Shop

You are here:
  1. Home
  2. Shop
  3. Page 61

AEG ZAE105 Industrial Grade Power Supply Surge Protection Module

  • Product Introduction: This is a dedicated industrial grade power supply surge protection module of AEG, designed for protecting AEG Modicon PLC systems and other industrial control equipment from damage caused by power supply line surges and transients such as lightning strikes and grid fluctuations. It is installed at the power input end of the industrial control cabinet, with fast response speed and high surge absorption capacity, which can clamp the surge voltage on the power supply line to a safe range, and is an essential safety protection accessory for industrial control equipment in harsh power grid environments.
  • Technical Specifications:
    • Protection Circuit: Three-stage surge protection circuit (gas discharge tube, varistor, TVS diode), multi-level absorption of surge energy.
    • Protected Voltage: 24 VDC (for PLC system power supply), compatible with 115/230 VAC input power supply of industrial power supplies.
    • Surge Absorption Capacity: 20 kA (8/20 μs impulse current), 10 kA (10/350 μs lightning impulse current).
    • Response Time: ≤1 ns, ultra-fast response to clamp surge voltage in time.
    • Clamping Voltage: ≤36 VDC for 24 VDC side, effectively limiting the surge voltage to the safe working range of PLC equipment.
    • Insertion Loss: ≤0.1 dB at 50/60 Hz, no impact on the normal power supply of the equipment.
    • Power Supply: No additional power supply required, powered by the protected power supply line.

AEG AS-B838-032 Digital Input Module

  • Product Introduction: This is a 32-channel high-density 24 VDC digital input module of the AEG Modicon 800 series, engineered for collecting a large number of 24 VDC digital switching signals from industrial field devices such as limit switches, pushbuttons, proximity sensors and photoelectric sensors. It features a high-density channel design, which greatly saves the installation space of the PLC chassis, and converts field digital signals into logic signals recognizable by the PLC CPU, serving as a core module for large-scale digital signal acquisition in industrial automation control systems with a large number of input points.
  • Technical Specifications:
    • Input Channels: 32 independent 24 VDC digital input channels, divided into 4 common groups of 8 channels each.
    • Input Type: Sinking input (NPN type), support dry/wet contact input, compatible with most 24 VDC field switching devices.
    • Input Voltage: 18-30 VDC; Turn-on Threshold: 11-15 VDC; Turn-off Threshold: 0-5 VDC.
    • Input Current: 2 mA at 24 VDC; Response Time: ≤10 ms (on and off), support adjustable filter time (1-100 ms).

AEG AS-B885-002 Universal Signal Type

  • Product Introduction: This is an 8-channel 14-bit universal analog input module of the AEG Modicon 800 series, designed for collecting multi-channel standard and non-standard analog signals from industrial field sensors and transmitters. It supports a variety of universal voltage and current signal types, with moderate resolution and high cost performance, and converts analog signals into digital signals for transmission to the PLC CPU, serving as a cost-effective core module for multi-channel analog signal acquisition in medium-precision industrial process control systems.
  • Technical Specifications:
    • Input Channels: 8 independent analog input channels, divided into 2 common groups, support single-ended input.
    • Signal Types: Universal signal input, support 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC (hardware configurable by DIP switch per group).
    • Resolution: 14-bit; Conversion Accuracy: ±0.1% of full scale at 25°C, ±0.2% over the entire operating temperature range.
    • Conversion Time: ≤80 μs per channel, support batch sampling of channels in the same group.
    • Isolation: 2500 VAC electrical isolation between channels and backplane bus, 1500 VAC isolation between channels in the same group.

AEG S74D-VB0-F0V0 Series CANopen Dedicated Fieldbus Gateway Module

  • Product Introduction: This is a CANopen dedicated intelligent fieldbus gateway module of the AEG S74D series, optimized for the CANopen fieldbus system, realizing high-speed protocol conversion and data exchange between CANopen and Modbus RTU/TCP, Profibus-DP, Ethernet/IP and other mainstream industrial communication protocols. It is specially designed to expand the connection range of the CANopen system, connect non-CANopen standard industrial equipment to the CANopen bus, and realize the seamless integration of the CANopen bus system with other industrial control networks, serving as a core device for CANopen bus system networking and expansion.
  • Technical Specifications:
    • Main Bus Interface: CANopen V2.0A/V2.0B, support 10 kbps-1 Mbps adaptive baud rate, up to 127 nodes connected.
    • Expansion Interfaces: 2×Ethernet (10/100 Mbps RJ45, Modbus TCP/Ethernet/IP), 2×RS-485 (Modbus RTU), 1×Profibus-DP, all ports work independently.
    • Processor: 32-bit ARM Cortex-M industrial processor, operating frequency 180 MHz, with CANopen dedicated communication driver and protocol conversion algorithm.
    • Data Processing Capacity: Up to 1000 CANopen data objects (PDOs/SDOs) for simultaneous transmission, data update rate ≤3 ms.

