Shop

You are here:
  1. Home
  2. Shop
  3. Page 55

GE IC693374 - CJ Digital Input Module

  • Input Channels: Usually has 16 input channels.
  • Input Voltage: For example, it may support 24V DC input voltage, but the specific value may vary depending on the actual model and configuration.
  • Response Time: The response time can be very fast, such as less than 1 millisecond, which is suitable for applications requiring quick signal acquisition.
  • Isolation Voltage: Generally has a certain isolation voltage, such as 1500V AC, to ensure the safety and stability of the signal.

GE IC698CRE020-GG Redundancy CPU Module

  • Processor Speed: 700 MHz
  • User Memory: 10 MB
  • Operating Temperature: 0℃ - 60℃ (32 - 140 degrees Fahrenheit)
  • Relative Humidity: 5 - 95% (non - condensing)
  • Number of Serial Ports: 3 (including an RS - 232 port, an RS - 485 port, and an RS - 232 Ethernet station manager port)
  • Ethernet Interface: Dual RJ - 45 ports with auto - sensing, supporting 10/100/1000BaseT Ethernet

GE IC086SLN042 - A Data Transmission Module

  • Communication Interfaces: It is likely to support 多种通信协议，such as RS - 485, CAN bus, etc., based on the similar models IC086SLN042SS.
  • Power Supply: Not explicitly mentioned, but similar modules usually have a specific power input requirement.
  • Number of Channels: It can simultaneously process multiple data channels, but the exact number is not clearly stated.

GE IC695ALG626RS - CA Analog Input Module

  • Input Channels: 16 single - ended inputs or 8 differential input channels.
  • Signal Types: Compatible with current signals such as 0 - 20mA, 4 - 20mA, ±20mA and voltage signals such as ±10V, 0 - 10V, ±5V, 0 - 5V, 1 - 5V.
  • ADC Resolution: 24 - bit ADC conversion resolution.
  • HART Communication: Each channel provides HART 5.0 communication function.
  • Operating Temperature Range: 0℃ - 60℃ (32℉ - 140℉).
  • Storage Temperature Range: - 40℃ - 85℃ (- 40℉ - 185℉).

GE IC3601A105A Power Supply Module

  • Input Voltage: Not explicitly mentioned in the available resources.
  • Output Voltage: 50V DC
  • Output Current: 0.15A
  • Output Power Rating: 7.5W (calculated as 50V x 0.15A)
  • Operating Temperature Range: -40°C to 85°C (inferred from general GE power module specifications)
  • Dimensions: Approximately 152.4mm x 152.4mm x 127mm (6.00 x 6.00 x 5.00 inches)
  • Weight: About 1.81kg (4.00 lbs)

GE IC670MDL740H Digital Output Module

  • Output Channels: 16 channels.
  • Output Voltage Range: 9.2 - 29.5V DC.
  • Output Current: 0.5A per channel, 4A in total.
  • Contact Resistance: <1Ω.
  • Switching Time: <2ms.
  • Common - Mode Rejection Ratio: >60dB.
  • Noise Immunity: >10V RMS.
  • Operating Temperature Range: - 40°C to 85°C.
  • Power Supply Voltage: 24V DC.
  • Dimensions: Approximately 120mm x 90mm x 60mm.
  • Weight: About 0.5kg.

GE IC693UDR001GP1 Universal Data Router Communication Module

  • Protocol Support:
    • Modbus RTU (Master/Slave)
    • Modbus TCP/IP (Client/Server)
    • GE SRTP (Series 90-30 Remote Transport Protocol)
    • DF1 (Full Duplex/Half Duplex)
  • Communication Ports:
    • 1 x 10/100 Mbps Ethernet port (RJ45 connector, supports Auto-MDI/MDI-X)
    • 2 x RS-232/RS-485 serial ports (terminal block connections, switch-selectable for RS-232 or RS-485 mode)
  • Data Transfer Rate:
    • Ethernet: Up to 100 Mbps (full duplex)
    • RS-232: 300 bps to 115.2 kbps
    • RS-485: 300 bps to 115.2 kbps (supports up to 32 nodes per bus)

