1. Core Technology & Performance • Measurement principle: Tunable Diode Laser Absorption Spectroscopy (TDLAS) • Target gases: O₂, CO, CO₂, NOₓ, NH₃, HCl and other IR-active species—range selectable by configuration • Accuracy: ±2 ppm or ±2 % of reading, whichever is greater • Response time (T₉₀): ≤1 second • Sensitivity: sub-ppm level dependent on gas and path length • Drift: < 1 % per month with automatic baseline correction
1. Identification & Overview IS210BPPCH1AD is a simplex analog input / output terminal board engineered by General Electric for the Mark VI Speedtronic turbine-control family. It mounts on DIN rail, uses surface-mount technology, and communicates with the VAIC processor via a single high-density cable.
1. Technical Specifications • Input voltage range: 20 – 30 VDC • Regulated output: +24 VDC ±1 %, up to 10 A continuous • Efficiency: > 85 % at full load • Isolation: 500 VDC input-to-output • Ripple & noise: < 50 mV p-p (20 MHz BW) • Hold-up time: 20 ms @ 24 V, 10 A load • Operating temperature: −30 °C to +65 °C • Storage temperature: −40 °C to +85 °C • Relative humidity: 0 – 95 % non-condensing • Vibration: 5 g rms, 10 – 2 000 Hz • Shock: 20 g, 11 ms half-sine • Dimensions: 120.7 mm H × 50.8 mm W × 251.5 mm D • Weight: 1.39 kg • Cooling: natural convection within 3500 rack airflow • Protection: over-current, over-voltage, short-circuit, thermal shutdown, automatic restart • Hot-swap capability: supported in redundant configuration • LED indicators: green “Supply OK”, red “Fault”
1. Product Overview AMAT 0100-71267 is a multifunction board manufactured by Applied Materials. It integrates an embedded wireless-Ethernet bridge and a multi-channel counter/timing engine in a single, compact package designed for semiconductor and general industrial automation systems.
Technical Specifications • Voltage Ratings: 600 VAC, 250 VDC • Current Rating: 250 A (frame only; trip unit ordered separately) • Poles: 3 • Interrupting Capacity: 65 kA @ 240 VAC / 35 kA @ 480 VAC / 25 kA @ 600 VAC • Trip Functions: LI (Long-Time & Instantaneous) via field-installable trip units • Mounting: Bolt-on or plug-on; suitable for reverse feed • Standards: UL 489, CSA, IEC 60947-2 • Dimensions: 4.13" × 10" × 4.06" (H×W×D) • Weight: ~3.5 kg (frame only)
1. Product Overview CP461-50 is a high-performance CPU processor module designed for Yokogawa CENTUM VP DCS and Stardom series installations. It replaces the earlier CP461-10 and is manufactured in Japan.