AEG DBK021 Industrial Digital Signal Conditioner & Distributor Module

  • Product Introduction: This is a multi-channel industrial digital signal conditioner and distributor module of AEG, designed for conditioning, isolating and distributing digital switching signals in industrial control systems. It can receive a single digital input signal and distribute it to multiple output channels, while realizing electrical isolation between input and output signals and filtering out industrial field interference signals, ensuring the reliable transmission and distribution of digital signals in harsh industrial environments, and is an important accessory for digital signal distribution and anti-interference in industrial control systems.
  • Technical Specifications:
    • Input Channels: 1 digital input channel, support 24 VDC dry/wet contact input, NPN/PNP type configurable.
    • Output Channels: 8 digital output channels, 24 VDC signal output, NPN open collector output type.
    • Input Current: 5 mA at on state; Output Rated Current: 1 A per channel, 4 A per common group.
    • Isolation Performance: 2500 VAC electrical isolation between input and output, between output channels.

AEG PC-K084-785 Modicon 800 Series Handheld Programming Terminal

  • Product Introduction: This is a portable handheld programming terminal dedicated to the AEG Modicon 800 series small and medium-sized PLC systems, integrating program editing, online debugging, parameter modification and system status monitoring functions. It features a compact and portable design, a humanized operation interface and a built-in communication module, enabling on-site offline programming and online real-time debugging of the Modicon 800 series PLC without the need for a desktop computer, and is a professional on-site maintenance tool for the Modicon 800 series PLC system.
  • Technical Specifications:
    • Processor: 16-bit industrial low-power processor, dedicated to PLC program processing and communication control.
    • Display: 4-line monochrome LCD screen, 20 characters per line, with backlight for low-light environment operation.
    • Input Device: Industrial membrane keypad with 35 keys, including function keys, numeric keys and editing keys, dustproof and anti-wear.
    • Communication Interface: RS-232 (Modicon dedicated protocol), transmission rate up to 19200 bps, with dedicated PLC connection cable.
    • Memory: 512 KB Flash memory for storing PLC programs and configuration parameters, supporting up to 10 program files.

AEG AS-B885-100 Channel High-Precision Analog Input Module

  • Product Introduction: This is a 4-channel 16-bit high-precision analog input module belonging to the AEG Modicon 800 series, engineered for collecting high-accuracy analog signals from industrial field precision sensors such as pressure transmitters, temperature transducers and flow meters. It converts analog voltage/current signals into high-resolution digital signals via advanced A/D conversion chips, and transmits the data to the PLC CPU for precise process control and data analysis, serving as a core component for high-precision industrial process signal acquisition.
  • Technical Specifications:
    • Input Channels: 4 independent isolated analog input channels, support single-ended and differential input switching.
    • Signal Types: 4-20 mA DC, 0-20 mA DC, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC (software configurable per channel).
    • Resolution: 16-bit; Conversion Accuracy: ±0.05% of full scale at 25°C, ±0.1% over the entire operating temperature range.
    • Conversion Time: ≤50 μs per channel, support synchronous sampling of all channels.
    • Isolation: 3000 VAC electrical isolation between channels, between channels and backplane bus, and between channels and power supply.

AEG MBP-30 Series Industrial PLC Battery Backup Module

  • Product Introduction: This is a dedicated battery backup module for AEG Modicon series PLC systems, designed to provide uninterrupted power supply for the PLC CPU module's RAM memory and real-time clock when the main power supply is cut off. It uses a high-capacity lithium battery with long service life, ensuring that the PLC control program, process data and real-time clock in the RAM memory are not lost during power failure, and is an essential accessory for the PLC system to ensure data retention and continuous operation after power recovery.
  • Technical Specifications:
    • Battery Type: High-capacity lithium manganese dioxide battery, non-rechargeable, maintenance-free.
    • Nominal Voltage: 3.6 VDC; Rated Capacity: 2400 mAh, high capacity for long-term power supply.
    • Backup Time: ≥2000 hours for PLC RAM memory and real-time clock power supply at 25°C, meeting the long-term power failure backup requirements.
    • Operating Temperature: -25°C to +70°C; Storage Temperature: -40°C to +85°C, wide temperature range for various industrial environments.
    • Connection Interface: AEG Modicon dedicated plug-in connector, directly connected to the PLC CPU module's battery socket, plug-and-play.

