Digital guide
You are here:
Kollmorgen SCB03250
-
Product Name: S600 brake-control option card
-
Family Function: Plugs into the option slot of S60100 / S60300 / S60600 / S61000 drives; provides a reinforced-isolated 24 VDC fail-safe holding-brake output sequenced by drive logic (brake releases after current build-up and zero-speed confirmation, engages before rotor stop on disable).
Detailed content
-
Electrical:
-
Brake supply derived from drive 24 VDC logic rail
-
Output 24 VDC, internally fused, short-circuit protected
-
Reinforced isolation 500 VAC between logic bus and brake circuit
-
-
Mechanical: PCB submodule with edge connector and clip retainer, weight ~0.08 kg, no separate enclosure.
-
Compatible Drives: S60600-SE and all S6xx00 variants with brake option enabled in firmware.
-
Application: Required when an AKM motor with 24 VDC electromagnetic holding brake is driven by S600 (AKD handles brake natively on the BRK terminal, no SCB needed).
-
Installation:
-
Insert only with AC/DC bus fully discharged
-
Brake leads shielded, routed away from PWM power cables
-
Shield grounded at drive end
-
-
Note: Not a standalone amplifier; firmware must have brake function licensed/enabled.
