Product Introduction: The DH062 is a framed (housed) direct-drive rotary motor that couples directly to the load — eliminating gearboxes, belts, and couplings. The "M" denotes single-bearing housed version; "-22" typically indicates 220 V winding or specific stack/feedback config; "-1" = standard option set. Provides zero backlash, high stiffness, and exceptional repeatability
Product Introduction: This is a Kollmorgen-specified external braking resistor used to dissipate regenerative energy from decelerating servo motors when the DC bus voltage would otherwise rise to a fault level. The MTB prefix designates Motion Technology Brake resistor; "706" relates to AKD 6/12 A frame compatibility; "SB2" = Standard Brake Resistor, 2nd variant; H191-022 = resistance/power/cable configuration per Kollmorgen ordering system.
Product Introduction: The AKM33C is a medium-frame (Size 33 = 70 mm square flange) permanent-magnet synchronous servomotor from Kollmorgen's AKM family. "ANCNR-00" decodes approximately as: A=AKM series, N=Standard winding (640 VDC bus max for C-winding), C=Connector (Intercontec), N=No brake, R=Resolver feedback (typical for -NR suffix), 00=Standard seal/shaft.
Product Introduction: The AKD-B series is a standard-performance single-axis servo drive from Kollmorgen's AKD platform. It provides plug-and-play commissioning with Kollmorgen AKM servomotors and features Ethernet-based setup via Kollmorgen WorkBench software. The "B" denotes the base drive version without fieldbus; "N" = no options; "BE" typically indicates built-in EtherCAT option in some regional catalogs, but this unit is primarily analog/serial command capable.
Product Brief: Compact high-torque-density PMSM servo motor, frame 22 (70 × 70 mm IEC flange — NEMA 34 mini), E-winding = medium stack for AKM22 (continuous stall torque ~1.27 Nm). Factory-fitted with EnDat 2.1/2.2 absolute multiturn encoder ("EN" = EnDat in AKM2x code — "ENB2" = EnDat, B = keyed shaft, 2 = IP65 seals, DB0 = brake + connector config), keyed shaft, 24 VDC spring-applied holding brake ("DB" or "B" in brake position), rotatable M23 connectors (separate power+brake and feedback). Auto-recognizable by AKD/S700 drives via motor ID resistor network.
Product Brief: A DIN-rail mounted motor protection/monitoring module designed to work with Kollmorgen servo motors equipped with PTC or KTY thermal sensors, or as a standalone overload monitor for induction motors with thermal sensors. "SD" = Solid State / Monitoring type; "0.5" = settable current or sensor trip range reference (0.5 A base or PTC trip threshold reference); "230" = 230 VAC control supply; "D" = DIN rail housing with screw terminals. Provides relay contact output for machine shutdown on overtemperature or parameter violation. In many Kollmorgen legacy systems this was used alongside BDS4/SERVOSTAR to monitor PTC strings.
Product Brief: Digitally controlled 3-phase PWM servo amplifier for brushless PMSM, asynchronous AC, DC brush motors. S70102 = 120/230 VAC input, 1.5 Arms continuous / 4.5 Arms peak (S70102 = smallest S700 frame). "NANANAA" = N(Std I/O), A(No bus card — analog ±10 V, Step/Dir, Encoder Follow, Modbus TCP via Ethernet port), N(Multi-feedback card — resolver/encoder/EnDat/BiSS/Hiperface), A(Std I/O confirm), A(No STO/Std). Features onboard web server for commissioning, autotuning, and electronic gearing/camming (with option). Compatible with AKM1x–AKM3x small-to-mid motors.
Product Brief: The M205-C21-259 is a legacy configured part number for a Kollmorgen M200 Series direct-drive rotary table or frameless motor kit with a 205 mm outer diameter stator/rotor set, C21 = winding/stack option, 259 = special modification/feedback/bearing option. These are torque-motor-based rotary positioners providing zero-backlash direct coupling to the load. Modern equivalents are the Kollmorgen RBE / RMB / DD (Direct Drive Rotary) series.
