Shop

You are here:

VGA Extension Module

Technical Specifications

Interface: VGA Input/Output
Resolution Support: Up to 1920x1080 pixels at 60Hz refresh rate
Cable Length: Typically supports extension lengths up to 45 meters without signal degradation (assuming it's named after its maximum length capability)
Power Supply: Usually powered through the VGA interface; however, some models may require external power
Operating Temperature: Ranges from 0°C to +50°C
Storage Temperature: -20°C to +70°C

Robot Accessory - Mounting Bracket

Technical Specifications

Product Name: LDGRB-01
Material Composition: Likely made from durable metal (such as aluminum or steel) to ensure stability and reliability under industrial conditions
Dimensions: Specific dimensions would depend on its intended use case but are designed to fit standard ABB robot models
Weight: Varies according to material and size; optimized for minimal impact on robot performance
Compatibility: Designed specifically for use with certain ABB robot models, facilitating easy installation of additional equipment
Environmental Resistance: Resistant to common industrial factors like dust, minor impacts, and moderate temperatures

VMEbus Single-Board Computer (SBC) Technical Specifications

Form Factor: 6U VMEbus (233 mm × 160 mm)
Processor: PowerPC G4 (MPC7448) running at 1.0 GHz or higher variants
Memory:
- Up to 1 GB of DDR SDRAM (ECC support available)
- Boot flash memory for firmware and system software

Technical Specifications

Model Number: IC698CPE040-FJ
Series: Proficy PACSystems RX3i
Processor: High-speed 32-bit or 64-bit RISC processor
Memory:
- RAM: 64 MB (user memory)
- Flash Memory: 64 MB (for firmware and program storage)
Execution Speed:
- Boolean instructions: Approximately 1.5 nanoseconds per instruction
- Integer instructions: Approximately 2.5 nanoseconds per instruction

Robot Controller I/O Signal Board

Technical Specifications

Part Number: DSQC663 (3HAC029818-00110)
Function: Digital Input/Output Signal Interface Module
Voltage Level: 24 V DC
Digital Inputs: 16 channels, optically isolated, sink/source configurable
Digital Outputs: 16 channels, relay or transistor-based (depending on variant), capable of switching loads up to 2 A per channel

Technical Specifications

Input Voltage: Typically operates on standard industrial voltages, such as 115VAC or 230VAC single-phase or three-phase
Output Power: Capable of delivering power suitable for driving servo motors in the range of small to medium power requirements
Communication Interfaces: Supports various industrial Ethernet protocols like EtherCAT for real-time communication
Control Modes: Offers multiple control modes including position, velocity, and torque control
Feedback: Compatible with different types of feedback devices such as encoders for precise motor control
Dimensions: Compact design for easy integration into machine control cabinets

Category: Field Control Gate Distribution Card for Drive Systems

Technical Specifications

Manufacturer: General Electric
Series: Mark V
Function: Interface system for six-pulse phase-controlled non-reversible bridges
Signal Processing: Receives and decrypts information from the Digital Signal Processing Card (DSPC)
Feedback Signals: Handles frequency, voltage, and board status information
Communication: Uses integrated VME backplane for signal transmission
LED Indicators: Integrated IMOK LED for basic system status indication
Environmental Conditions: Designed for industrial environments with appropriate temperature and humidity ratings

Technical Specifications

Product Names: VE3008, CE3008, KJ2005X1-MQ1, 12P6381X042
Function: These parts could be involved in various functions including power conversion, control logic processing, I/O interfacing, or communication within a VFD system
Input Voltage: Designed for compatibility with standard industrial voltages, typically three-phase AC input
Output Power: Specific output power ratings would depend on the application and configuration of the drive
Communication Protocols: Supports common industrial protocols like Modbus, Ethernet/IP, Profibus, etc., facilitating integration into wider automation networks

Technical Specifications

Part Number: 3BHB005243R0106
Model Designation: KUC755AE106
Function: Control and signal interface unit for integration with ABB drives and automation systems
Voltage Rating: Designed for use in 24 V DC control circuits
Current Capacity: Supports standard PLC and relay interfacing loads, typically up to 2 A per output
Terminal Type: Screw or spring-clamp terminals for reliable wire connection
Mounting: DIN rail mountable (35 mm standard)

Technical Specifications

Part Number: 3HNA024871-001
Description: Standard chassis or subrack used in ABB control modules, often part of the AC 800M or Symphony series
Slot Capacity: Designed to accommodate multiple I/O or processor modules, typically 8 to 16 slots depending on configuration
Compatibility: Used with ABB ControlMaster, I/O modules, communication units, and power supplies in the same product family
Dimensions: Standard 19-inch rack mountable; exact dimensions approximately 482 mm (width) × 300 mm (depth) × varying height based on U-size

Category: Component for Variable Frequency Drives (VFDs) or HVAC Control Systems Technical Specifications

Input Voltage: Designed to operate with standard industrial voltages, such as 380V to 480V AC, three-phase
Output Power: Specific power rating varies depending on the exact application and configuration
Frequency Range: Typically ranges from 0 Hz to 400 Hz, optimized for controlling the speed of electric motors
Efficiency: High efficiency, often exceeding 95%, contributing to energy savings
Communication Protocols: Supports various industrial communication protocols like Modbus, BACnet, and others for integration with building management systems
Environmental Operating Conditions: Suitable for operation in temperatures ranging from -10°C to +50°C, with options for wider temperature ranges available
Dimensions and Weight: Compact design suitable for installation in confined spaces, exact dimensions depend on the specific product variant

Safety Programmable Logic Controller (PLC) Module

Technical Specifications

Series: Part of the HIMA H400 or H500 series (exact series may vary based on configuration)
CPU Architecture: High-speed, fault-tolerant processor optimized for real-time safety logic execution
Memory: Integrated program and data memory with battery-backed or non-volatile storage for safety-critical data
Input/Output (I/O) Handling: Supports connection to HIMA I/O modules via secure backplane or fieldbus communication