Shop

You are here:
  1. Home
  2. Shop
  3. Page 144

GE 125D5788G1PCB

Brand:​ General Electric
Product Name:​ 125D5788G1 Printed Circuit Board Assembly (Bare/Populated PCB)
Platform:​ GE Speedtronic / Drive auxiliary board (non-DS/IS prefixed internal PCB)
  • Product Brief:​ Bare or factory-populated control PCB issued under GE drawing 125D5788 G1; used as a sub-assembly inside larger DS3800/DS200 modules or excitation chassis.

GE DS200TCQAG1BHF

Brand:​ General Electric
Product Name:​ DS200 TCQA Thermocouple Input Board
Platform:​ GE Mark VI / Mark VIe (DS200 family)
  • Product Brief:​ High-density thermocouple and millivolt analog input board with cold-junction compensation and isolation for turbine exhaust and bearing temperature arrays.

GE DS3800DMPK

Brand:​ General Electric
Product Name:​ DS3800 DMPK Distributed Multi-Processor / Regulator Communication Kit
Platform:​ Mark IV Speedtronic DS3800 series (also referenced in Mark V distributed I/O contexts)
  • Product Brief:​ Microprocessor regulator and communication gateway board executing speed/load PID and bridging controller to Genius bus or Ethernet I/O.

GE DS3800HVDB1G1D

Brand:​ General Electric (GE Energy – Speedtronic)
Product Name:​ DS3800 HVDB High-Voltage DC Digital Input Board
Platform:​ GE Speedtronic Mark IV / Mark V DS3800 I/O family
  • Product Brief:​ 16-channel isolated high-voltage DC discrete input module for sensing breaker status, relay contacts and field 48–125 VDC signals directly without external droppers.

GE DS200DCFBG2B

  • Product Name:​ GE Mark V DS200DCFBG2B DC Feedback Board
  • Product Description:​ A vital power supply and signal conditioning board within the Mark V drive system. It converts incoming AC power into regulated DC voltages required by the control electronics and provides feedback signals regarding the drive's performance.

GE DS215UCIBG3AZZ01A

  • Product Name:​ GE Mark V DS215UCIBG3AZZ01A UCI Board (Unit Control Interface)
  • Product Description:​ The central processing unit for the GE Mark V Turbine Control System. It coordinates all control, protection, and communication functions for the turbine-generator set.

GE IS210AEDBH4A

  • Product Name:​ GE Bently Nevada IS210AEDBH4A Acoustic Emission (AE) Bridge Interface
  • Product Description:​ Part of the Bently Nevada Asset Condition Monitoring suite, this module interfaces with AE sensors to detect high-frequency stress waves generated by friction, impacts, or cavitation in machinery.

GE IS200ECTBG2A

  • Product Name:​ GE EX2100 IS200ECTBG2A Exciter Contactor Terminal Board
  • Product Description:​ This board manages the interface between the excitation control logic and the high-power contactors that control the generator field. It handles the switching of the exciter and main field circuits.

GE IS200EROCH1A

  • Product Name:​ GE EX2100 IS200EROCH1A Relay Output Card
  • Product Description:​ An option card utilized within the GE EX2100 Excitation Control System. It provides additional relay outputs for the excitation regulator, often used for auxiliary functions or backup protection schemes.

GE IS210AEDBH4AGD

  • Product Name:​ GE Mark VIe IS210AEDBH4AGD Digital Input Termination Board
  • Product Description:​ This terminal board serves as the primary interface for discrete field signals entering the Mark VIe system. It is specifically configured for Triple Modular Redundant (TMR) applications, ensuring high reliability for safety-critical systems like turbine controls.

GE IS200EROCH1ADD

  • Product Name:​ GE Mark VIe IS200EROCH1ADD Relay Output Module
  • Product Introduction:​ A critical component of the GE Mark VIe control system, this card provides isolated relay outputs to control field devices such as solenoids, alarms, and motor starters. It acts as the bridge between the digital logic of the controller and the physical plant equipment.

GE FVK364R

  • Product Name:​ GE FVK Series Bus Plug Fuse Clips / Retainers
  • Product Description:​ These are heavy-duty fuse clips designed specifically for integration into GE FVK series bus plugs. They serve as the critical interface holding the current-limiting fuses securely within the bus plug housing, ensuring reliable electrical contact and safety.