Digital guide
You are here:
Kollmorgen S70602-PBNANA
-
Product Name: S700 Series Digital Servo Amplifier, 6 A Continuous, EtherCAT Interface
-
Product Introduction: The S70602-PBNANA is part of Kollmorgen’s S700 (often cross-referenced with AKD-era replacements) high-performance digital servo amplifier line. It supports EtherCAT communication and is suitable for retrofitting or integrating with Kollmorgen AKM motors.
Detailed content
-
Key Specifications:
-
Continuous Output Current: 6 A RMS
-
Peak Output Current: 18 A RMS (1 s)
-
Input Supply: 3 × 208–480 VAC ±10%, 50/60 Hz (or DC bus 100–480 VDC range)
-
Rated Power: ~2.5 kW @ 400 V
-
Fieldbus: EtherCAT (RJ45, 100 Mbps, distributed clocks)
-
Feedback Supported: EnDat 2.2/2.1, BiSS-C, Hiperface DSL, SSI, incremental encoder, resolver
-
Safe Torque Off (STO): SIL2 / PL d (IEC 61800-5-2)
-
Control Modes: Torque, Velocity, Position, Cyclic Synchronous Position (CSP)
-
Protection: Overvoltage, overcurrent, thermal, phase loss, short circuit
-
Mounting: Panel mount (TS-35 DIN rail adapter available)
-
Protection Rating: IP20
-
Operating Temp: 0 to +45 °C (derate above 40 °C)
-
Dimensions: approx. 60 mm × 298 mm × 185 mm
-
-
Applications: High-dynamic single/multi-axis machines — semiconductor wafer handling, flying shear, electronic assembly.
-
Notes: When replacing with AKD series, model AKD-x00606 is the functional equivalent. Requires Kollmorgen WorkBench or S700 Setup Software for commissioning.
