Digital guide

You are here:
  1. Home
  2. GE
  3. GE DS3820PMM

GE DS3820PMM

Product Name: GE DS3820 Series Power Supply Module (Mark V / Mark VI Distributed I/O Platform)
Product Introduction: The DS3820PMM belongs to GE’s DS3820 series of power supply modules designed for the DS3800/DS3820 distributed I/O platform used in Mark V and Mark VI turbine control systems. It provides stable DC working power to all modules within the I/O rack.
WhatApp
WeChat

Detailed content

Technical Specifications (DS3820 series power supply parameters):
  • Main Output: +5V DC, ≥10A
  • Auxiliary Output: +24V DC (optional, for field sensor power)
  • Input Voltage: 85-264V AC wide range
  • Input Frequency: 47-63 Hz
  • Efficiency: ≥85% typical
  • Isolation: ≥1500V DC between input and output
  • Overvoltage Protection: Auto-shutdown at +5.5V DC
  • Overcurrent Protection: Triggers at 120% of rated output
  • Short-circuit Protection: Continuous, auto-recovery
  • Operating Temperature: 0°C to 60°C
  • MTBF: ≥100,000 hours
Functional Features:
  • Wide-range AC input adapts to global power standards
  • Complete input/output isolation for control system safety
  • Multiple protection mechanisms (overvoltage, overcurrent, short-circuit, overtemperature)
  • Hot-swappable module—does not interrupt power to other modules
  • High-efficiency design with low heat dissipation
Material Composition:
  • Housing: Flame-retardant ABS with aluminum heatsink (UL94 V-0)
  • PCB: FR-4 multi-layer board with large copper foil heat dissipation design
  • Key Components: Vicor/TDK power modules
Structural Features: Standard DS3820 module form factor, installed in the designated power slot (typically Slot 0) of the I/O rack. Front end has AC input terminals and DC output terminals. Top surface has POWER OK and FAULT LED indicators.
Application Scenarios: All applications using DS3800/DS3820 distributed I/O systems in power plants, petrochemical, metallurgy, and water treatment facilities.
Installation Requirements: Install in the leftmost or designated power slot (typically Slot 0) of the I/O rack. AC input must use an independent circuit—do not share with high-power motors. Verify polarity before connecting DC outputs.
Usage Precautions: Confirm all I/O modules are correctly installed before powering up. Input voltage must not exceed 264V AC or overvoltage protection will trip. Keep module fan (if equipped) clean to ensure adequate cooling.

You may also like