Digital guide
You are here:
Atlas Copco PF3007-C-HW
Product Series: PF3007 Series — Standard Portable Compressor (Generation 7)
Product Introduction: The PF3007-C-HW is a mid-range portable diesel screw compressor designed for general construction, drilling, and rental applications. The “07” indicates Generation 7 platform architecture. The “C” configuration denotes compressor-only (no integrated generator). The “HW” rating ensures reliable operation at altitudes up to 4,000 meters.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 30.0 m³/min (1,059 cfm) |
| Working Pressure Range | 7 – 13 bar (101 – 188 psi) |
| Rated Pressure | 13 bar (188 psi) |
| Engine Model | Deutz TCD 2013 L04 2V |
| Engine Power | 247 kW (331 hp) at 1,800 rpm |
| Generator | None (C Configuration) |
| Compressor Element | Atlas Copco GA/GR rotary screw airend |
| Cooling System | Air-cooled |
| Fuel Tank Capacity | 600 L (159 US gal) |
| Operating Weight | 9,800 kg (21,605 lbs) |
| Dimensions (L×W×H) | Approx. 5,200 × 2,100 × 2,400 mm |
| Noise Level (at 7m) | ≤ 94 dB(A) |
| Emissions Compliance | EPA Tier 4 Final / EU Stage V |
Material Composition:
- Chassis: S355 structural steel, powder-coated
- Canopy: Galvanized steel with acoustic insulation
- Airend Rotors: 5:6 asymmetric rotor profile, case-hardened steel
- Cooling Fins: Extruded aluminum on cylinder heads
Structural Features:
- Single-axle trailer chassis with hydraulic stabilizer legs
- Integrated forklift pockets (4 points)
- Lockable service doors on both sides
- Towbar with 50mm pintle hitch
Working Principle: Deutz diesel engine drives the screw airend through a flexible rubber coupling. Air is filtered, compressed in the airend, cooled by air-cooled aftercooler, and separated in the built-in moisture separator. Oil-injected compression ensures sealing and cooling of the rotor set.
Key Advantages:
- Proven Generation 7 platform with high parts commonality
- Compact footprint for site maneuverability
- Lowest weight in the 30 m³/min class at 9,800 kg
- HW-rated for high-altitude deployment
Applicable Industries: Road construction, water well drilling, general rental, paint spraying, pneumatic tool operations
Installation Requirements:
- Level surface with ≥ 10 tonnes/m² bearing capacity
- 2m minimum clearance for service access
- Optional electric start panel available
Usage Precautions:
- Check engine oil level before every startup
- Replace air/oil separator element at 2,000-hour intervals
- Do not exceed 13 bar working pressure
- Drain moisture separator daily during humid conditions
