Digital guide

You are here:
  1. Home
  2. GE
  3. GE F0P3KHF35

GE F0P3KHF35

Product Name:​ GE Fanuc Series 90-30 32-Point 24VDC Digital Input Module
Product Overview:​ The F0P3KHF35 is a digital input module specially designed for the GE Fanuc Series 90-30 PLC system. It belongs to the F0P series of basic I/O modules, used to acquire field switch signals and transmit them to the PLC processor for logic operation processing.
Technical Specifications:
  • Channels: 32 points
WhatApp
WeChat

Detailed content

  • Input Voltage: 24VDC
  • Input Type: Source/Sink configurable
  • Isolation: Per-channel electrical isolation
  • Input Current: Typical 3.2mA (at 24VDC)
  • ON-state Voltage Range: 11VDC ~ 30VDC
  • OFF-state Voltage Range: 0VDC ~ 3VDC
  • Response Time: ON→OFF / OFF→ON ≤1ms (typical)
  • Operating Temperature: -20°C ~ +70°C
  • Storage Temperature: -40°C ~ +85°C
  • Relative Humidity: 5% ~ 95% non-condensing
Functional Features:
  • Supports 32 independent digital input signal acquisition channels
  • Channel-level electrical isolation effectively suppresses field interference
  • Front-end status indicator LEDs for easy field diagnosis
  • Supports hot-swappable replacement (requires enabling in system configuration)
  • Compatible with 90-30 PLC rack backplane bus communication
Structural Features:​ Standard 90-30 series module dimensions, adaptable to IC693/IC695 series racks. Front-end connector uses standard screw terminal block supporting direct wire connection. Module housing is made of engineering plastic with flame retardant rating. Backplane connection adopts gold-finger slot structure.
Material Composition:
  • Housing: Flame-retardant ABS engineering plastic (UL94 V-0 rated)
  • Terminals: Brass with nickel plating
  • PCB: FR-4 epoxy glass fiber substrate
  • Connector: Standard DIN rail mounting
Working Principle:​ Field 24VDC switch signals are converted to internal TTL level signals through front-end optocoupler isolation circuit, transmitted to the 90-30 PLC CPU module via the backplane bus. The CPU reads each channel state during the scan cycle and executes user program logic.
Application Scenarios:​ Power generation, petrochemical industry, water treatment, manufacturing line control, packaging machinery, HVAC systems.
Installation Requirements:
  • Install in standard GE Fanuc 90-30 PLC rack (IC693CHS393, etc.)
  • Ensure module is fully inserted into backplane slot and locked in place
  • Disconnect system power before wiring
  • Recommended wire cross-section: 0.5mm² ~ 2.5mm²
Usage Notes:
  • Strictly supply 24VDC, do not connect signals exceeding rated voltage
  • Do not plug or unplug modules while powered
  • Regularly check terminal screw tightness
  • Avoid using unshielded wiring in strong electromagnetic interference environments

You may also like