Shop

You are here:
  1. Home
  2. Shop
  3. Page 773

ABB IMCAM07B0000 Intelligent Servo Drive Controller

Technical Specifications

  • Interface: Supports multiple industrial protocols such as Profibus DP, CANopen, DeviceNet, and others depending on configuration
  • Network Connectivity: Equipped with connectors suitable for different network types including RJ45, M12, and terminal blocks
  • Data Transfer Rate: Varies by protocol, typically supports speeds up to 12 Mbps for high-speed data transmission
  • Operating Voltage: Operates on standard industrial power supplies, commonly 24V DC
  • Power Consumption: Designed for low power consumption, typically less than 5W
  • Operating Temperature: Suitable for operation in a wide range of temperatures, usually from -25°C to +70°C
  • Humidity Range: Can operate effectively in environments with humidity levels from 5% to 95%, non-condensing
  • Dimensions: Compact design suitable for installation in confined spaces within control cabinets
  • Certifications: Complies with international standards for safety and electromagnetic compatibility (EMC)

GE IS210AEBIH3B AE Bridge Interface Board

Technical Specifications

  • Interface Type: Dual Ethernet ports supporting 10/100/1000 Mbps speeds
  • Communication Protocols: Supports standard industrial protocols including Ethernet/IP, Modbus TCP, and GE's proprietary Speedtronic communication protocols
  • Network Redundancy: Features such as Rapid Spanning Tree Protocol (RSTP) or link redundancy to ensure network reliability and continuous operation
  • Data Throughput: High bandwidth capacity to support real-time data exchange between controllers, HMIs, and diagnostic systems
  • Operating Voltage: Typically powered by the backplane within the Mark VIe chassis, with nominal voltage around 3.3V and 5V DC

ProSoft PLX32-EIP-PND EtherNet/IP to PROFINET Gateway

Technical Specifications

  • Supported Protocols: EtherNet/IP and various other protocols (specifics depend on configuration)
  • Network Interfaces:
    • Multiple Ethernet ports supporting 10/100 Mbps speeds for connection to EtherNet/IP networks
    • Additional serial or Ethernet ports for connecting to other network types
  • Data Transfer Rate: Supports up to 10/100 Mbps Ethernet speeds
  • Operating Voltage: Typically operates on 24V DC power supply
  • Power Consumption: Low power consumption suitable for energy-efficient operations
  • Operating Temperature: Designed for use in industrial environments, usually from -25°C to +70°C
  • Humidity Range: Operates effectively in relative humidity levels from 5% to 95%, non-condensing
  • Dimensions: Compact design suitable for installation in control cabinets
  • Certifications: Complies with relevant industry standards such as CE, UL, and others applicable to industrial networking equipment

GE 239-RTD-AN Motor Protection Relay with RTD Inputs

Technical Specifications

  • Sensor Type: Compatible with various RTD types, commonly Pt100 and Pt1000
  • Input Channels: Multiple channels for connecting several RTD sensors simultaneously
  • Measurement Range: Wide range to accommodate different temperature measurement needs, typically from -200°C to +850°C depending on the RTD type
  • Accuracy: High accuracy, often within ±0.1°C or better, ensuring reliable temperature readings
  • Resolution: High resolution for precise measurements, usually up to 16-bit or higher
  • Supply Voltage: Operates on standard industrial power supplies, typically 24V DC

Basler BE3-25A Phase Overcurrent Relay

echnical Specifications

  • Sensor Type: CMOS sensor technology optimized for high-speed and high-resolution image capture
  • Resolution: 25 MP (megapixels), providing detailed images for precise analysis
  • Frame Rate: Up to 30 frames per second at full resolution, ensuring smooth video capture even in fast-moving environments
  • Interface: CoaXPress (CXP) interface, supporting high-speed data transfer rates up to 12.5 Gbps per connection, with support for multiple connections
  • Pixel Size: Typically around 3.45 µm, contributing to high sensitivity and dynamic range
  • Shutter Type: Global shutter, minimizing distortion in moving objects

