Shop

You are here:
  1. Home
  2. Shop
  3. Page 573

GE PMC-0247RC-282000 350-93750247-282000F Compact Intelligent PLC & I/O Module for GE PACSystems RX3i

1. Technical Specifications • Input power: 24 VDC nominal (18–30 VDC range) • Output type: relay, 10 A maximum per channel • Communication: Ethernet/IP, Modbus TCP, serial RS-232/RS-485 • Processor: high-performance 32-bit CPU • Memory: large-capacity RAM and user Flash for program and data storage • Programming: IEC 61131-3 languages (LD, ST, FBD, SFC, IL) • Isolation: 2.5 kV channel-to-bus, 3 kV channel-to-channel • Dimensions: compact single-slot RX3i form factor, DIN-rail or rack mount • Operating temperature: –20 °C to +60 °C • Humidity: 5 %–95 % RH non-condensing • Protection: IP20 enclosure, vibration 2 g, shock 15 g

BENTLY NEVADA 3500/15 133292-01 LOW-VOLTAGE DC POWER MODULE

1. Technical Specifications • Input voltage range: 20 – 30 VDC • Regulated output: +24 VDC ±1 %, up to 10 A continuous • Efficiency: > 85 % at full load • Isolation: 500 VDC input-to-output • Ripple & noise: < 50 mV p-p (20 MHz BW) • Hold-up time: 20 ms @ 24 V, 10 A load • Operating temperature: −30 °C to +65 °C • Storage temperature: −40 °C to +85 °C • Relative humidity: 0 – 95 % non-condensing • Vibration: 5 g rms, 10 – 2 000 Hz • Shock: 20 g, 11 ms half-sine • Dimensions: 120.7 mm H × 50.8 mm W × 251.5 mm D • Weight: 1.39 kg • Cooling: natural convection within 3500 rack airflow • Protection: over-current, over-voltage, short-circuit, thermal shutdown, automatic restart • Hot-swap capability: supported in redundant configuration • LED indicators: green “Supply OK”, red “Fault”

AMAT 0100-71267 Semiconductor Control Module

1. Product Overview AMAT 0100-71267 is a multifunction board manufactured by Applied Materials. It integrates an embedded wireless-Ethernet bridge and a multi-channel counter/timing engine in a single, compact package designed for semiconductor and general industrial automation systems.

CUTLER HAMMER JD3250F – Industrial Molded Case Circuit Breaker Frame

Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)

GE VMIVME-5576 High-Speed Fiber-Optic Reflective Memory Interface

  1. Hardware Architecture:
    • Core Function: VME-to-VME reflective memory interface for real-time data sharing .
    • Memory Capacity: 256 KB to 1 MB SRAM (configurable) .
    • Data Transfer Rate: Up to 6.2 MB/s .
    • Node Support: Up to 256 independent systems .
    • Bus Compatibility: VMEbus (ANSI/IEEE STD 1014-1987, IEC 821/297) .

FOXBORO FCP280 RH924YA Field Control Processor

Technical Specifications

  1. Hardware Architecture:
    • Processor: PowerPC 604e at 1.2 GHz.
    • Memory: 512 MB SDRAM + 2 GB Flash storage.
    • I/O Capacity: Supports up to 128 Fieldbus Modules, including combinations of 100/200 series FBMs.
    • FBM Limits: Maximum 64 × 100-series FBMs per bus.
    • Power Supply: 24 V DC ±10%.
    • Power Consumption: 10 W.

ABB CI867K01 Communication Interface

Technical Specifications

  1. Electrical & Physical Parameters:
    • Power Supply: 24 V DC ±20%.
    • Power Consumption: ≤4.5 W.
    • Operating Temperature: 0°C to +55°C (storage: -40°C to +85°C).
    • Dimensions: 127.5 mm (H) × 59 mm (W) × 185 mm (D).
    • Weight: 0.7 kg (standard configuration).
    • Protection Rating: IP20 (EN60529/IEC 529 compliant).

ABB PPC907BE 3BHE024577R0101 – Complete Technical Profile

Technical Specifications

  1. Processor & Performance:
    • CPU: PowerPC 604e processor @ 400 MHz .
    • Memory: 256 MB SDRAM + 512 MB Flash storage .
    • I/O Capacity:
      • Digital I/O: Configurable up to 256 points (expandable via modules) .
      • Analog I/O: Supports multiple channels .
    • Execution Speed: Optimized for sub-millisecond scan times .

GE IC698CPE020 Central Processing Unit

Technical Specifications

  1. Processor & Performance:
    • CPU Architecture: High-performance industrial-grade processor (exact chipset unspecified; Intel Atom/PowerPC equivalent inferred) .
    • Memory: ≥10 MB non-volatile flash storage; ≥10 MB user memory (battery-less retention via capacitor backup) .
    • Execution Speed: Sub-millisecond scan times for complex logic (comparable to IC698CPE030’s 0.072 ms/kBoolean instructions) .
    • I/O Capacity: Supports ≥32K discrete I/O points and ≥32K analog words .

GE IC695CPE310 PACSystems RX3i Controller — Full Technical Profile

Technical Specifications

  1. Processor & Performance:
    • CPU: 1.1 GHz Intel Atom processor.
    • Memory: 10 MB non-volatile flash storage; 10 MB user memory (battery-less retention via Energy Pack).
    • Execution Speed: 0.072 ms per 1,000 Boolean instructions.
    • I/O Capacity: Supports 32K discrete I/O points and 32K analog words.