Shop

You are here:
  1. Home
  2. Shop
  3. Page 33

Alstom Micom P40 AGILE MICOM P141

Application Scenarios

1. Power Distribution Networks
  • MV Feeder Protection: Overcurrent/earth fault protection for 6.6–33kV substations .
  • Fault Location: Pinpoints cable/line faults via impedance-based algorithms .
2. Industrial Facilities
  • Motor/Generator Backup: Protects critical drives in plants using directional overcurrent .
  • Microgrid Control: Manages grid-tie transitions and load balancing .
3. Renewable Integration
  • Solar/Wind Farm Collection Grids: Synchronizes distributed resources with autoreclosing .
4. Transportation & Infrastructure
  • Rail Electrification: Protects catenary systems with distance protection .

ABB 1MRK002311-AAR02

Application Scenarios

1. Power Distribution Networks
  • Synchronizes protection relays (e.g., ABB REx670) in electrical substations, enabling microsecond-level fault response .
2. Industrial Automation
  • Connects ABB AC800M controllers with legacy VME-based systems in automotive assembly lines and chemical plants .
3. Critical Infrastructure
  • Deployed in defense systems, offshore platforms, and aerospace controls where EMI immunity is non-negotiable .
4. Remote I/O Management
  • Extends SCADA/PLC reach to isolated equipment (e.g., pipeline monitoring sensors) across 20 km distances .

NOUENVOG AAP3798102-00131

Application Scenarios

  1. Compressor Control Systems
    • Cameron TA-Series: Manages inlet valve positioning, oil pressure, and vibration monitoring in TA2000/TA3000 compressors .
  2. Energy Infrastructure
    • Pump Stations: Regulates flow/pressure in pipeline transport .
    • Gas Turbine Backup: Synchronizes auxiliary systems during grid failures .
  3. Industrial Automation
    • Production Lines: Interfaces with Schneider/Bently Nevada PLCs for safety interlocks .
    • Remote Monitoring: Transmits operational data to SCADA via Modbus .

Woodward EASYGEN-3200 8440-2052H Controller

Electrical Parameters

  • Input Voltage: 12/24 VDC (8–40 VDC range)
  • Power Consumption: 17–19 W
  • Current Rating: 5A CT inputs
I/O Capabilities
  • Discrete I/O: 32 configurable inputs + 32 outputs (expandable to 42 outputs via I/O boards)
  • Analog I/O: 3 configurable inputs + 16 external inputs (via CANopen)
  • Breaker Control: Slip-frequency synchronization, open/close control
Environmental Ratings
  • Operating Temp: -20°C to +70°C (alternative: -40°C to +85°C)
  • Protection Class: IP20
  • Humidity: 10–90% non-condensing

KOLLMORGEN S30301-NA Servo Drive

Technical Specifications

Electrical Parameters
  • Input Voltage: 3-phase 208–480V AC, 50/60 Hz
  • Power Rating: 2.5 kVA
  • Output Current: 3A
Control Modes Torque, Velocity, Position, Electronic Gearing, Pulse Following Feedback Compatibility Resolvers (2V peak-to-peak sine/cosine) and Encoders (5V differential, up to 3MHz)

HONEYWELL 05701-A-0351 Control Card

Technical Specifications

  1. Electrical Parameters:
    • Power Supply: 24V DC (±10%) .
    • Power Consumption: <5 W .
    • Analog Input: 1 channel (0–10 V or 4–20 mA) .
    • Analog Output: 1 channel (0–10 V or 4–20 mA) .
    • Digital Input: 2 channels  (or up to 32 channels in expansion mode ).
    • Digital Output: 2 channels  (or up to 32 channels in expansion mode ).

ABB CMA121 DC Power Supply Module

Technical Specifications

  • Measurement Range: Offers a wide range of measurement options tailored to specific application needs, typically from 0-400 mbar to 0-40 bar
  • Accuracy: High accuracy, often within ±0.075% of span, ensuring reliable readings
  • Output Signal: Provides standard output signals such as 4-20mA or digital outputs like HART, Foundation Fieldbus for easy integration with control systems
  • Operating Voltage: Operates on typical industrial power supplies, commonly 12 to 36 V DC
  • Power Consumption: Designed for low power consumption, optimizing energy efficiency
  • Operating Temperature: Suitable for operation in a broad temperature range, usually from -40°C to +85°C
  • Environmental Protection: Rated IP66 or IP67, providing protection against dust and water ingress
  • Process Connections: Available with various process connections to suit different installation requirements
  • Certifications: Meets international standards for safety and performance, including ATEX, IECEx, and others applicable to hazardous locations

