Digital guide
You are here:
Honeywell 51304907-200
Product Name: Printer Interface Board (SPC II I/O Printed Circuit Board)
Overview: A dedicated I/O expansion card designed for seamless printer and peripheral integration within Honeywell TDC 3000 distributed control systems. Installed as part of the SPC II I/O architecture, this board enables dependable transmission of operational data, alarms, and system reports from the control system to external output devices.
Detailed content
Technical Specifications:
- Module Classification: Printer Interface Board, SPC II I/O Printed Circuit Board
- System Compatibility: Honeywell TDC 3000 Distributed Control System
- Power Requirements: Nominal 24 VDC supply
- Current Draw: Approximately 1 A
- Communication Support: Serial and industrial communication interfaces; protocol availability dependent on system configuration and host controller
- Operating Temperature Range: −40 °C to +70 °C
- Mechanical Form Factor: Compact PCB form factor suitable for TDC 3000 racks
- Dimensions: 2 × 13 × 23.7 cm
- Weight: 0.23 kg
Core Functions: Serves as a communication bridge between the TDC 3000 system and connected printers or output peripherals for:
- Real-time event and alarm printing
- Operational and historical report output
- System diagnostics and maintenance records
- Peripheral data exchange through supported interfaces
Design and Reliability Features:
- Stable Data Transmission: For continuous printer operation
- Noise Resistance: Resists electrical noise typical of control cabinets
- Wide Thermal Tolerance: For harsh plant conditions
- Modular Hardware Layout: Enabling rapid replacement
Application Scenarios: Control room printer interfaces for alarms and reports; process event logging in refineries and chemical plants; historical data output in power generation facilities; system documentation support in legacy TDC 3000 installations.
Installation Requirements: Installed as part of the SPC II I/O architecture within Honeywell TDC 3000 racks. The board is specifically designed for Honeywell TDC 3000 architectures that support SPC II I/O modules; system configuration should be verified prior to installation.
Usage Notes: Configuration is typically handled through the host TDC 3000 system; no standalone firmware is required on the board itself. Compatibility with non-Honeywell printers depends on the communication interface and protocol configured within the control system; printer specifications should be reviewed for alignment.
