Shop

You are here:

Home
Shop
Page 9

ABB (7491)
Others (6843)
GE (3609)
Siemens (3351)
Bently (2259)
PLC (2050)
Honeywell (1902)
Emerson (1094)
Schneider (645)
Foxboro (533)
Yokogawa (529)
A-B (372)
Moog (354)
Triconex (351)
Hima (319)
Ics Triplex (195)
Allen-Bradley (185)
Extreme Networks (170)

Bently 3500/15 106M1079-01

Product Introduction: A half-height rack-mounted power-supply module that converts 100-240 VAC mains into regulated +24 VDC rails required by every 3500 monitor. It installs in the dedicated left-hand slots of any 3500 rack and supports true dual-redundant operation with automatic load sharing.

Technical Specifications:

Input Voltage: 100-120 VAC or 200-240 VAC, 47-63 Hz
Output Voltage: +24 VDC ±1 % ( +5 V & ±12 V derived on back-plane )
Maximum Output Current: 5 A
Rated Power: 120 W continuous, 150 W peak
Hold-up Time: 20 ms at full load

Bently 330980-71-05

Product Introduction: 7 m system DIN-rail Proximitor with worldwide Ex certification for installations where 9 m is too long and 5 m is too short.

Technical Specifications:

System Length: 7.0 m
Mounting: DIN-rail or panel
Approvals: ATEX, IECEx, CSA
Supply: –24 VDC
Output: 7.87 V/mm

Bently 330980-51-00

Product Introduction: DIN-rail version of the 5 m Proximitor for high-density cabinets.

Technical Specifications:

System Length: 5.0 m
Mounting: DIN-rail (TS-35) or panel
Supply: –24 VDC
Output: 7.87 V/mm

Bently 330980-50-00

Product Introduction: 5 m system Proximitor driver that converts probe gap into precision DC voltage. Panel-mount footprint suits traditional instrument cabinets.

Technical Specifications:

System Length: 5.0 m
Mounting: Panel
Supply: –24 VDC
Output: 7.87 V/mm
Operating Temperature: 0 °C to +65 °C
Certifications: None

Bently 330930-065-01-05

Product Introduction: Agency-approved 6.5 m armored extension for worldwide hazardous areas.

Technical Specifications:

Length: 6.5 m
Armor: Stainless-steel interlocked
Approvals: ATEX, IECEx, CSA

Bently 330930-065-01-00

Product Introduction: 6.5 m armored extension for installations requiring an extra 0.5 m reach without stepping to the next standard length.

Technical Specifications:

Length: 6.5 m
Armor: Stainless-steel interlocked
Impedance: 75 Ω

Bently 330930-060-01-00

Product Introduction: 6 m armored extension for medium-length protected runs between probe and driver.

Technical Specifications:

Length: 6.0 m
Armor: Stainless-steel interlocked
Impedance: 75 Ω
Temperature: –54 °C to +200 °C
Certifications: None

Bently 330901-00-70-10-02-CN

Product Introduction: China-market probe certified to NEPSI Ex ia IIC T4 Ga for immediate acceptance in Chinese hazardous-area plants.

Technical Specifications:

Total Length: 0.7 m
Thread: 3/8-24 UNF-2A
Linear Range: 2 mm
Sensitivity: 7.87 V/mm
Approvals: NEPSI Ex

Bently 330877-080-37-00

Product Introduction: 8 m extension combining armor and FluidLoc technologies for maximum mechanical and chemical protection in a single part number.

Technical Specifications:

Length: 8.0 m
Armor: Stainless-steel interlocked
Seal: FluidLoc barrier
Impedance: 75 Ω
Temperature: –54 °C to +200 °C
Certifications: None (general-purpose)

Bently 330876-03-90-00-05

Product Introduction: Short-reach reverse-mount probe with 90° miniature coax connector for installations where axial space is limited and cabling must be routed at 90° to the probe axis.

Technical Specifications:

Mounting Style: Reverse-mount, 3/8-24 UNF-2A
Case Length: 30 mm
Total Length: 0.3 m
Connector: 90° ClickLoc miniature coax
Linear Range: 2 mm
Sensitivity: 7.87 V/mm
Approvals: ATEX, IECEx, CSA

Bently 330854-040-24-05

Product Introduction: Heavy-duty extension cable for the 3300 XL 25 mm eddy-current transducer system. It delivers 75 Ω impedance-matched signalling between probe and Proximitor while carrying global Ex certifications for hazardous-area differential-expansion (DE) measurements on large steam turbines.

Technical Specifications: