Digital guide
You are here:
Atlas Copco PF3009-C-HW
Product Series: PF3009 Series — Enhanced Generation 9 Platform
Product Introduction: The PF3009-C-HW represents the Generation 9 evolution of the 30 m³/min platform, featuring upgraded engine performance, improved cooling capacity, and enhanced durability over the Generation 7. The “C” configuration is compressor-only. The “HW” designation ensures high-altitude rated performance.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 30.0 m³/min (1,059 cfm) |
| Working Pressure Range | 7 – 13 bar (101 – 188 psi) |
| Rated Pressure | 13 bar (188 psi) |
| Engine Model | Deutz TCD 2013 L04 4V |
| Engine Power | 260 kW (349 hp) at 1,800 rpm |
| Generator | None (C Configuration) |
| Compressor Element | Atlas Copco GA 30 VSD+ airend |
| Cooling System | Air-cooled with enhanced radiator package |
| Fuel Tank Capacity | 650 L (172 US gal) |
| Operating Weight | 10,000 kg (22,046 lbs) |
| Dimensions (L×W×H) | Approx. 5,300 × 2,150 × 2,450 mm |
| Noise Level (at 7m) | ≤ 95 dB(A) |
| Emissions Compliance | EPA Tier 4 Final / EU Stage V |
Material Composition:
- Chassis: S355 structural steel with enhanced cross-bracing
- Engine Block: Cast iron, wet-liner design
- Airend: GA 30 series with 4-valve rotor set
- Radiator: Enlarged aluminum core (30% more capacity vs Gen 7)
Structural Features:
- Upgraded hydraulic jack system with auto-level sensors
- Reinforced towbar with 2-point hitch
- Larger service access panels
- Improved canopy drainage system
Working Principle: Deutz TCD 2013 L04 4V engine drives the GA 30 VSD+ airend. The variable speed drive adjusts rotor RPM to match air demand, maintaining constant discharge pressure while minimizing fuel burn. Oil-injected compression provides sealing, cooling, and lubrication in a single system.
Key Advantages:
- Generation 9 platform with 13% more engine power than Gen 7
- VSD+ equipped for fuel savings at variable loads
- Enhanced cooling system supports continuous operation in 45°C ambient
- HW-rated for altitudes up to 4,000m
Applicable Industries: Construction, quarrying, rental fleets, concrete production, surface preparation
Installation Requirements:
- Ground bearing capacity ≥ 11 tonnes/m²
- 2.5m service clearance on compressor side
- Optional auto-start module available for unattended operation
Usage Precautions:
- VSD+ system requires clean power supply — use only with EIP or quality 400V connection
- Check V-belt tension weekly during first 100 hours
- Fuel filter change: every 250 hours
- Do not idle engine for more than 10 minutes without air load
