Digital guide
You are here:
Kollmorgen N2-D-120-8A-12-MF1-FT1E-QX
-
Product Name: N2 series linear actuator / electric cylinder (rod-style)
-
Product Introduction: Industrial linear positioning actuator with ball or roller screw, designed for servo motor direct coupling.
-
Technical Specifications (typical decode):
-
Series: N2 (Kollmorgen linear actuator family)
-
Detailed content
-
-
Screw/Ball Type: D = specific screw variant
-
Stroke: 120 mm
-
Rated Load: 8A denotes load/force class (approx. 8 kN class depending on screw)
-
Motor Mount: 12 = flange/motor adapter size
-
Gear/Transmission: MF1 = metric flange 1
-
Sealing/Options: FT1E = seal/feedback option
-
Connector/Config: QX = special cable or encoder tail
-
Typical Rating: IP grade depends on FT option; rated for servo motor up to AKM5x class
-
-
Functional Features: High repeatability linear motion; compatible with AKM servo motors; optional brake and feedback integration.
-
Application Scenarios: Pressing, lifting, valve actuation, test rigs, packaging ejectors.
-
Installation Requirements: Align load axially to avoid side load on screw; mount motor with coupling within tolerance; lubricate per manual.
-
Usage Notes: Do not exceed 120 mm stroke; observe duty cycle for 8 kN load; use servo drive with correct force/torque limit.
Cross-System Notes
-
Compatible Pairing: AKM21C / AKM52L / AKM64L motors pair with AKD-P00606-NBE (low/mid power), S20330-SRS12 (low voltage DC), or ATS-614-AS (mid power AC). CR03200 modules provide PLC/motion supervision over EtherCAT to AKD/S600 drives.
-
General Safety: All drives are IP20 — cabinet only. Motors IP20/IP54/IP65 vary — match environment. Feedback type must be set in drive before enable. Bus voltage must not exceed motor max (320 VDC for AKM2x C-winding, 640 VDC for AKM5x/6x C-winding).
-
Commissioning: Use Kollmorgen WorkBench for AKD, S200/S600 software for legacy drives, CR Automation Suite for CR controllers. Load electronic nameplate file (.kmf) when available.