GE IC693MDL753F

Technical Specifications
 
  • Output Type: Discrete digital output (solid-state, positive logic)
  • Number of Output Points: 32 channels, divided into 4 isolated groups (8 points per group)
  • Output Voltage Range: 10.2 VDC to 28.8 VDC
  • Output Current: 0.5 A maximum per output point; 4 A maximum per isolated group
  • Isolation: 1,500 VAC (rms) between field side and logic side; 250 VAC (rms) between adjacent output groups
  • Response Time: 0.5 ms maximum (on-time and off-time)
  • Power Consumption: 260 mA maximum from the Series 90-30 backplane (5 VDC bus); power draw includes 13 mA base current + 3 mA per active output point + 4.7 mA per active LED
  • Operating Temperature Range: -10°C to +55°C

GE IC693MDL645C

  • Input Voltage: 24 VDC, with an input voltage range of 0 - 30 VDC.
  • Number of Input Points: 16.
  • Input Current Rating: 7 mA at rated voltage.
  • Logic Type: Supports both positive and negative logic.
  • Isolation: 1500 V isolation between the field side and logic side.
  • On - State Voltage: 11.5 - 30 VDC.
  • Off - State Voltage: 0 - 5 VDC.
  • On and Off Response Time: 7 ms for both on and off.
  • Power Consumption: 80 mA from the 5 V bus on the backplane (all inputs on), 125 mA from the isolated 24 V backplane bus or user - supplied power.
  • Dimensions: Approximately 11.2 cm x 4.5 cm x 5.7 cm.
  • Weight: About 0.5 kg.

GE IC200MDL740C

  • Number of Input Channels: 8 differential analog input channels
  • Input Signal Types: Supports 4-20 mA DC (current) and 0-10 V DC (voltage) signals
  • Input Range Accuracy:
    • For 4-20 mA: ±0.1% of full scale (FS)
    • For 0-10 V DC: ±0.1% of full scale (FS)
  • Resolution: 16-bit ADC (Analog-to-Digital Converter)
  • Sampling Rate: 10 samples per second (SPS) per channel
  • Isolation: 250 V AC continuous isolation between input channels and backplane; 1500 V AC isolation for 1 minute (dielectric strength)
  • Operating Temperature Range: -20°C to 60°C
  • Storage Temperature Range: -40°C to 85°C

GE IC200MDL650D

  • Number of Output Points: 32.
  • Output Type: Relay output.
  • Rated Voltage: Typically 24VDC.
  • Operating Temperature Range: -20°C to 60°C.
  • Storage Temperature Range: -40°C to 85°C.
  • Relative Humidity: 5% to 95% (non - condensing).
  • Protection Level: IP67.
  • Size: 146.1mm x 82.5mm x 23.9mm.
  • Weight: Approximately 340g.

GE IC200MDL940G

  • Output Voltage: 0 - 125VDC (nominal values of 5V, 24V, 125VDC); 0 - 265VAC (47 - 63Hz), with nominal values of 120VAC and 240VAC.
  • Load Current per Point: 2.0A for 5 - 265VAC; 2.0A for 5 - 30VDC; 0.2A for 31 - 125VDC. The minimum load current per point is 10mA.
  • Response Time: The on - time and off - time are both 10ms.
  • Isolation: Input to logic isolation is 250VAC continuous and 1500VAC for 1 minute; group - to - group isolation is 250VAC continuous and 1500VAC for 1 minute. Each output is individually isolated.
  • Power Consumption: The maximum 5V backplane current consumption is 490mA.
  • Dimensions: 5 cm x 11 cm x 6.68 cm (excluding the height of the carrier or the mating connectors).