Digital guide
You are here:
Kollmorgen P01207-NBE
Product Name: AKD-P01207-NBE — AKD® Digital Servo Drive, 12 Arms Continuous, 3Ø 208–480 V AC, EtherCAT® interface, No Built-in Brake Resistor
Product Description:
Mid-range AKD drive for 400/480 V three-phase systems. Equipped with EtherCAT (CoE) motion bus. “N” = North America region label; “B” = EtherCAT; “E” = no internal shunt resistor (external regen resistor must be connected if significant overhauling load exists).
Detailed content
Technical Specifications:
-
Supply Voltage: 3Ø 187 … 528 V AC (nominal 208–480 V AC), 50/60 Hz
-
Control Logic: 24 V DC (isolated)
-
Continuous Output Current: 12 A RMS
-
Peak Output Current: 30 A RMS (5 s)
-
Continuous Output Power: approx. 8000 W (at 480 V)
-
Feedback Devices: EnDat 2.2, BiSS-C, SFD, SinCos, incremental encoder, HIPERFACE, resolver
-
Motion Bus: EtherCAT (CANopen optional on some -NBx variants; this -NBE is EtherCAT)
-
Digital I/O: 8 optically isolated inputs, 4 outputs (screw terminal)
-
Analog I/O: 2 × ±10 V inputs
-
Safe Torque Off (STO): Available as option on -NBEC variants (this -NBE may not include certified STO — check suffix)
-
Ambient Temperature: 0 … +40 °C (derate to 55 °C)
-
Protection: IP20, cabinet mount
-
Dimensions: approx. 196 × 72 × 187 mm (W×H×D without connectors)
-
Weight: approx. 2.0 kg
Features:
-
Sub-microsecond synchronization via EtherCAT Distributed Clocks
-
Autotuning, anti-resonance filtering, notch filters
-
Plug-and-play motor ID with Kollmorgen AKM family
-
Up to 32 motion indexes/tasks stored locally
Installation Note: Mount with ≥30 mm top/bottom clearance for convection cooling; connect motor shield to PE; use ferrite cores on feedback cables if noise is present.
