Shop

You are here:
  1. Home
  2. Shop
  3. Page 4

GE IS220PSVOH1A Servo I/O Module

echnical Specifications

  1. Electrical Parameters:
    • Input/Output Voltage: 24 V DC .
    • Input/Output Current: 2.5 A .
    • Power Consumption: ~25 W .
  2. Environmental Ratings:
    • Operating Temperature: -40°C to +70°C .
    • Storage Temperature: -40°C to +85°C .
    • Humidity Tolerance: 5%–95% RH (non-condensing) .
    • Protection Rating: IP20 (standard) .

NI PXI-7340

Technical Specifications

  1. Control Axes:
    • Supports 1–4 axes of simultaneous coordinated motion control .
    • Configurable for servo or stepper motors per axis .
  2. Control Modes:
    • Position, velocity, and force/pressure control .
    • Closed-loop (with feedback) or open-loop (stepper-only) operation .

MOOG D136-002-005 Multi-Axis Motion Controller

Technical Specifications

  1. Control Axes: Supports 1-8 axes (configurable based on application requirements) .
  2. Control Types:
    • Position control
    • Velocity control
    • Force/pressure control .
  3. Feedback Interfaces:
    • Incremental encoders
    • Absolute encoders
    • Analog sensors (e.g., displacement, pressure sensors) .

EATON XV-440-10TVB-1-50 Industrial HMI-PLC Touch Panel

技术规格

  • 感应距离：根据型号不同，感应距离可能有所不同；例如，对于反射式型号，感应距离可达 50 米
  • 电源电压：通常为 10-30V DC
  • 输出类型：NO（常开）或 NC（常闭）、PNP 或 NPN 类型
  • 响应时间：响应时间快，通常小于 1ms
  • 外壳材料：坚固的材料，例如塑料或金属，旨在承受恶劣环境
  • 环境保护：IP67 防尘等级，可防止短暂浸水
  • 工作温度：通常范围为-25°C至+55°C
  • 接线：选项可能包括预接线电缆或快速断开 M12 连接器

YOKOGAWA CP451-51 Multifunction Processor Module

Controller / Interface Module

Technical Specifications
  • Form Factor: Designed for rack mounting in control cabinets
  • Communication Interfaces: Supports multiple protocols including Ethernet, Modbus, and proprietary Yokogawa communication protocols
  • Input Voltage: Operates on standard industrial power supplies, typically 100-240V AC or 24V DC
  • Digital Inputs/Outputs: Configurable for connecting sensors, switches, and other digital devices
  • Analog Inputs/Outputs: Provides high-resolution inputs and outputs for precise measurement and control
  • Processor: High-speed processor capable of handling complex control algorithms

KEBA FB201 — Comprehensive Data Sheet

Interface Module / Control System

Technical Specifications
  • Form Factor: Compact design suitable for integration into existing systems
  • Communication Protocols: Supports multiple industry-standard protocols including Ethernet/IP, PROFINET, EtherCAT, and others
  • Input Voltage: Typically operates within standard industrial power supply ranges (e.g., 24V DC)
  • Digital Inputs/Outputs: Configurable I/O points for connecting sensors, actuators, and other peripheral devices
  • Analog Inputs/Outputs: Available options for precise control and feedback mechanisms
  • Environmental Conditions: Designed to operate reliably under industrial conditions, including temperature ranges from 0°C to +55°C and relative humidity up to 95% non-condensing
  • Safety Standards: Compliant with relevant safety and EMC standards for industrial environments

UNIOP ETT-VGA-0045 Industrial HMI Touch Panel

VGA Extension Module

Technical Specifications
  • Interface: VGA Input/Output
  • Resolution Support: Up to 1920x1080 pixels at 60Hz refresh rate
  • Cable Length: Typically supports extension lengths up to 45 meters without signal degradation (assuming it's named after its maximum length capability)
  • Power Supply: Usually powered through the VGA interface; however, some models may require external power
  • Operating Temperature: Ranges from 0°C to +50°C
  • Storage Temperature: -20°C to +70°C

ABB LDGRB-01 3BSE013177R1 Industrial Signal-Conditioning & Remote I/O Module

Robot Accessory - Mounting Bracket

Technical Specifications
  • Product Name: LDGRB-01
  • Material Composition: Likely made from durable metal (such as aluminum or steel) to ensure stability and reliability under industrial conditions
  • Dimensions: Specific dimensions would depend on its intended use case but are designed to fit standard ABB robot models
  • Weight: Varies according to material and size; optimized for minimal impact on robot performance
  • Compatibility: Designed specifically for use with certain ABB robot models, facilitating easy installation of additional equipment
  • Environmental Resistance: Resistant to common industrial factors like dust, minor impacts, and moderate temperatures

GE VME7740-841 High-Performance VMEbus Single-Board Computer

VMEbus Single-Board Computer (SBC) Technical Specifications

  • Form Factor: 6U VMEbus (233 mm × 160 mm)
  • Processor: PowerPC G4 (MPC7448) running at 1.0 GHz or higher variants
  • Memory:
    • Up to 1 GB of DDR SDRAM (ECC support available)
    • Boot flash memory for firmware and system software

GE IC698CPE040-FJ Central Processing Unit Designed for RX7i PACSystems

Technical Specifications

  • Model Number: IC698CPE040-FJ
  • Series: Proficy PACSystems RX3i
  • Processor: High-speed 32-bit or 64-bit RISC processor
  • Memory:
    • RAM: 64 MB (user memory)
    • Flash Memory: 64 MB (for firmware and program storage)
  • Execution Speed:
    • Boolean instructions: Approximately 1.5 nanoseconds per instruction
    • Integer instructions: Approximately 2.5 nanoseconds per instruction

ABB DSQC663 3HAC029818-001/10 Main Drive Unit for IRC5 Robot Controllers

Robot Controller I/O Signal Board

Technical Specifications
  • Part Number: DSQC663 (3HAC029818-00110)
  • Function: Digital Input/Output Signal Interface Module
  • Voltage Level: 24 V DC
  • Digital Inputs: 16 channels, optically isolated, sink/source configurable
  • Digital Outputs: 16 channels, relay or transistor-based (depending on variant), capable of switching loads up to 2 A per channel

ELAU PMC-2/11/08/000/01/03/00/00/00 Compact Servo Drive & Positioning Controller

Technical Specifications

  • Input Voltage: Typically operates on standard industrial voltages, such as 115VAC or 230VAC single-phase or three-phase
  • Output Power: Capable of delivering power suitable for driving servo motors in the range of small to medium power requirements
  • Communication Interfaces: Supports various industrial Ethernet protocols like EtherCAT for real-time communication
  • Control Modes: Offers multiple control modes including position, velocity, and torque control
  • Feedback: Compatible with different types of feedback devices such as encoders for precise motor control
  • Dimensions: Compact design for easy integration into machine control cabinets