Shop

You are here:
  1. Home
  2. Shop
  3. Page 46

AEG AM-S985-800

Technical Specifications:

  • Communication protocol: Modbus Plus
  • Communication port: 2 x Modbus Plus ports (for daisy - chain or redundant network configuration)
  • Transmission rate: 1 Mbps
  • Maximum number of nodes on the network: 64
  • Transmission distance: Up to 1000 m per segment (using twisted - pair cable)
  • Operating voltage: 24 V DC (supplied by the PLC system)
  • Power consumption: 3 W

AEG BKF101

Technical Specifications:

  • Rated voltage: 400 V AC
  • Rated current: 10 A
  • Breaking capacity: 6 kA at 400 V AC
  • Number of poles: 3 poles
  • Trip curve: C curve (trips at 5 - 10 x rated current)
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 27 mm x 89 mm x 69 mm
  • Weight: 0.15 kg

AEG 6065-042.703580

  • Technical Specifications:
    • Memory type: Flash memory
    • Memory capacity: 16 MB
    • Data retention: 10 years without power
    • Operating voltage: 3.3 V DC (supplied by the PLC system)
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 20 mm x 50 mm x 80 mm
    • Weight: 0.1 kg

AEG PC-A984-120

Technical Specifications:

  • Processor type: 16 - bit microprocessor
  • Instruction execution speed: 1.5 ms per 1000 instructions
  • User program memory: 1.5 KB EEPROM (expandable up to 8 KB)
  • Data memory: 1 KB RAM
  • Number of I/O points: Up to 512 digital I/O points (expandable via I/O racks)
  • Communication ports: 1 x RS - 232 (for programming)
  • Programming language: Ladder Diagram (LD), Instruction List (IL)

AEG 7628-042.21978 1.07

Technical Specifications:

  • Processor type: 32 - bit RISC processor
  • User program memory: 16 KB Flash memory
  • Data memory: 8 KB RAM
  • Number of I/O points: 16 digital inputs, 16 digital outputs (relay), 4 analog inputs, 2 analog outputs
  • Communication ports: 1 x RS - 232, 1 x RS - 485 (Modbus RTU)
  • Programming language: Ladder Diagram (LD), Function Block Diagram (FBD)
  • Operating voltage: 24 V DC (18 V DC - 30 V DC)

AEG 110-282 S908

  • Technical Specifications:
    • Communication protocol: Modbus RTU, Modbus ASCII
    • Communication port: 1 x RS - 485 (for connecting to remote I/O modules)
    • Maximum number of remote I/O modules: 32
    • Maximum I/O points: 512 digital I/O points or 64 analog I/O points
    • Transmission distance: Up to 1000 m (using twisted - pair cable)
    • Operating voltage: 24 V DC (18 V DC - 30 V DC)
    • Power consumption: 8 W
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
    • Weight: 0.3 kg

AEG 110-CPU-612-00

Technical Specifications:

  • Processor type: 16 - bit microprocessor
  • Instruction execution speed: 0.1 μs per basic instruction
  • User program memory: 8 KB EEPROM (expandable up to 32 KB)
  • Data memory: 4 KB RAM
  • Number of I/O points: Up to 256 digital I/O points (expandable via I/O modules)
  • Communication ports: 1 x RS - 232 (for programming and HMI communication), 1 x Modbus RTU (for network communication)
  • Programming language: Ladder Diagram (LD), Function Block Diagram (FBD), Instruction List (IL)network communication)

AEG AS-B565-000

Technical Specifications:

  • Number of input channels: 16 channels (isolated)
  • Input signal type: 24 V AC
  • Input voltage range: 18 V AC - 30 V AC
  • Input current: 20 mA per channel
  • Response time: ≤5 ms
  • Isolation voltage: 500 V AC between channels and between channels and ground
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
  • Weight: 0.2 kg

AEG AS-B883-001

  • Technical Specifications:
    • Number of counting channels: 4 channels (isolated)
    • Counting type: Up / down counting, single - phase, two - phase (A/B phase)
    • Maximum counting frequency: 500 kHz per channel
    • Counting range: 0 - 4294967295 (32 - bit unsigned integer)
    • Input signal type: 24 V DC (sink / source configurable)
    • Input current: 10 mA per channel
    • Response time: ≤0.1 μs
    • Isolation voltage: 500 V AC between channels and between channels and ground
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
    • Weight: 0.25 kg

AEG COM-DPM-K

Technical Specifications:

  • Operating voltage: 24 V DC (18 V DC - 30 V DC)
  • Power consumption: 8 W
  • Data processing speed: 1000 data points per second
  • Communication interfaces: 1 x RS - 232, 1 x RS - 485 (Modbus RTU), 1 x Ethernet (TCP/IP)
  • Data storage capacity: 32 MB flash memory for data logging
  • Operating temperature range: -25°C to +70°C
  • Degree of protection: IP20
  • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
  • Weight: 0.25 kg

AEG AS-B864-001

  • Technical Specifications:
    • Number of output channels: 4 channels (isolated)
    • Output signal type: 4 mA - 20 mA DC, 0 V - 10 V DC (configurable per channel)
    • Output resolution: 12 bits
    • Accuracy: ±0.1% of full scale
    • Output current range: 0 mA - 20 mA DC
    • Output voltage range: 0 V DC - 10 V DC
    • Response time: ≤10 ms
    • Isolation voltage: 1000 V AC between channels and between channels and ground
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
    • Weight: 0.25 kg

AEG AS-S985-802

  • Technical Specifications:
    • Number of input channels: 8 channels (isolated)
    • Input signal type: 4 mA - 20 mA DC, 0 V - 10 V DC (configurable per channel)
    • Input resolution: 12 bits
    • Accuracy: ±0.1% of full scale
    • Response time: ≤10 ms
    • Isolation voltage: 1000 V AC between channels and between channels and ground
    • Operating temperature range: -25°C to +70°C
    • Degree of protection: IP20
    • Dimensions (W x H x D): 35 mm x 100 mm x 120 mm
    • Weight: 0.25 kg