Shop

You are here:
  1. Home
  2. Shop
  3. Page 639

AEG AS-BDAP-21 High-Precision Single-Channel Analog Output Module

  • Product Introduction: This is a high-precision single-channel 12-bit analog output module of the AEG Modicon series, designed for converting the digital control signal output by the PLC CPU into a high-precision standard analog voltage/current signal to drive a single industrial field precision actuator such as electric regulating valves and precision frequency converters. It features high conversion accuracy, low signal drift and strong driving capacity, and is a core module for high-precision single-channel analog control in industrial process control systems that require precise regulation of a single process parameter.
  • Technical Specifications:
    • Output Channel: 1 independent high-precision analog output channel, dedicated to single signal output.
    • Output Signal Types: 4-20 mA DC current, 0-10 VDC voltage (software configurable, seamless switching).
    • Resolution: 12-bit; Output Accuracy: ±0.05% of full scale at 25°C, ±0.1% over the entire operating temperature range.
    • Signal Drift: ≤20 ppm/°C (temperature drift), ≤0.01% FS/year (time drift), ultra-low drift for long-term stable output.
    • Output Load Capacity: Current output ≤500 Ω, voltage output ≥1 kΩ, strong driving capacity for field actuators.

AEG BM85S232 Industrial RS-232 Serial Communication Module

  • Product Introduction: This is a dedicated industrial RS-232 serial communication module of the AEG BM85 series, designed for realizing RS-232 serial communication between AEG Modicon PLC systems and various RS-232 standard equipment such as programming terminals, HMIs, printers and barcode scanners. It features industrial-grade electrical isolation, strong anti-interference performance and stable communication, and converts the PLC backplane bus signal into standard RS-232 serial signal, serving as a core communication accessory for the connection between Modicon PLC systems and RS-232 peripheral equipment.
  • Technical Specifications:
    • Communication Standard: RS-232C (EIA/TIA-232), support full-duplex communication.
    • Communication Interface: DB9 female connector (standard RS-232 interface), with screw locking structure for firm connection.
    • Transmission Rate: 300 bps-115200 bps, software configurable, adaptive baud rate.
    • Transmission Distance: Up to 15 meters, in line with RS-232 standard transmission distance.
    • Data Format: 7/8 data bits, 1/2 stop bits, odd/even/no parity, all software configurable.

AEG PC-E984-255 Modicon 984 Series Industrial Ethernet Programming & Communication Station

  • Product Introduction: This is a high-performance industrial Ethernet programming and communication station dedicated to the AEG Modicon 984 series medium and large PLC systems, integrating industrial computer hardware, dedicated programming software, industrial Ethernet communication and multi-protocol conversion functions. It features a high-performance industrial processor, a large-size display and a rich communication interface, realizing high-speed program download/upload, online real-time debugging, remote monitoring and multi-protocol communication of the Modicon 984 series PLC system, and is a core engineering tool for the design, debugging and remote management of large-scale Modicon 984 series PLC control systems.
  • Technical Specifications:
    • Processor: Intel Core 2 Duo industrial-grade processor, operating frequency 2.0 GHz, with dedicated industrial control chipset.
    • Memory: 2 GB DDR2 industrial RAM (expandable to 4 GB), 160 GB industrial solid state drive (SSD) for software and program storage.
    • Display: 15-inch industrial color TFT LCD screen, resolution 1024×768 pixels, with anti-glare and backlight function, backlight life ≥60,000 hours.
    • Input Device: Industrial membrane keypad + industrial trackball mouse, dustproof, waterproof and anti-vibration, suitable for industrial field operation.

AEG ZAE105 Industrial Grade Power Supply Surge Protection Module

  • Product Introduction: This is a dedicated industrial grade power supply surge protection module of AEG, designed for protecting AEG Modicon PLC systems and other industrial control equipment from damage caused by power supply line surges and transients such as lightning strikes and grid fluctuations. It is installed at the power input end of the industrial control cabinet, with fast response speed and high surge absorption capacity, which can clamp the surge voltage on the power supply line to a safe range, and is an essential safety protection accessory for industrial control equipment in harsh power grid environments.
  • Technical Specifications:
    • Protection Circuit: Three-stage surge protection circuit (gas discharge tube, varistor, TVS diode), multi-level absorption of surge energy.
    • Protected Voltage: 24 VDC (for PLC system power supply), compatible with 115/230 VAC input power supply of industrial power supplies.
    • Surge Absorption Capacity: 20 kA (8/20 μs impulse current), 10 kA (10/350 μs lightning impulse current).
    • Response Time: ≤1 ns, ultra-fast response to clamp surge voltage in time.
    • Clamping Voltage: ≤36 VDC for 24 VDC side, effectively limiting the surge voltage to the safe working range of PLC equipment.
    • Insertion Loss: ≤0.1 dB at 50/60 Hz, no impact on the normal power supply of the equipment.
    • Power Supply: No additional power supply required, powered by the protected power supply line.

