Shop

You are here:
  1. Home
  2. Shop
  3. Page 44

GE DS3800NMEC1H1H

Product Name:​ Mark VIe CPU Board / Main Processor and Communication Controller
Product Overview:​ The GE DS3800NMEC1H1H is the primary CPU controller board for the Mark VIe Speedtronic series, used extensively in heavy-duty gas and steam turbine control applications. This VMEbus form-factor processor handles real-time execution of turbine sequencing, fuel control, and protection logic in power generation and industrial drive environments.

GE DS3800NGPA1B1C

Product Name:​ General Purpose Amplifier (NGPA) Board / Gas Turbine Control Board
Product Overview:​ The GE DS3800NGPA1B1C is an analog signal conditioning and scaling hub built for legacy Speedtronic Mark IV turbine control panels. Functioning as a dedicated General Purpose Amplifier (NGPA) board, this module is engineered to accept low-level analog inputs from field sensors—such as pressure transducers, LVDTs, and temperature transmitters—and amplify them into clean, high-level linear signals compatible with the system's central logic processors.

GE DS200UPSAG1AGD

Product Name:​ Power Supply Board
Product Overview:​ The GE DS200UPSAG1AGD is a power supply board for drive control circuits. It provides regulated DC power to drive control circuits and converts 24V DC input into multiple isolated output voltages. The unit mounts inside the drive cabinet as a secondary power source.

GE DS200TCQCG1AHE

Product Name:​ RST Overflow Board
Product Overview:​ The GE DS200TCQCG1AHE belongs to the Mark V series. General Electric designed this board as an RST overflow unit. This component monitors signal levels and triggers reset events. It also prevents data overflow in critical control loops.

GE DS200NATOG3ACB

Product Name:​ Voltage Feedback Scaling Board
Product Overview:​ The DS200NATOG3ACB is a voltage feedback scaling board developed by GE for the Mark V turbine control system. Its primary function is to attenuate and scale AC and DC voltage feedback signals from the SCR bridge, allowing the control system to obtain useful voltage feedback without directly exposing low-level control electronics to the original high-voltage signal.

GE DS3820FEXB1A1A

Product Name:​ GE Fanuc Series 90-70 High-Speed Counter Module
Product Overview:​ The DS3820FEXB1A1A is a 4-channel high-speed counter function module designed by GE Fanuc for the Series 90-70 PLC system, dedicated to encoder signal acquisition, pulse counting, and speed measurement in high-speed signal processing scenarios.
Technical Specifications:
  • Channels: 4 independent high-speed counters

GE F0P3KHF35

Product Name:​ GE Fanuc Series 90-30 32-Point 24VDC Digital Input Module
Product Overview:​ The F0P3KHF35 is a digital input module specially designed for the GE Fanuc Series 90-30 PLC system. It belongs to the F0P series of basic I/O modules, used to acquire field switch signals and transmit them to the PLC processor for logic operation processing.
Technical Specifications:
  • Channels: 32 points

GE 104X106MAG01

Product Name:​ GE Fanuc 90-30 / 90-70 Series Analog Input Module
Product Introduction:​ This module is an analog input I/O module designed by GE Digital (formerly GE Fanuc Automation) for the 90-30 / 90-70 programmable logic controller (PLC) series. It provides 16 independent analog signal acquisition channels for distributed control systems, SCADA data acquisition, and industrial process control.

GE 5BPA56RAG8

Product Name:​ GE Direct Current Motor (Permanent Magnet, 1 HP)
Product Introduction:​ Based on available parts distribution records, this model is identified as a GE permanent magnet DC electric motor. The "5BPA" nomenclature follows GE's DC motor frame size and specification coding.
Technical Specifications:
  • Horsepower:​ 1 HP

GE TG3226

Product Name:​ General Duty Safety Switch (Fusible Disconnect Switch)
Product Introduction:​ This is a general duty safety switch designed for residential and light commercial applications where duty is not severe. Listed to UL Standard 98 for enclosed and dead-front switches, it is suitable for use as service equipment when installed per the National Electrical Code.

GE IS420PFFAH1B

Product Name:​ Mark VIe Foundation Fieldbus I/O Module (FF H1)
Product Introduction:​ This module is a high-integrity Foundation Fieldbus I/O pack for GE's Mark VIe distributed control and turbomachinery systems. It enables digital communication between the control system and field devices (sensors, actuators) using the Foundation Fieldbus protocol, replacing traditional analog 4–20 mA signals.

GE IS420PVIBH1B

Product Name:​ Mark VIe Vibration I/O Pack (API 670 Compliant)
Product Introduction:​ This is a specialized high-speed vibration monitoring I/O pack engineered for the GE Mark VIe turbine control platform. It provides real-time machinery protection by acquiring dynamic signals from proximity probes, seismic sensors, and accelerometers on gas turbines, steam turbines, and industrial compressors.