Digital guide
You are here:
Kollmorgen CR10260
Product Introduction: CR-prefixed parts in Kollmorgen’s cable catalog are pre-manufactured interconnection cables for AKM servomotors — either power-only, feedback-only, or combo. CR10260 is a standard-length (verify from order — often 3 m / 6 m / 9 m selectable via suffix not shown here) shielded cable with Intercontec motor-side connector and drive-side flying leads or D-sub/M12 as applicable.
Detailed content
-
Typical Characteristics:
-
Conductor: Tinned copper, color-coded
-
Shielding: Overall braided copper shield (≥85 % coverage) for EMI suppression
-
Jacket Material: PVC (standard) or PUR (flex-rated versions available)
-
Bending Radius (static/flex): min. 5 × cable diameter (flex); 3 × (static)
-
Temperature Range: -25 to +80 °C (PVC); -40 to +80 °C (PUR flex)
-
Flame Retardant: UL AWM / CSA / CE compliant
-
Connector (Motor End): Intercontec 17-pin (power+feedback combo) or separate 7-pin power + 12/17-pin feedback depending on exact CR variant
-
Drive End: Screw terminals or pre-installed circular connectors matching AKD/X series terminal blocks
-
-
Installation: Route separately from high-power AC lines (> 15 cm spacing or use metal conduit). Both ends must be grounded. Verify pinout against AKD AKM cable diagram before energizing.