AEG AS-B838-032 Digital Input Module

  • Product Introduction: This is a 32-channel high-density 24 VDC digital input module of the AEG Modicon 800 series, engineered for collecting a large number of 24 VDC digital switching signals from industrial field devices such as limit switches, pushbuttons, proximity sensors and photoelectric sensors. It features a high-density channel design, which greatly saves the installation space of the PLC chassis, and converts field digital signals into logic signals recognizable by the PLC CPU, serving as a core module for large-scale digital signal acquisition in industrial automation control systems with a large number of input points.
  • Technical Specifications:
    • Input Channels: 32 independent 24 VDC digital input channels, divided into 4 common groups of 8 channels each.
    • Input Type: Sinking input (NPN type), support dry/wet contact input, compatible with most 24 VDC field switching devices.
    • Input Voltage: 18-30 VDC; Turn-on Threshold: 11-15 VDC; Turn-off Threshold: 0-5 VDC.
    • Input Current: 2 mA at 24 VDC; Response Time: ≤10 ms (on and off), support adjustable filter time (1-100 ms).

AEG AS-B885-002 Universal Signal Type

  • Product Introduction: This is an 8-channel 14-bit universal analog input module of the AEG Modicon 800 series, designed for collecting multi-channel standard and non-standard analog signals from industrial field sensors and transmitters. It supports a variety of universal voltage and current signal types, with moderate resolution and high cost performance, and converts analog signals into digital signals for transmission to the PLC CPU, serving as a cost-effective core module for multi-channel analog signal acquisition in medium-precision industrial process control systems.
  • Technical Specifications:
    • Input Channels: 8 independent analog input channels, divided into 2 common groups, support single-ended input.
    • Signal Types: Universal signal input, support 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC (hardware configurable by DIP switch per group).
    • Resolution: 14-bit; Conversion Accuracy: ±0.1% of full scale at 25°C, ±0.2% over the entire operating temperature range.
    • Conversion Time: ≤80 μs per channel, support batch sampling of channels in the same group.
    • Isolation: 2500 VAC electrical isolation between channels and backplane bus, 1500 VAC isolation between channels in the same group.

AEG S74D-VB0-F0V0 Series CANopen Dedicated Fieldbus Gateway Module

  • Product Introduction: This is a CANopen dedicated intelligent fieldbus gateway module of the AEG S74D series, optimized for the CANopen fieldbus system, realizing high-speed protocol conversion and data exchange between CANopen and Modbus RTU/TCP, Profibus-DP, Ethernet/IP and other mainstream industrial communication protocols. It is specially designed to expand the connection range of the CANopen system, connect non-CANopen standard industrial equipment to the CANopen bus, and realize the seamless integration of the CANopen bus system with other industrial control networks, serving as a core device for CANopen bus system networking and expansion.
  • Technical Specifications:
    • Main Bus Interface: CANopen V2.0A/V2.0B, support 10 kbps-1 Mbps adaptive baud rate, up to 127 nodes connected.
    • Expansion Interfaces: 2×Ethernet (10/100 Mbps RJ45, Modbus TCP/Ethernet/IP), 2×RS-485 (Modbus RTU), 1×Profibus-DP, all ports work independently.
    • Processor: 32-bit ARM Cortex-M industrial processor, operating frequency 180 MHz, with CANopen dedicated communication driver and protocol conversion algorithm.
    • Data Processing Capacity: Up to 1000 CANopen data objects (PDOs/SDOs) for simultaneous transmission, data update rate ≤3 ms.

AEG DBK021 Industrial Digital Signal Conditioner & Distributor Module

  • Product Introduction: This is a multi-channel industrial digital signal conditioner and distributor module of AEG, designed for conditioning, isolating and distributing digital switching signals in industrial control systems. It can receive a single digital input signal and distribute it to multiple output channels, while realizing electrical isolation between input and output signals and filtering out industrial field interference signals, ensuring the reliable transmission and distribution of digital signals in harsh industrial environments, and is an important accessory for digital signal distribution and anti-interference in industrial control systems.
  • Technical Specifications:
    • Input Channels: 1 digital input channel, support 24 VDC dry/wet contact input, NPN/PNP type configurable.
    • Output Channels: 8 digital output channels, 24 VDC signal output, NPN open collector output type.
    • Input Current: 5 mA at on state; Output Rated Current: 1 A per channel, 4 A per common group.
    • Isolation Performance: 2500 VAC electrical isolation between input and output, between output channels.

