Product Category: 2-Channel Analog Input Monitor / Transmitter Product Overview: The AMM22T is a 2-channel analog input monitor manufactured by Yokogawa. It accepts 4–20 mA DC input signals and provides isolated monitoring, display, and optional retransmission. It is used for signal verification and alarm indication in process control panels.
Product Category: 8-Channel HART Analog Input Module Product Overview: The NFAI-H50 is an 8-channel analog input module with HART communication capability for Yokogawa DCS systems (CENTUM VP, CENTUM CS). The configuration A4S00 specifies the terminal and firmware variant. It accepts 4–20 mA DC or 1–5 V DC inputs and communicates via HART 7 protocol over the same 4–20 mA wiring.
Product Overview: The CX2420 is Yokogawa's 6-channel chart recorder with color LCD display. The configuration code decodes as: 3 = 6 recording channels, 2 = Input type (universal), 2 = Output type, S3 = Series revision, CST1 = Chart speed setting, BT1 = Backup battery, M1 = Modbus option, PG2 = Paper guide, S50 = 100mm paper width. It records process data on 100mm wide chart paper using thermal printing.
Product Category: Electromagnetic Flowmeter (Magmeter) Product Overview: The AE220MN is Yokogawa's high-accuracy electromagnetic flowmeter for measuring conductive liquids. The model code decodes as: AE220MN = Series designation, AB1 = PFA (perfluoroalkoxy) liner, LSA = Compact/integral type, A1DH = Electrode material code, BR = Output code, FF1 = Communication code, FN1 = Additional option code. It operates on Faraday's Law of Electromagnetic Induction.
Product Category: Vortex Shedding Flowmeter Product Overview: The AXG1A-G000121J011 is a vortex flowmeter from Yokogawa's AXG product family. The model code decodes as: AXG1A = Vortex transmitter series, G = SUS316L wetted material, 000121 = Pipe size/range code, J011 = Output/communication configuration. It measures flow of liquids, gases, and steam using the von Kármán vortex street principle.
Product Category: Field-Mounted Flow Rate Converter / Totalizer Product Overview: The FC311-S1 is a compact flow rate converter designed for field mounting. The configuration AS-S9391AT-02 specifies: S1 = Single-channel input, AS = Analog/Pulse input type, S9391AT = Specific I/O card assignment, 02 = Revision code. It processes flow sensor signals and outputs standardized 4–20 mA and pulse signals.
Product Category: Universal Analog Signal Converter Product Overview: The SC4A-S-PR-NN-0 10-10-T1 is a universal signal converter from Yokogawa's SC4A product line. It converts various analog process signals into isolated standardized outputs. The configuration code indicates: S = Standard type, PR = Process recording support, NN = No network communication, 0 = Base configuration, 10-10 = Specific range setting, T1 = Terminal block type.
Product Overview: The ACG10S-E2111 is a bidirectional analog signal converter manufactured by Yokogawa Electric Corporation. It converts and isolates 4–20 mA DC signals in industrial process control environments. The unit provides galvanic isolation between input and output circuits to eliminate ground loop interference and noise.
Product Introduction: The SPW482-53 is a multifunction power meter and energy quality analyzer from Yokogawa, designed for accurate measurement of electrical power parameters in industrial and commercial power systems. It measures voltage, current, active power, reactive power, apparent power, power factor, frequency, harmonics (up to 50th order), and energy (kWh/kvarh). The unit supports 3-phase 4-wire measurement and provides RS-485 and Ethernet communication for integration with SCADA, DCS, and energy management systems.
Product Introduction: The DR1A-100G-1D4A 4G2-030-0202/CE is a 100 mm full-scale hybrid recorder from Yokogawa's DR series. It combines a traditional analog chart drive with a digital LCD display for simultaneous paper-based trend recording and digital readout. The unit accepts 1 analog input channel and provides 4 alarm relay outputs. The 4G2 option indicates a 4-alarm, 2-display configuration. The suffix 030-0202/CE specifies the communication and configuration variant with CE marking for European compliance.
Product Introduction: The SDV531-S24V5.5A is a direct-acting solenoid valve from Yokogawa's SDV series, designed for on/off control of fluid media (air, water, oil, inert gas) in industrial automation and process control systems. The valve is normally closed (NC) and is energized by a 24 V DC coil drawing 5.5 A of current. It provides fast response for pneumatic and hydraulic control circuits.
Product Introduction: The AAXF010C-D1CE-GUN1-01A is a signal isolator and converter from Yokogawa's AAXF series, designed to isolate, convert, and condition analog signals in industrial automation and process control applications. It provides galvanic isolation between input and output circuits, protecting sensitive DCS/PLC inputs from field-side electrical noise, ground loops, and high-voltage transients. The unit supports multiple input and output signal types with DIN rail mounting.