AEG CGD21-TB Series Industrial Digital I/O Terminal Block Module

  • Product Introduction: This is a high-density industrial digital I/O terminal block module of AEG CGD21 series, designed for centralized wiring and signal distribution of digital I/O signals in industrial control systems. It integrates the terminal block and signal conditioning function, realizes the reliable connection between the field digital switching signal and the PLC I/O module, and has the functions of signal filtering and anti-interference, which is an important accessory for improving the wiring standardization and signal stability of the industrial control cabinet.
  • Technical Specifications:
    • I/O Channels: 16 digital input channels + 16 digital output channels, 32 channels in total, high-density configuration.
    • Input Signal Voltage: 24 VDC, dry/wet contact input compatible, input current 5 mA at on state.
    • Output Signal Voltage: 24 VDC, PNP sourcing output, rated output current 2 A per channel, 8 A per common group.
    • Signal Filtering: Built-in RC low-pass filter, filtering frequency 1 kHz, effective suppression of high-frequency interference.

AEG 6051-042 Industrial Grade Signal Isolator & Transmitter Module

  • Product Introduction: This is a high-precision industrial grade signal isolator and transmitter module of AEG 6051 series, designed for isolating, amplifying and converting analog signals in industrial control systems. It effectively isolates the analog input signal from the output signal, suppresses industrial field electromagnetic interference, and converts the input signal into a standard industrial analog signal for transmission to the upper-level controller, ensuring the accuracy and stability of analog signal transmission in harsh industrial environments.
  • Technical Specifications:
    • Input Signal Types: 4-20 mA DC current, 0-10 VDC/0-5 VDC voltage, all standard industrial analog signals.
    • Output Signal Types: 4-20 mA DC current (default), 0-10 VDC/0-5 VDC voltage, configurable by DIP switch.
    • Conversion Accuracy: ±0.1% of full scale at 25°C, ±0.2% over the entire operating temperature range.
    • Isolation Performance: 2500 VAC electrical isolation between input, output and power supply, three-way independent isolation.
    • Signal Amplification: Gain adjustable 1-10 times, support weak signal amplification, amplification accuracy ±0.1%.

AEG 120-082-007 Series High-Precision Servo Driver

  • Product Introduction: This is a high-precision digital servo driver of AEG 120 series, specially matched with AEG 120 series servo motors to form a high-performance servo control system, adopting advanced field-oriented vector control (FOC) algorithm and high-precision current and speed detection circuit. It realizes ultra-high precision position, speed and torque closed-loop control, with excellent dynamic response and low-speed stability, and is the core drive component for industrial equipment to realize ultra-high precision motion control.
  • Technical Specifications:
    • Input Voltage: 220 VAC three-phase, 50/60 Hz, voltage tolerance ±10%.
    • Rated Output Power: 2.0 kW; Rated Output Current: 8.5 A; Peak Output Current: 25.5 A (3 seconds).
    • Control Modes: High-precision position control, speed control, torque control, seamless switching between modes.
    • Positioning Accuracy: ±0.5 pulse; Speed Regulation Range: 1:20000 (0.05 rpm to 3000 rpm).
    • Speed Fluctuation: ≤±0.005% at rated speed, ultra-low speed fluctuation for high-precision speed control.
    • Feedback Interface: 2500/10000-line incremental encoder, 17-bit absolute encoder (optional), support differential signal input.

AEG MA-P884-001 Modicon 884 Series Motion Control Module

  • Product Introduction: This is a high-performance dedicated motion control module for AEG Modicon 884 series PLC systems, designed to realize high-precision multi-axis motion control of industrial equipment, integrating position control, speed control, torque control and motion trajectory planning functions. It is connected to the PLC backplane bus for real-time data exchange with the PLC CPU, and can drive a variety of servo drivers and frequency converters, which is a core functional module for the Modicon 884 series PLC system to realize the motion control of industrial automation equipment.
  • Technical Specifications:
    • Controlled Axes: 4 independent motion control axes, support single-axis, multi-axis linkage and synchronous control.
    • Control Modes: Position control (pulse/direction, CW/CCW, AB phase), speed control, torque control, all modes are configurable per axis.
    • Pulse Output: Differential pulse output, maximum pulse frequency 1 MHz per axis, pulse resolution 0.1 pulse.
    • Feedback Interface: Incremental encoder (5 VDC/24 VDC), up to 1 MHz feedback frequency, support differential signal input for anti-interference.
    • Motion Functions: Point-to-point positioning (PTP), linear interpolation, circular interpolation, electronic gear, electronic cam, multi-stage speed control.