Digital guide
You are here:
Honeywell 51195066-100
Product Name: Experion PKS C300 Controller Power Supply Module
Overview:
The Honeywell 51195066-100 is a system power supply module purpose-built for the Experion PKS C300 controller platform. It provides stabilized 24 VDC power with hot-swap capability, enabling maintenance personnel to replace a faulty unit without shutting down the system.
Detailed content
Technical Specifications:
- Input Voltage: 85–264 VAC, 47–63 Hz (wide-range auto-adaptive) or 88–300 VDC
- Output Voltage: 24 VDC ±2%
- Max Output Current: 10 A continuous (12 A peak short-time)
- Output Power: 240 W typical
- Efficiency: >85% at typical load
- Redundancy: 1+1 or N+1 (requires redundant backplane)
- Protection: Over-voltage, over-current, short-circuit, and over-temperature automatic protection
- Status Indicators: LED display for Power OK, Fault, Input OK
- Mounting: Insert into dedicated C300 controller or I/O rack power slot; hot-swappable
- Operating Temperature: 0°C to +60°C
- Certifications: CE, UL 61010-1, CSA C22.2 No. 61010-1, IEC 61010-1
Features:
- Wide input voltage range compatible with global grid fluctuations and DC emergency power.
- 1+1 redundancy support for high availability and zero single-point failure.
- Hot-swappable design for zero-downtime maintenance.
- Multi-layer protection mechanisms prevent power faults from triggering cascaded shutdowns.
- Power state can be uploaded to the operator station via the C300 controller.
- Also used to power the Honeywell Control Firewall in cyber-secure isolation architectures.
Applications:
- Experion PKS C300 controller cabinets.
- I/O racks within the Experion PKS ecosystem.
- Control firewall power feeding in secure network segregation designs.
Installation & Notes:
- Insert firmly into the dedicated power slot of the C300 controller or I/O rack.
- For redundant deployment, ensure a compatible redundant backplane is used.
- Observe LED indicators during operation; “Fault” LED signals protective shutdown or internal anomaly.
- Operating temperature must be maintained within 0°C to +60°C.
