Shop

You are here:
  1. Home
  2. Shop
  3. Page 541

AMAT 0020-46516

  • Product Introduction: This module is a core component in high - end semiconductor manufacturing equipment. It is specifically designed to handle the complex and precise operations required in modern semiconductor fabrication. Its development is aimed at meeting the increasing demands for smaller feature sizes and higher production yields in the semiconductor industry.
  • Technical Specifications:
    • Material Composition: Constructed from a proprietary blend of high - purity ceramics and metals. The ceramics provide excellent thermal insulation and chemical resistance, while the metals offer high strength and electrical conductivity.

AMAT 0150-04723

Product Name: Wafer Transfer Robot Blade and End Effector Product Introduction: This component is part of the factory automation or internal tool handling system (e.g., on an Endura cluster tool or a standalone clean track). The "Blade" is the flat, extended arm that slides under the wafer. The "End Effector" is the mechanism at the tip of the blade that holds the wafer. It typically uses vacuum channels or mechanical fingers to secure the wafer during transport between cassettes, aligners, and process chambers. Technical Specifications:

  • Material: PEEK (Polyether ether ketone), PFA, or Carbon Fiber composite for low particle generation and high stiffness.

AMAT 0021-42306

Product Introduction: This part is a fluid handling component used in the gas delivery system (Gas Box) of Applied Materials tools. A Mass Flow Controller (MFC) precisely measures and controls the flow rate of a specific process gas (precursor or carrier gas) entering the chamber. This specific part number likely refers to a high-precision MFC module, potentially for reactive or corrosive gases, featuring digital communication and closed-loop control. Technical Specifications:

  • Flow Range: Various ranges available (e.g., 10 sccm, 100 sccm, 1000 sccm, 5 slm) depending on the gas and process.

AMAT 0040-20124

Product Name: Vacuum Chamber Liner and Shielding Kit Product Introduction: This kit consists of the consumable internal shielding components of a process chamber (e.g., for Etch or CVD). The "Liner" is the cylindrical wall coating that protects the main chamber body (usually stainless steel) from corrosive plasma byproducts and sputtering. The "Shield" covers the top and bottom areas. These parts are sacrificial; they are coated with film over time and must be cleaned or replaced periodically to prevent particle fall-off and electrical arcing. Technical Specifications:

  • Material: Anodized Aluminum, Yttrium (Y), or Silicon Carbide (SiC) coated graphite for extreme resistance.

AMAT 0020-78186

Product Name: Electrostatic Chuck (ESC) with Heater and Gas Channel Assembly Product Introduction: This is a core consumable/component for Applied Materials' Producer, Centura, and Endura platforms. The Electrostatic Chuck (ESC) is the "platform" inside the vacuum chamber where the wafer sits. It uses high-voltage electrostatic force (Johnsen-Rahbek effect) to clamp the wafer firmly in place. It also incorporates a backside helium cooling system, resistive heaters for wafer temperature control, and often lift pins for wafer transfer. Technical Specifications:

  • Clamping Voltage: High voltage DC (typically 500V to 2000V) applied via a dielectric layer.

AMAT 3300-07824

Product Name: Optical Endpoint Detection System Module Product Introduction: This component is part of the Applied Materials metrology or process control suite, often found in Etch or CMP tools. It is an optical emission spectroscopy (OES) or laser interferometry system used for "Endpoint Detection." The system monitors the light emitted by the plasma or the interference pattern of a laser beam reflecting off the wafer surface to determine exactly when a specific layer has been completely etched or polished away. Technical Specifications:

  • Sensor Type: CCD array spectrometer or high-speed photodiodes.

AMAT 0020-21104

Product Name: RF Generator and Match Network Sub-Assembly Product Introduction: This part number refers to a critical RF power delivery component used across various Applied Materials platforms (Etch, CVD, PVD). It typically comprises the RF Generator (solid-state or tube-based) and the Automatic Match Network (AMN). The system generates the radio frequency energy required to create and sustain plasma within the process chamber and ensures maximum power transfer by dynamically matching the impedance of the plasma load to the generator. Technical Specifications:

  • Frequency Range: Covers standard industrial frequencies (2 MHz, 13.56 MHz, 27 MHz, 40 MHz, 60 MHz) and VHF bands.

AMAT 0050-32172

Product Name: CMP Polishing Pad and Retaining Ring Kit Product Introduction: This kit includes consumable components for Applied Materials' Mirra or Reflexion Chemical Mechanical Planarization (CMP) systems. The kit typically consists of a polyurethane polishing pad (often with a fixed-abrasive or slurry-based surface) and a retaining ring made of a composite material. The pad provides the mechanical abrasion while the retaining ring holds the wafer against the pad to ensure uniform material removal across the entire wafer surface.

AMAT 3700-03788

Product Name: Inductively Coupled Plasma (ICP) Source Coil Assembly for Etch Systems Product Introduction: This part is a major sub-assembly for Applied Materials' Kiyo or Flex系列 Etch products. It is the ICP source module (often called the "Top Source" or "Coil Box") that generates high-density plasma for high-aspect-ratio etching. The assembly includes the RF antenna coil, dielectric window, and matching network components. It is responsible for dissociating process gases into reactive radicals and ions to etch silicon, metals, or dielectrics with high anisotropy. Technical Specifications:

  • RF Frequency: Operates at standard ICP frequencies (e.g., 13.56 MHz or 27 MHz) with power capabilities up to 3000W-5000W.

AMAT 0021-55107

Product Name: Precision Gas Delivery Showerhead for Chemical Vapor Deposition (CVD) Product Introduction: This component is a precision-engineered showerhead assembly used in Applied Materials' Producer or Centura CVD systems. It serves as the top electrode and gas distribution manifold in a capacitively coupled plasma reactor. The showerhead controls the injection of process gases (precursors) into the reaction chamber, ensuring uniform mixing and laminar flow before the gases react to form a thin film on the wafer surface.

AMAT 0100-00195

Product Name: Advanced Sputtering Target Assembly for Physical Vapor Deposition (PVD) Systems Product Introduction: This component is a critical spare part designed for Applied Materials' Endura series or similar PVD platforms. It functions as the source material (target) which is bombarded by ions to eject atoms that then deposit onto a semiconductor wafer. This specific part number typically refers to a specialized target assembly, often involving complex bonding interfaces for thermal management and structural integrity during high-power sputtering processes. It is engineered for the deposition of conductive barrier layers or seed layers in copper interconnect fabrication.

AMAT 0021-01996

Product Name: Sputtering Target Assembly (Bonded Type) Product Introduction: This is the source material for Physical Vapor Deposition (PVD). The target is the material that is bombarded by ions, causing atoms to be ejected (sputtered) and deposited onto the wafer. This specific part number likely refers to a "bonded" target, where a thin layer of the expensive functional material (e.g., Copper, Tantalum) is bonded to a backing plate (usually Copper or Aluminum) using a diffusion bonding or soldering process. The backing plate provides structural support and acts as a heat sink to prevent the target from melting during high-power sputtering.