GE DS200TCQCG1AJD Mark V Series RST Overflow / Analog I/O Expansion Board

Technical Specifications

  • Interface: Designed to interface with various sensors and actuators within a turbine control environment
  • Input Voltage: Operates on standard industrial power supplies, typically 24V DC or 125V DC depending on application requirements
  • Output Channels: Provides multiple output channels for controlling external devices such as valves and motors
  • Communication Protocols: Supports communication protocols relevant to industrial automation, including Modbus and proprietary GE protocols
  • Operating Temperature: Engineered to withstand harsh industrial environments, usually ranging from -40°C to +70°C
  • Humidity Range: Suitable for operation in environments with humidity levels from 0% to 95%, non-condensing
  • Physical Dimensions: Compact design suitable for integration into existing control cabinets
  • Compliance Standards: Meets international safety and EMC standards

ProSoft PLX31-EIP-SIE EtherNet/IP to Siemens Industrial Ethernet Gateway

Technical Specifications

  • Supported Protocols: EtherNet/IP and various other protocols (specifics depend on configuration)
  • Network Interfaces:
    • Multiple Ethernet ports supporting 10/100 Mbps speeds for connection to EtherNet/IP networks
    • Additional serial or Ethernet ports for connecting to other network types
  • Data Transfer Rate: Supports up to 10/100 Mbps Ethernet speeds
  • Operating Voltage: Typically operates on 24V DC power supply
  • Power Consumption: Low power consumption suitable for energy-efficient operations
  • Operating Temperature: Designed for use in industrial environments, usually from -25°C to +70°C
  • Humidity Range: Operates effectively in relative humidity levels from 5% to 95%, non-condensing
  • Dimensions: Compact design suitable for installation in control cabinets
  • Certifications: Complies with relevant industry standards such as CE, UL, and others applicable to industrial networking equipment

FOXBORO FBM233 P0926GX Field Device System Integrator Module

Technical Specifications:

  • The FOXBORO FBM233 P0926GX is designed as an input/output (I/O) module.
  • Supports multiple channels for connecting various external devices and sensors.
  • Capable of handling different types of signals including analog signals (such as voltage or current), digital signals (such as switch status), frequency signals, and communication signals.
  • Features high-speed data acquisition capabilities suitable for high-speed control and data collection applications.
  • Programmable to configure the function of input and output channels to meet different application requirements.
  • Operates within a variety of working voltage ranges to accommodate different power supply requirements.

Waukesha E740401

Product Name​
Detonation Sensing Module / Knock Detection Module
Product Introduction​
Engine control module for industrial gas engines. Detects cylinder knock or detonation and adjusts ignition timing to protect the engine.

GE IC754CSX06CTD QuickPanel+ Operator Interface

Technical Specifications

  1. Core Attributes:
    • Manufacturer: GE Fanuc Automation
    • Series: QuickPanel View
    • Display: 6-inch color TFT touchscreen
    • Resolution: 640 × 480 pixels (primary); 800 × 480 pixels noted in some sources
    • Memory: 128 MB RAM; 32 MB user memory + 96 MB flash memory

CCC IOC-555-D 17-550555-001 Simplex I/O Card / Communication Control Board

Technical Specifications

  1. I/O Configuration:
    • Digital Inputs: 8 channels .
    • Digital Outputs: 8 channels .
    • Analog I/O:
      • 2 analog inputs and 2 analog outputs (per ) .
      • Note:  describes 32 channels total (digital/analog combined), but this conflicts with earlier sources; the 8+8 digital configuration is consistently verified.

ABB PNI800 Plant Network Interface Module

1. Technical Specifications • Dimensions: 243.84 mm depth × 73.66 mm height × 170.18 mm width • Weight: 0.5 kg net • Power Supply: 24 V DC (18–36 V) • Operating Temperature: −25 °C to +70 °C • Environmental: RoHS compliant, G3 corrosive-gas rated • Communication Ports: Two independent Ethernet 10/100 Mbit RJ-45 ports plus two isolated RS-232/RS-485 serial ports • Protocols: Modbus RTU/TCP, Ethernet/IP, PROFINET, PN800/TriStation, IEC 61850 GOOSE, UDP, TCP/IP • Redundancy: Dual-attached node for PRP (IEC 62439) redundant LANs (PN800A & PN800B) • LED Indicators: Link, activity, fault per port