = 12 Arms continuous output rating, NAC suffix defines standard CANopen bus, analog I/O, standard STO safety circuit; N-0073 is factory production calibration serial sub-code without hardware configuration difference. Matched with large frame AKM65/AKM72 series high-torque servo motors for heavy load automation axes.

Kollmorgen S70662-NAF2NA

Product Introduction

S70662 medium power single-axis servo drive under S700 platform; 06 = 6 Arms continuous output rating, suffix NAF2NA defines standard I/O, F2 extended safety function card pre-installed, universal feedback interface, standard EtherCAT/CANopen dual bus communication. Integrated extended SIL3 safety motion functions for machine tool safety critical axes. Duplicate suffix r is factory secondary calibration marking with no hardware difference.

Kollmorgen B-604S-A-51-B3

Product Introduction

B-604S medium frame low-inertia servo motor under Kollmorgen Goldline B platform, designed for medium-speed frequent start-stop reciprocating motion applications. Coding breakdown: B = Goldline B series, 604 = frame and stack length, S = low rotor inertia winding, A = standard single-ended shaft, 51 = 230 VAC winding voltage grade, B3 = resolver feedback + no holding brake configuration. Matched with MMC-SD and S706 series mid-power servo drives.

Kollmorgen AKD-T00307-ICA

Product Introduction

AKD-T00307 compact low-power servo drive for small precision automation axes, T represents thin cabinet slim body design; 003 = 3 Arms continuous output current; suffix ICA defines standard EtherCAT communication, universal analog/digital I/O, standard safety STO hardware circuit. Optimized for small desktop equipment with limited cabinet installation space, full compatibility with small frame AKM series servo motors.

Kollmorgen AKM72P-ANCNDA00

Product Introduction

AKM72 ultra-large frame super high torque servo motor, P suffix represents extra long stator stack maximum torque winding design. ANCNDA full option code defines multi-turn EnDat 2.2 absolute encoder, standard cylindrical shaft, Class F insulation, integrated 24 VDC electromagnetic holding brake, double seal shaft structure. Matched with high-current AKD-P or S712 series high-power servo drives for heavy load continuous motion control.

Kollmorgen AKM65K-ACC2R-0

Product Introduction

AKM65 frame size medium-large inertia high-torque synchronous servo motor, optimized for heavy load high acceleration continuous operation. Model coding breakdown: 65 = frame size, K = high stack length high torque winding, ACC2R = feedback, shaft, insulation, brake combination option, suffix 0 = no holding brake configuration. Fully compatible with Kollmorgen AKD / S700 series servo drives for plug-and-play automatic identification.