Shop

You are here:
  1. Home
  2. Shop
  3. Page 618

Yokogawa ISC40FF-SA Inductive Conductivity Sensor

Technical Specifications:

  • Measurement Range: 0-2000mS/cm, which can meet the measurement needs of high - conductivity solutions.
  • Measurement Accuracy: ≤0.5% of reading ±1.0μS/cm, ensuring the accuracy of measurement results.
  • Process Temperature Range: PEEK material: -20℃ to 130℃; PFA material: -20℃ to 100℃.
  • Process Pressure Range: PEEK material: up to 20bar (depending on the installation method); PFA material: up to 10bar.
  • Built - in Temperature Sensor: Pt1000, which can realize automatic temperature compensation of conductivity measurement.

Yokogawa UT150L-RN FM-Certified Limit Temperature Controller

Technical Specifications:

  • Input Type: Universal input, supporting thermocouple (K/J/T/B/R/S/E/N), RTD (Pt100/JPt100/Cu100), and DC mV/V signals.
  • Indication Accuracy: ±0.1% of full scale, ensuring the accuracy of temperature measurement.
  • Control Type: Upper - limit or lower - limit control, with a latching function after the limit is triggered.
  • Control Output: Relay contact, voltage pulse, or 4-20mA current output, which can be selected according to the control object.Optional Functions: Dual alarm output, measurement value (PV) forwarding output, and RS - 485 communication (supporting Modbus protocol).

Yokogawa PH402G-E-1-E/Q/PM/U

Technical Specifications:

  • Measurement Range: pH: -2 to 15pH; ORP: -1500mV to +1500mV; temperature: -10℃ to 130℃.
  • Measurement Accuracy: pH: ±0.01pH; ORP: ±1mV; temperature: ±0.3℃.
  • Automatic Temperature Compensation: Supported, the compensation range is -10℃ to 130℃, using Pt1000 or NTC30k temperature sensors.
  • Output Signal: 4-20mA DC isolated current output (load up to 600Ω), 0-1V DC isolated voltage output (minimum load 1000Ω).
  • Relay Output: 4 relay contacts, which can be used for alarm, control, cleaning, and fault indication.
  • Power Supply: 176-264V AC, 50/60Hz, power consumption is 15VA.
  • Protection Rating: IP65, dustproof and waterproof, suitable for outdoor installation.

Yokogawa UD1B-015N High-Performance Servo Drive

Technical Specifications:

  • Rated Output Power: 1.5kW, matching the 1.5kW servo motor for use.
  • Input Voltage: Three - phase AC 200-240V, 50/60Hz, voltage fluctuation range ±10%.
  • Output Voltage: Three - phase AC, 0-230V, output current 7.5A (continuous), 11.2A (peak).
  • Control Mode: Position control, speed control, torque control, and can be switched flexibly.
  • Positioning Accuracy: ±1 pulse (with 17 - bit encoder motor).
  • Speed Response Frequency: 50kHz, ensuring rapid response to speed changes.
  • Communication Interface: RS - 485 (Modbus/RTU), supporting data interaction with the upper - level controller.
  • Working Temperature: 0℃ to 40℃, storage temperature: -20℃ to 60℃.

Yokogawa Z021C-7 Safety Barrier Module

Technical Specifications:

  • Input Signal: 4-20mA DC current signal, input impedance 250Ω.
  • Output Signal: 4-20mA DC current signal, with the same signal as the input.
  • Intrinsically Safe Parameters: Uo = 15V, Io = 22mA, Po = 0.1W, which meets the requirements of the intrinsic safety standard.
  • Isolation Voltage: 1500V AC, isolating the safe area from the hazardous area.
  • Working Voltage: 24V DC, power consumption is 10mA.
  • Working Temperature: -20℃ to 60℃, suitable for the working environment of the hazardous area.
  • Protection Rating: IP20, meeting the basic protection requirements.

Yokogawa UD1A-050N-1KD-2SA-2 High-precision Digital Display Unit

Technical Specifications:

  • Input Signal: It supports digital communication signals such as Modbus/TCP and Modbus/RTU, and can also receive 4-20mA analog signals.
  • Display Accuracy: ±0.01% of full scale, ensuring the accuracy of the displayed data.
  • Display Screen: 4.3 - inch color LCD screen, resolution 800×480, with a bright display effect.
  • Display Mode: It supports digital display, bar graph display, and trend curve display, and can switch between different display modes according to needs.
  • Communication Interface: Ethernet, RS - 485, supporting data interaction with the upper - level control system.