TRICONEX 8310 High-Density Power Module

Functional Features

  1. Triple Modular Redundancy (TMR)
    • Three independent sub-circuits with hardware/software voting ensure uninterrupted power during faults .
    • Automatic switch to backup power if primary fails, critical for SIL 3 applications .
  2. Hot-Swap & Modular Design
    • Modules replaceable online without system shutdown .
    • DIN-rail or panel mounting for flexible integration .
  3. Diagnostics & Safety
    • LED indicators for real-time fault detection (e.g., blown fuse, overload) .
    • Conformal PCB coating resists dust, moisture, and chemical corrosion .
  4. Wide Compatibility
    • Supports Triconex Main Chassis (8110), Expansion Chassis (8111/8121), and RXM Chassis (8112) .
    • Interfaces with I/O modules up to 12 km away via fiber-optic extenders .

ABB IMCAM07B0000 Intelligent Servo Drive Controller

Technical Specifications

  • Interface: Supports multiple industrial protocols such as Profibus DP, CANopen, DeviceNet, and others depending on configuration
  • Network Connectivity: Equipped with connectors suitable for different network types including RJ45, M12, and terminal blocks
  • Data Transfer Rate: Varies by protocol, typically supports speeds up to 12 Mbps for high-speed data transmission
  • Operating Voltage: Operates on standard industrial power supplies, commonly 24V DC
  • Power Consumption: Designed for low power consumption, typically less than 5W
  • Operating Temperature: Suitable for operation in a wide range of temperatures, usually from -25°C to +70°C
  • Humidity Range: Can operate effectively in environments with humidity levels from 5% to 95%, non-condensing
  • Dimensions: Compact design suitable for installation in confined spaces within control cabinets
  • Certifications: Complies with international standards for safety and electromagnetic compatibility (EMC)

GE IS210AEBIH3B AE Bridge Interface Board

Technical Specifications

  • Interface Type: Dual Ethernet ports supporting 10/100/1000 Mbps speeds
  • Communication Protocols: Supports standard industrial protocols including Ethernet/IP, Modbus TCP, and GE's proprietary Speedtronic communication protocols
  • Network Redundancy: Features such as Rapid Spanning Tree Protocol (RSTP) or link redundancy to ensure network reliability and continuous operation
  • Data Throughput: High bandwidth capacity to support real-time data exchange between controllers, HMIs, and diagnostic systems
  • Operating Voltage: Typically powered by the backplane within the Mark VIe chassis, with nominal voltage around 3.3V and 5V DC

ProSoft PLX32-EIP-PND EtherNet/IP to PROFINET Gateway

Technical Specifications

  • Supported Protocols: EtherNet/IP and various other protocols (specifics depend on configuration)
  • Network Interfaces:
    • Multiple Ethernet ports supporting 10/100 Mbps speeds for connection to EtherNet/IP networks
    • Additional serial or Ethernet ports for connecting to other network types
  • Data Transfer Rate: Supports up to 10/100 Mbps Ethernet speeds
  • Operating Voltage: Typically operates on 24V DC power supply
  • Power Consumption: Low power consumption suitable for energy-efficient operations
  • Operating Temperature: Designed for use in industrial environments, usually from -25°C to +70°C
  • Humidity Range: Operates effectively in relative humidity levels from 5% to 95%, non-condensing
  • Dimensions: Compact design suitable for installation in control cabinets
  • Certifications: Complies with relevant industry standards such as CE, UL, and others applicable to industrial networking equipment

GE 239-RTD-AN Motor Protection Relay with RTD Inputs

Technical Specifications

  • Sensor Type: Compatible with various RTD types, commonly Pt100 and Pt1000
  • Input Channels: Multiple channels for connecting several RTD sensors simultaneously
  • Measurement Range: Wide range to accommodate different temperature measurement needs, typically from -200°C to +850°C depending on the RTD type
  • Accuracy: High accuracy, often within ±0.1°C or better, ensuring reliable temperature readings
  • Resolution: High resolution for precise measurements, usually up to 16-bit or higher
  • Supply Voltage: Operates on standard industrial power supplies, typically 24V DC