GE IC695PSD040F
Technical Specifications Model: IC695PSD040F Series: Part of the GE Fanuc RX3i Series Output Voltage: Standard Output: 5.1V DC Additional Output (typically used): 3.3V DC Nominal Input Voltage: 24V DC
Shop
You are here:
GE IC695CRU320
GE IC695CRU320 is a redundant processor belonging to the PACSystems RX3i product line, manufactured by GE Fanuc/Emerson Automation.
GE IC695CRU320
GE IC695CRU320 is a redundant processor belonging to the PACSystems RX3i product line, manufactured by GE Fanuc/Emerson Automation.
GE IC695CPE310
Technical Specifications Model: IC695CPE310 Series: RX3i Series Processor: 1.1 GHz Atom Processor Memory: 10 MB Communication Interfaces: Embedded Ethernet (supports 10 Mb/s and 100 Mb/s connections) RS-485 Serial Port RS-232 Serial Port
GE IC695CHS012
Technical Specifications Model: IC695CHS012 Type: PACSystem RX3i Universal Backplane Supported Interfaces: PCI (Peripheral Component Interconnect) High-speed serial connections Slot Count: 12 slots Physical Dimensions: 18.01 x 5.57 x 5.80 inches (457.5 x 141.5 x 147.32 mm) (Height x Width x Depth)
GE IC694MDL940
Technical Specifications Model: IC694MDL940 Manufacturer: Formerly manufactured by GE Intelligent Platforms (now part of Emerson Automation Solutions) Series: RX3i PACSystems Output Points: 16 Relay Outputs Output Type: Normally Open (NO) Contacts Maximum Load per Output: 2 Amps Pilot Duty Maximum Load per Group (4 Outputs): 4 Amps Minimum Load: 10 mA
GE IC694MDL655
Technical Specifications Model: IC694MDL655 Type: Digital Input Module Number of Channels: 32 Channels Input Voltage: +24V DC (typical) Input Signal: Digital, Accepts +24V DC signals Current Consumption per Channel: Low (specific values may vary) Operating Temperature: Standard industrial temperature range
GE IC694ALG392
Manufacturer: General Electric (GE) Series: PACSystems RX3i Type: Analog Output Module Technical Specifications Channels: 8 Analog Output Channels Output Types Supported: Voltage (0 V to +10 V, -10 V to +10 V) and Current (4-20 mA, 0-20 mA)
GE IC693PWR330
Technical Specifications: Output Power: 5 VDC: Maximum 30 Watts 24 VDC Relay: Maximum 5 Watts Isolated 24 VDC: Maximum 20 Watts Total Maximum: 30 Watts (across all three outputs)
GE IC693MDL753
Technical Specifications Model: IC693MDL753 Series: 90-30 Series Programmable Logic Controller (PLC) Type: Digital Output Module Number of Outputs: 32 (divided into 4 groups of 8)
GE IC693MDL740
Technical Specifications Model: IC693MDL740 Series: 90-30 Series Type: Digital Input/Output Module (Primarily Output Module) Output Type: Positive Logic DC Output Number of Outputs: 16 (divided into 2 groups of 8)
GE IC693CPU374
Technical Specifications Manufacturer: General Electric (GE) Series: GE Fanuc Series 90-30 Product Type: Single-slot CPU Module with Embedded Ethernet Interface Processor Type: Embedded 586 Processor Speed: 133 MHz