AEG PC-K084-785 Modicon 800 Series Handheld Programming Terminal

  • Product Introduction: This is a portable handheld programming terminal dedicated to the AEG Modicon 800 series small and medium-sized PLC systems, integrating program editing, online debugging, parameter modification and system status monitoring functions. It features a compact and portable design, a humanized operation interface and a built-in communication module, enabling on-site offline programming and online real-time debugging of the Modicon 800 series PLC without the need for a desktop computer, and is a professional on-site maintenance tool for the Modicon 800 series PLC system.
  • Technical Specifications:
    • Processor: 16-bit industrial low-power processor, dedicated to PLC program processing and communication control.
    • Display: 4-line monochrome LCD screen, 20 characters per line, with backlight for low-light environment operation.
    • Input Device: Industrial membrane keypad with 35 keys, including function keys, numeric keys and editing keys, dustproof and anti-wear.
    • Communication Interface: RS-232 (Modicon dedicated protocol), transmission rate up to 19200 bps, with dedicated PLC connection cable.
    • Memory: 512 KB Flash memory for storing PLC programs and configuration parameters, supporting up to 10 program files.

AEG AS-B885-100 Channel High-Precision Analog Input Module

  • Product Introduction: This is a 4-channel 16-bit high-precision analog input module belonging to the AEG Modicon 800 series, engineered for collecting high-accuracy analog signals from industrial field precision sensors such as pressure transmitters, temperature transducers and flow meters. It converts analog voltage/current signals into high-resolution digital signals via advanced A/D conversion chips, and transmits the data to the PLC CPU for precise process control and data analysis, serving as a core component for high-precision industrial process signal acquisition.
  • Technical Specifications:
    • Input Channels: 4 independent isolated analog input channels, support single-ended and differential input switching.
    • Signal Types: 4-20 mA DC, 0-20 mA DC, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC (software configurable per channel).
    • Resolution: 16-bit; Conversion Accuracy: ±0.05% of full scale at 25°C, ±0.1% over the entire operating temperature range.
    • Conversion Time: ≤50 μs per channel, support synchronous sampling of all channels.
    • Isolation: 3000 VAC electrical isolation between channels, between channels and backplane bus, and between channels and power supply.

AEG MBP-30 Series Industrial PLC Battery Backup Module

  • Product Introduction: This is a dedicated battery backup module for AEG Modicon series PLC systems, designed to provide uninterrupted power supply for the PLC CPU module's RAM memory and real-time clock when the main power supply is cut off. It uses a high-capacity lithium battery with long service life, ensuring that the PLC control program, process data and real-time clock in the RAM memory are not lost during power failure, and is an essential accessory for the PLC system to ensure data retention and continuous operation after power recovery.
  • Technical Specifications:
    • Battery Type: High-capacity lithium manganese dioxide battery, non-rechargeable, maintenance-free.
    • Nominal Voltage: 3.6 VDC; Rated Capacity: 2400 mAh, high capacity for long-term power supply.
    • Backup Time: ≥2000 hours for PLC RAM memory and real-time clock power supply at 25°C, meeting the long-term power failure backup requirements.
    • Operating Temperature: -25°C to +70°C; Storage Temperature: -40°C to +85°C, wide temperature range for various industrial environments.
    • Connection Interface: AEG Modicon dedicated plug-in connector, directly connected to the PLC CPU module's battery socket, plug-and-play.

AEG CGD21-TB Series Industrial Digital I/O Terminal Block Module

  • Product Introduction: This is a high-density industrial digital I/O terminal block module of AEG CGD21 series, designed for centralized wiring and signal distribution of digital I/O signals in industrial control systems. It integrates the terminal block and signal conditioning function, realizes the reliable connection between the field digital switching signal and the PLC I/O module, and has the functions of signal filtering and anti-interference, which is an important accessory for improving the wiring standardization and signal stability of the industrial control cabinet.
  • Technical Specifications:
    • I/O Channels: 16 digital input channels + 16 digital output channels, 32 channels in total, high-density configuration.
    • Input Signal Voltage: 24 VDC, dry/wet contact input compatible, input current 5 mA at on state.
    • Output Signal Voltage: 24 VDC, PNP sourcing output, rated output current 2 A per channel, 8 A per common group.
    • Signal Filtering: Built-in RC low-pass filter, filtering frequency 1 kHz, effective suppression of high-frequency interference.