Digital guide
You are here:
Atlas Copco PF4002-G-EIP-HW
Product Series: PF4002 Series — Premium Generator-Equipped Compressor (Generation 2) with EIP Control
Product Introduction: The PF4002-G-EIP-HW is the flagship model in the PF range, delivering 40 m³/min of compressed air with a 275 kVA integrated generator and the Elektronikon Intelligent Panel (EIP) for full digital control and monitoring. The “EIP” designation represents the most advanced control system in the PF portfolio, enabling remote diagnostics, data logging, and auto-start/stop sequences. The “HW” rating supports high-altitude operation.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 40.0 m³/min (1,412 cfm) |
| Working Pressure Range | 7 – 13 bar (101 – 188 psi) |
| Rated Pressure | 13 bar (188 psi) |
| Engine Model | Cummins QSK19-C |
| Engine Power | 370 kW (496 hp) at 1,800 rpm |
| Generator Model | Stamford HCI / Leroy-Somer |
| Generator Power Output | 275 kVA / 220 kW (50 Hz) |
| Generator Voltage | 400V / 230V, 3-phase, 50 Hz |
| Control System | Elektronikon Intelligent Panel (EIP) |
| Compressor Element | Atlas Copco ZR 400 VSD+ airend |
| Cooling System | Water-cooled aftercooler + air-cooled engine |
| Fuel Tank Capacity | 800 L (211 US gal) |
| Operating Weight | 13,000 kg (28,660 lbs) |
| Dimensions (L×W×H) | Approx. 6,000 × 2,300 × 2,600 mm |
| Noise Level (at 7m) | ≤ 97 dB(A) |
| Emissions Compliance | EPA Tier 4 Final / EU Stage V |
Material Composition:
- Chassis: High-tensile S460 steel, hot-dip galvanized + powder coat
- Canopy: Double-wall steel with mineral wool insulation (50mm)
- EIP Panel Housing: IP65-rated polycarbonate enclosure
- Airend: ZR series with VSD+ variable speed drive capability
- Radiator: Aluminum brazed-plate heat exchanger
Structural Features:
- Heavy-duty tandem-axle option available
- Hydraulic leveling jacks (4 points)
- EIP touchscreen mounted on swivel arm at operator height
- External fuel fill with lockable cap
- Integrated exhaust after-treatment (DOC + DPF + SCR)
Working Principle: The Cummins QSK19 engine drives the VSD+ equipped ZR airend. The Elektronikon Intelligent Panel continuously monitors discharge pressure, temperature, oil pressure, and engine parameters. It automatically adjusts airend speed to match air demand, optimizing fuel consumption by up to 35% compared to fixed-speed operation. The integrated generator runs in parallel, supplying 275 kVA of electrical power.
Key Advantages:
- EIP provides full remote monitoring via telematics (COPAS Link compatible)
- VSD+ technology reduces fuel consumption by up to 35% at partial load
- Highest combined air + power output in PF series
- Advanced after-treatment ensures compliance in emission-restricted zones
Applicable Industries: Large mining operations, tunnel boring, major infrastructure projects, oil & gas field operations, shipyard applications
Installation Requirements:
- Level surface with ≥ 18 tonnes/m² bearing capacity
- 4m clearance required for canopy ventilation
- 400V 3-phase connection for EIP panel and optional remote monitoring
- GPS antenna mounting point on canopy roof (for telematics)
Usage Precautions:
- EIP firmware updates must be performed by authorized Atlas Copco technician
- DPF regeneration occurs automatically — do not interrupt engine during active regeneration
- Oil type: Atlas Copco Roto-Inject Fluid (synthetic, ISO VG 46)
- Service interval: 500 hours (engine), 4,000 hours (airend overhaul)
