Digital guide
You are here:
Honeywell MC-TAIH02 51304453-150
Product Overview:
The Honeywell 51304453-150 MC-TAIH02 is a high-performance 16-channel analog input module with STI (Self-Test Interface), engineered for the TotalPlant Alcont (TPA) and TDC 3000 distributed control system platform. It functions as a high-level analog input (HLAI) module featuring integrated compression terminals. This industrial-grade module delivers precise signal acquisition with exceptional reliability for critical process automation applications, providing stable, drift-resistant thermocouple signal conditioning.
Detailed content
Technical Specifications:
- Manufacturer: Honeywell
- Model: MC-TAIH02
- Module Type: High-Level Analog Input (HLAI) with Compression Terminals
- Input Channels: 16 channels (differential analog inputs)
- Input Signal Types: 4–20 mA, 1–5 V DC, thermocouples, RTDs
- Resolution: 16-bit A/D conversion
- Accuracy: ±0.1% of full scale
- Isolation: Channel-to-channel and channel-to-bus
- Connection Type: Compression terminal blocks
- Operating Temperature: 0 °C to +60 °C (32 °F to 140 °F)
- Humidity Tolerance: 5% to 95% RH, non-condensing
- Power Consumption: 5 W typical
- Compatibility: TDC 3000, Experion PKS, Process Manager, TotalPlant Alcont (TPA), HPM, PM, APM subsystems
- Communication: TDC 3000 UCN / LCN backplane bus
- Module Weight: 1 kg
- Safety Compliance: Designed for SIL-capable process control architectures
- Diagnostic Features: STI self-test interface, fault detection, EMI/RFI protection
Functional Characteristics:
The module’s high-level thermocouple input capability supports a wide range of thermocouple types, ensuring flexibility across multi-zone temperature monitoring applications without compromising measurement accuracy or response time. Galvanic isolation protects against electrical noise and ground loops. The module features a hot-swappable design for replacement without system shutdown.
Installation Requirements:
Always wear an approved ESD wrist strap connected to an appropriate ground before handling the module. Ensure the power to the target card file or rack is turned off before inserting the module, unless the system chassis explicitly supports hot-swapping. Use recommended wire gauges for the compression terminals. Strip back wires to the specified length to avoid short circuits, and ensure the terminal screws are tightened to the torque values specified in the system manual. Ensure shield wires from field transmitters are properly grounded at a single point, typically at the control cabinet’s instrument ground bar.
Application Scenarios:
Petrochemical reactors and refining units. Power generation turbine control loops. Metallurgical furnace management. Water treatment dosing systems. Oil & gas refining and distribution control. Chemical and petrochemical manufacturing systems. Pulp and paper processing machinery.
