Digital guide

You are here:
  1. Home
  2. GE
  3. GE DS200UPSAG1AGD

GE DS200UPSAG1AGD

Product Name:​ Power Supply Board
Product Overview:​ The GE DS200UPSAG1AGD is a power supply board for drive control circuits. It provides regulated DC power to drive control circuits and converts 24V DC input into multiple isolated output voltages. The unit mounts inside the drive cabinet as a secondary power source.
WhatApp
WeChat

Detailed content

Technical Specifications:
  • Brand: GE Energy
  • Models: DS200UPSAG1A, DS200UPSAG1AGD
  • Product Family: Mark V / Drive Control
  • Category: Power Supply Board
  • PCB Layer Count: 6 layers
  • Base Material: High-Tg FR-4
  • Input Voltage: 24V DC nominal (18V to 32V)
  • Input Current: 2.1A typical at full load
  • Output Voltage 1: +5V DC @ 4A continuous
  • Output Voltage 2: +15V DC @ 1A continuous
  • Output Voltage 3: -15V DC @ 0.5A continuous
  • Output Voltage 4: +24V DC (isolated) @ 0.5A continuous
  • Total Output Power: 50 Watts maximum
  • Efficiency: Approximately 88%
  • Hold-up Time: 10 ms at full load
  • Ripple: ≤ 30 mV peak-to-peak
  • Component Count: Approximately 120 components
  • Integrated Circuits: 14 ICs (DC-DC converters, PWM)
  • Connector Types: 2 x 20-pin headers, 1 x terminal block
  • Status Indicators: 2 x LEDs (PWR, OK)
  • Energy Storage: 6 x electrolytic capacitors (150 µF each)
  • Dimensions: 2.5 cm x 10.8 cm x 12.7 cm
  • Weight: 0.1 kg
  • Operating Temperature: 0°C to 55°C
  • Mounting: 4 x screw holes (M4)
Functional Features:
  • Converts 24V DC input into four regulated output voltages
  • Provides +5V at 4 amps for logic and processor circuits
  • Delivers ±15V for analog circuitry and op-amps
  • Provides an isolated +24V output for auxiliary field devices
  • Achieves approximately 88% efficiency under normal load conditions
  • Output ripple stays below 30 millivolts for clean DC power
  • Provides full isolation between input and output circuits
  • Includes overcurrent and short circuit protection
Working Principle:​ The board converts 24V DC input into four regulated output voltages. It provides +5V at 4 amps for logic and processor circuits. The board also delivers ±15V for analog circuitry and op-amps. An isolated +24V output powers auxiliary field devices.
Application Scenarios:​ Engineers use this power board for drive control circuit power distribution. It provides multiple voltages from a single 24V DC source. This component also works in legacy drive upgrade projects. Its 50-watt capacity suits medium-sized control power requirements.
Installation & Usage Notes:
  • Mount this board using four M4 screws with insulating standoffs
  • Connect the 24V DC input to the designated terminal block
  • Use 18 AWG or larger wire for the DC supply connection
  • The board automatically generates all output voltages upon power-up
  • Do not exceed the maximum output current on any rail
  • Verify all output voltages before connecting sensitive loads
  • Always power down the system before inserting or removing this board

You may also like