Yokogawa ALR121-S50 Redundant Power Supply Module

Technical Specifications:

  • Output Voltage: 24V DC, output voltage stability is ±1%.
  • Output Current: Each channel has an output current of 5A, and the total output current of the two redundant channels is 10A.
  • Input Voltage: 100-240V AC, 50/60Hz, with a wide voltage input range.
  • Efficiency: ≥85%, with high energy - saving performance.
  • Working Temperature: 0℃ to 40℃, storage temperature: -20℃ to 60℃.
  • Protection Function: Over - voltage, over - current, short - circuit, and over - temperature protection, which can effectively protect the module and the load equipment.

Yokogawa WT333-R-C1 Precision Power Analyzer

Technical Specifications:

  • Voltage Range: 10mV-1000V, current range: 100μA-1200A (with appropriate current sensors).
  • Measurement Accuracy: Voltage and current: ±0.02% of reading; active power: ±0.03% of reading.
  • Frequency Range: DC, 0.1Hz-1MHz, covering a wide range of electrical signal frequencies.
  • Harmonic Measurement: Up to 50th harmonic, can analyze the harmonic content of the power signal in detail.
  • Data Storage: Built - in 1GB memory, which can store a large amount of measurement data; it also supports data storage through a USB flash drive.

Yokogawa GCRV-GBARS88N0 High-performance Control Valve Positioner

Technical Specifications:

  • Input Signal: 4-20mA DC current signal, input impedance 250Ω.
  • Output Signal: Pneumatic signal, output pressure range 0.02-0.1MPa (0.2-1.0kgf/cm²).
  • Positioning Accuracy: ±0.5% of full stroke, ensuring precise control of the valve opening.
  • Hysteresis: ≤0.3%, with good control repeatability.
  • Response Time: ≤1 second, which can quickly respond to changes in the control signal.
  • Working Voltage: 24V DC, power consumption is 12mA.
  • Working Temperature: -20℃ to 70℃, suitable for most industrial working environments.
  • Protection Rating: IP65, dustproof and waterproof.

Yokogawa YNT511D System Interface Module

Technical Specifications:

  • Communication Protocol: Supports Modbus/TCP, Modbus/RTU, OPC UA, and Ethernet/IP protocols, realizing protocol conversion between different systems.
  • Communication Interface: 2 Ethernet ports (10/100Mbps), 2 RS - 485 serial ports, which can meet the needs of different communication connections.
  • Data Transmission Rate: The Ethernet port can reach 100Mbps, and the RS - 485 port can reach 115.2kbps.
  • Working Voltage: 24V DC, power consumption is 150mA.
  • Working Temperature: -10℃ to 55℃, storage temperature: -20℃ to 60℃.
  • Installation Method: DIN rail installation, which is convenient for integration into the control cabinet.

Yokogawa AAI143-H50 channel Isolated Analog Input Module

Technical Specifications:

  • Number of Channels: 16 isolated channels, no mutual interference between channels.
  • Input Signal: Rated 4-20mA DC current signal, allowable input range 0-25mA DC.
  • Accuracy: ±0.01%, ensuring the accuracy of signal collection.
  • Resolution: 24 bits, which can capture subtle changes in analog signals.
  • Input Impedance: 250Ω when powered on, ≥500kΩ when powered off.
  • Data Update Cycle: 10ms, enabling rapid data refresh.
  • Isolation Voltage: 500V AC between channels and between channels and the backplane.
  • Working Temperature: -10℃ to 55℃.

Yokogawa ALE111-S01 Physical Layer Interface Module for Industrial Communication

Technical Specifications:

  • Interface Type: It is equipped with a KS cable interface adapter, which is suitable for 32 - channel digital signal transmission.
  • Signal Transmission Rate: Up to 10Mbps, meeting the data transmission requirements of general industrial control occasions.
  • Isolation Voltage: 1500V AC, effectively preventing signal interference between the system and field devices.
  • Working Voltage: 24V DC, with a voltage fluctuation tolerance of ±10%.
  • Working Temperature: -20℃ to 70℃, in line with the ISA S71.04 class G3 standard.
  • Power Consumption: 80mA, with low power consumption characteristics.