Technical Specifications:

• Part Number: 1210880V5 (Revision 5)
• Voltage: 220-240V AC / 50Hz
• Power Rating: 20W – 40W (typical for timer/pump motor)
• Speed: 1400 RPM (pump) / 4-6 RPM (timer drive)
• Insulation Class: Class B (130°C)
• IP Rating: IPX4 (splash-proof)
• Bearing Type: Sleeve bearing / Ball bearing
• Shaft Diameter: 5mm – 8mm (varies by variant)
• Weight: Approximately 250g – 400g

Functional Features:

• Drain Pump Function: Evacuates wash water from drum at end of cycle.
• Timer Drive Function: Mechanically advances program timer cam at set intervals.
• Thermal Protection: Built-in thermal fuse prevents motor burnout.
• Universal Mounting: Compatible with multiple AEG washing machine models (LAVAMAT series).

Material Composition:

• Stator Core: Silicon steel laminations (0.5mm)
• Windings: Enameled copper wire (Class B insulation)
• Rotor: Aluminum die-cast squirrel cage
• Housing: Glass-fiber reinforced polyamide (PA66-GF30)
• Shaft: Stainless steel AISI 303
• Impeller (pump variant): Technopolymer (PPS/PA66 blend)

Structural Features:

• Cylindrical motor body with mounting flange.
• Electrical connector (typically 2-pin or 3-pin spade connectors).
• Impeller housing integrated (pump variant).
• Rubber vibration dampening feet.

Working Principle:
AC voltage applied to stator windings creates a rotating magnetic field. This induces current in the aluminum squirrel-cage rotor, producing torque. In pump variant, the rotating shaft drives a centrifugal impeller that pushes water out through the drain hose. In timer variant, the motor advances a mechanical cam that switches electrical contacts to progress the wash program. The thermal fuse opens the circuit if winding temperature exceeds 150°C.

Key Advantages:

• OEM exact-fit replacement — revision V5 ensures compatibility.
• Thermal fuse protection — prevents fire hazard from locked rotor.
• IPX4 rated — resistant to splash water.
• Long service life — Class B insulation rated for 20,000+ hours.

Applicable Industries/Use Cases:
AEG LAVAMAT washing machines, AEG dishwashers, appliance repair workshops, OEM spare parts distribution.

Installation Requirements:

• Disconnect appliance from mains before replacement.
• Align motor shaft with pump impeller or timer cam.
• Secure with original mounting screws (typically M4 × 10mm).
• Connect electrical plug fully — partial connection causes overheating.

Usage Precautions:

• Check for blocked impeller before installing new motor (blockage causes burnout).
• Verify part number 1210880V5 matches exactly — do not use V1-V4 revisions interchangeably.
• Do not run motor dry (pump variant) — always ensure water is present.
• Replace thermal fuse if blown — do not bypass.