Shop

You are here:
  1. Home
  2. Shop
  3. Page 47

AEG 63-00155-01

Technical Specifications:

  • Memory type: Flash memory (non-volatile, retains data without power)
  • Storage capacity: 16 MB
  • Interface: Modicon PLC backplane (compatible with Premium and Quantum series)
  • Data transfer rate: 10 Mbps
  • Operating voltage: 5 V DC (supplied by PLC backplane)
  • Power consumption: 0.5 W
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 35 mm x 50 mm x 20 mm
  • Weight: 0.05 kg

AEG SIM-203

Technical Specifications:

  • Number of channels: 4 independent isolation channels
  • Input signal types: 4-20 mA DC, 0-10 V DC
  • Output signal types: 4-20 mA DC, 0-10 V DC (configurable per channel)
  • Isolation voltage: 1500 V AC between input, output, and power
  • Accuracy: ±0.1% of full scale
  • Response time: ≤1 ms
  • Power supply: 24 V DC (18 V DC - 30 V DC)

AEG 42700326

Technical Specifications:

  • Output voltage: 24 V DC (23.5 V DC - 24.5 V DC)
  • Output current: 20 A continuous
  • Input voltage: 110 V AC - 240 V AC (50/60 Hz)
  • Efficiency: 92% at full load
  • Ripple voltage: <50 mV
  • Overload protection: 120% of rated current (shuts down after 10 seconds)
  • Short-circuit protection: Instantaneous current limiting

AEG TSX3721100

Technical Specifications:

  • Processor: 32-bit RISC, 100 MHz clock speed
  • Instruction execution speed: 0.05 μs per basic instruction
  • User program memory: 32 KB EEPROM (expandable to 64 KB)
  • Data memory: 8 KB RAM
  • Maximum I/O capacity: 4096 digital I/O points or 512 analog I/O points
  • Communication ports: 1 x RS-232, 1 x Ethernet (TCP/IP), 1 x Profibus DP master/slave
  • Programming languages: LD, FBD, IL, ST, SFC

AEG AM-S975-103

Technical Specifications:

  • Output channels: 8 isolated channels
  • Output signal types: Configurable per channel for 4-20 mA DC, 0-10 V DC
  • Resolution: 16 bits
  • Accuracy: ±0.1% of full scale
  • Output load: 500 Ω for current output, 10 kΩ for voltage output
  • Isolation voltage: 1000 V AC between channels and backplane
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)

AEG 387502-6054

Technical Specifications:

  • Input channels: 16 channels, 24 V DC (sink/source configurable), 5 mA per channel
  • Output channels: 16 channels, solid-state MOSFET, 24 V DC, 0.5 A per channel (4 A per group)
  • Input response time: ≤1 ms
  • Output switching speed: ≤1 ms
  • Isolation voltage: 500 V AC between channels and backplane
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)
  • Power consumption: 3 W

AEG 140CFA04000

Technical Specifications:

  • Number of input channels: 4 isolated channels
  • Input signal types: Configurable per channel for 4-20 mA DC, 0-10 V DC, -10 V to +10 V DC, thermocouples (J, K, T, E), RTDs (PT100)
  • Resolution: 16 bits
  • Accuracy: ±0.05% of full scale
  • Sampling rate: 5 ms per channel
  • Isolation voltage: 1000 V AC between channels and backplane
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)

AEG 227975V

Technical Specifications:

  • Rated current range: 45 A - 63 A
  • Trip class: Class 10 (trips within 10 seconds at 6 x rated current)
  • Phase loss protection: Instantaneous trip within 2 seconds of phase failure
  • Reset type: Manual and automatic reset options
  • Number of poles: 3 poles
  • Auxiliary contacts: 1 NO + 1 NC
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 60 mm x 120 mm x 80 mm
  • Weight: 0.5 kg

AEG 6728-042.270397

  • Technical Specifications:
    • Supported protocols: Modbus RTU, Modbus TCP, Profibus DP, Ethernet/IP, DeviceNet
    • Communication interfaces: 2 x RS-485 ports, 2 x Ethernet (RJ45, 10/100 Mbps)
    • Data transfer rate: Up to 100 Mbps on Ethernet; 115.2 kbps on RS-485
    • Number of connected nodes: 32 per RS-485 port; 256 on Ethernet
    • Input voltage: 24 V DC (18 V DC - 30 V DC)
    • Power consumption: 5 W
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 50 mm x 100 mm x 120 mm
    • Weight: 0.3 kg

AEG AS-H819-100

Technical Specifications:

  • Number of input channels: 8 isolated channels
  • Supported sensor types: Thermocouples (J, K, T, E, R, S, B, N), RTDs (PT100, PT1000)
  • Measurement range: -200°C to +1800°C (depending on the sensor type)
  • Resolution: 0.1°C
  • Accuracy: ±0.2°C for RTDs, ±0.5°C for thermocouples
  • Sampling rate: 100 ms per channel
  • Isolation voltage: 1000 V AC between channels and backplane

AEG AS-H827-100

Technical Specifications:

  • Number of counting channels: 4 independent channels
  • Counting type: Up counting, down counting, up/down counting (configurable)
  • Maximum counting frequency: 1 MHz per channel
  • Counting range: 0-4294967295 (32 - bit unsigned integer)
  • Input signal type: 24 V DC (sink/source configurable)
  • Response time: ≤0.1 μs
  • Isolation voltage: 500 V AC between channels and between channels and ground
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)

AEG AS-M380-006

Technical Specifications:

  • Number of output channels: 6 isolated channels
  • Output signal types: Configurable per channel for 4-20 mA DC, 0-10 V DC
  • Resolution: 16 bits
  • Accuracy: ±0.1% of full scale
  • Output load: 500 Ω for current output, 10 kΩ for voltage output