Technical Specifications Model: IC695CPE310 Series: RX3i Series Processor: 1.1 GHz Atom Processor Memory: 10 MB Communication Interfaces: Embedded Ethernet (supports 10 Mb/s and 100 Mb/s connections) RS-485 Serial Port RS-232 Serial Port
Technical Specifications Model: IC695CHS012 Type: PACSystem RX3i Universal Backplane Supported Interfaces: PCI (Peripheral Component Interconnect) High-speed serial connections Slot Count: 12 slots Physical Dimensions: 18.01 x 5.57 x 5.80 inches (457.5 x 141.5 x 147.32 mm) (Height x Width x Depth)
Technical Specifications Model: IC694MDL940 Manufacturer: Formerly manufactured by GE Intelligent Platforms (now part of Emerson Automation Solutions) Series: RX3i PACSystems Output Points: 16 Relay Outputs Output Type: Normally Open (NO) Contacts Maximum Load per Output: 2 Amps Pilot Duty Maximum Load per Group (4 Outputs): 4 Amps Minimum Load: 10 mA
Technical Specifications Model: IC694MDL655 Type: Digital Input Module Number of Channels: 32 Channels Input Voltage: +24V DC (typical) Input Signal: Digital, Accepts +24V DC signals Current Consumption per Channel: Low (specific values may vary) Operating Temperature: Standard industrial temperature range
Manufacturer: General Electric (GE) Series: PACSystems RX3i Type: Analog Output Module Technical Specifications Channels: 8 Analog Output Channels Output Types Supported: Voltage (0 V to +10 V, -10 V to +10 V) and Current (4-20 mA, 0-20 mA)
Technical Specifications: Output Power: 5 VDC: Maximum 30 Watts 24 VDC Relay: Maximum 5 Watts Isolated 24 VDC: Maximum 20 Watts Total Maximum: 30 Watts (across all three outputs)
Technical Specifications Model: IC693MDL753 Series: 90-30 Series Programmable Logic Controller (PLC) Type: Digital Output Module Number of Outputs: 32 (divided into 4 groups of 8)
Technical Specifications Model: IC693MDL740 Series: 90-30 Series Type: Digital Input/Output Module (Primarily Output Module) Output Type: Positive Logic DC Output Number of Outputs: 16 (divided into 2 groups of 8)
Technical Specifications Manufacturer: General Electric (GE) Series: GE Fanuc Series 90-30 Product Type: Single-slot CPU Module with Embedded Ethernet Interface Processor Type: Embedded 586 Processor Speed: 133 MHz
Technical Specifications Model: IC693CHS398 Manufacturer: GE Fanuc (now often referred to as GE Automation & Controls) Series: 90-30 Series Dimensions: 10.43 x 5.12 x 5.59 inches (Width x Height x Depth) Power Requirements: 5VDC, Internal Power Consumption: 170 mA @ 5VDC I/O Slots: 5 slots for installing I/O modules Connector Type: 25-pin D-sub female I/O expansion connector on the rightmost edge Cable Distance: Maximum allowed cable length for interconnection is 50 feet (15 meters) Compatibility: Compatible with CPU 331, 340, 341, 350, or higher versions
Technical Specifications Manufacturer: GE (General Electric) Model: IC693CHS397 Type: 5-slot expansion baseplate for 90-30 series PLC platform I/O Slots: Supports multiple I/O modules and expansion ports Compatibility: Designed to work with CPU baseplates and connect via expansion ports Power Requirements: Depends on the connected CPU and modules
Technical Specifications Model: IC693CHS391 Manufacturer: GE Fanuc Series: Part of the 90-30 Series PLC (Programmable Logic Controller) Slots: Total Slots: 10 CPU Slot: 1 I/O Slots: 9 Power Slot (excluded from slot count): 1 (located on the leftmost side) Voltage and Current: Rated Voltage: 5 VDC Rated Current: 420 mA
