Shop

You are here:
  1. Home
  2. Shop
  3. Page 2771

GE IC697CPM790

Technical Specifications Manufacturer: GE Fanuc Model: IC697CPM790 CPU Type: 64 MHz, 80486DX2 microprocessor Memory: 1 MB of battery-backed CMOS RAM Up to 512 KB for user applications and data I/O Capacity: Up to 12K discrete inputs and outputs (simplex mode only) 2048 voting discrete inputs 2048 voting discrete outputs Up to 8K analog inputs and outputs (simplex mode)

GE IC697CMM711

Technical Specifications Model: IC697CMM711 Type: Serial Communication Coprocessor Compatibility: Designed for use with GEFanuc automation solutions, particularly enhancing the serial communication capabilities of programmable logic controllers (PLCs). Supported Protocols: Handles multiple serial communication protocols such as RS-232, RS-422, RS-485, MODBUS, PPI, and PROFIBUS. Communication Channels: Typically supports multiple serial communication channels, allowing simultaneous communication with multiple external devices.

GE IC697BEM731

Technical Specifications Model: IC697BEM731 Series: Part of the GE Fanuc 90-70 Series Programmable Logic Controllers (PLC) Type: Genius Bus Controller Module Connectivity: Up to 30 devices can be connected Uses a token-passing scheme for data transmission among configured devices on the same bus

GE IC697BEM713

Technical Specifications Model: IC697BEM713 Manufacturer: General Electric (GE) Type: Programmable Logic Controller (PLC) Communication Module Series: Part of the Genius I/O Series Communication Protocol: Supports Genius I/O network communication protocol Processor: High-performance processor with arithmetic coprocessor

GE IC697ALG230

Technical Specifications Model: IC697ALG230 Channels: 8 analog input channels Input Types: Voltage, current, and thermal resistance signals Memory Allocation in GEPAC: Occupies 16 memory addresses (e.g., AI1---AI16), with each channel potentially allocated two addresses depending on data type

GE IC695PSD040F

Application Scenarios

  • Industrial Automation Systems: The IC695PSD040F is primarily used in industrial automation control systems, providing power to various modules and components within the system.
  • RX3i PACSystems: As part of the RX3i series, it is designed for seamless integration and compatibility with GE Fanuc's RX3i PACSystems.
  • Automation and Control Equipment: Suitable for powering PLCs, sensors, actuators, and other automation and control devices that require a stable DC power supply.

GE IC695PSD040F

Technical Specifications Model: IC695PSD040F Series: Part of the GE Fanuc RX3i Series Output Voltage: Standard Output: 5.1V DC Additional Output (typically used): 3.3V DC Nominal Input Voltage: 24V DC

GE IC695CRU320

GE IC695CRU320 is a redundant processor belonging to the PACSystems RX3i product line, manufactured by GE Fanuc/Emerson Automation.

GE IC695CRU320

GE IC695CRU320 is a redundant processor belonging to the PACSystems RX3i product line, manufactured by GE Fanuc/Emerson Automation.

GE IC695CPE310

Technical Specifications Model: IC695CPE310 Series: RX3i Series Processor: 1.1 GHz Atom Processor Memory: 10 MB Communication Interfaces: Embedded Ethernet (supports 10 Mb/s and 100 Mb/s connections) RS-485 Serial Port RS-232 Serial Port

GE IC695CHS012

Technical Specifications Model: IC695CHS012 Type: PACSystem RX3i Universal Backplane Supported Interfaces: PCI (Peripheral Component Interconnect) High-speed serial connections Slot Count: 12 slots Physical Dimensions: 18.01 x 5.57 x 5.80 inches (457.5 x 141.5 x 147.32 mm) (Height x Width x Depth)

GE IC694MDL940

Technical Specifications Model: IC694MDL940 Manufacturer: Formerly manufactured by GE Intelligent Platforms (now part of Emerson Automation Solutions) Series: RX3i PACSystems Output Points: 16 Relay Outputs Output Type: Normally Open (NO) Contacts Maximum Load per Output: 2 Amps Pilot Duty Maximum Load per Group (4 Outputs): 4 Amps Minimum Load: 10 mA