NI 9505
The NI 9505 is a motor drive module designed for the CompactRIO platform by National Instruments. It is primarily used to control brushed DC motors in various automation and robotics applications.
Shop
You are here:
NI SCXI-1160
The NI SCXI-1160 is a 16-channel, general-purpose relay switch module used within the SCXI (Signal Conditioning eXtensions for Instrumentation) system. This module is designed to switch up to 16 different signals, with each relay capable of handling 30 W power and 2 A current, making it ideal for applications requiring high-density signal routing.
NI SCXI-1104C
The NI SCXI-1104C is a high-performance voltage input module designed by National Instruments (NI) for use in data acquisition systems. It is part of the SCXI (Signal Conditioning eXtensions for Instrumentation) series and is typically employed in applications requiring precise analog signal acquisition and conditioning.
NI SCXI-1100
The NI SCXI-1100 is a 32-channel analog input module designed for signal conditioning in millivolt, volt, and current inputs. It features a programmable gain instrumentation amplifier (PGIA) and a jumper-selectable 4 Hz lowpass filter. The channels are multiplexed into a single channel for data acquisition, making it an economical solution for multi-channel data acquisition systems. It is commonly used in industrial and laboratory environments for tasks requiring accurate and low-noise signal processing.
NI SCXI-1000
The NI SCXI-1000 is a rugged, low-noise, 4-slot chassis designed for signal conditioning and data acquisition in industrial and laboratory settings. It supports various SCXI modules, providing power, timing, and signal routing between modules and connected DAQ devices.
NI SBRIO 9607
The NI sbRIO-9607 is a compact, single-board controller from National Instruments designed for high-performance embedded applications. It combines a 667 MHz dual-core ARM Cortex-A9 processor with a Xilinx Zynq-7020 FPGA, providing a robust platform for both real-time processing and custom I/O.
NI GPIB-140A 186135H-01L
The NI GPIB-140A 186135H-01L is a General-Purpose Interface Bus (GPIB) controller designed for high-performance applications in test and measurement environments. This module is a part of National Instruments' series of GPIB products, intended to facilitate reliable communication between computers and various GPIB-compliant instruments.
NI GPIB-140A 186135G-01
The NI GPIB-140A 186135G-01 is a General-Purpose Interface Bus (GPIB) controller card, primarily designed for efficient communication with instruments and devices that use the GPIB (IEEE 488) standard. This module facilitates reliable data transfer and instrument control in various test, measurement, and automation systems.
NI GPIB-140A 186135F-31
The NI GPIB-140A 186135F-31 is a General-Purpose Interface Bus (GPIB) controller card designed by National Instruments (NI) for use in test and measurement applications. This card is typically used to connect and control GPIB-compliant instruments like oscilloscopes, multimeters, and power supplies via a standard GPIB cable.
NI GPIB-140A
The NI GPIB-140A is a fiber optic extender designed by National Instruments to extend the distance capabilities of the GPIB (General Purpose Interface Bus) system. This device allows users to extend the GPIB bus by up to 1 kilometer, far beyond the 20-meter limit imposed by the IEEE 488 standard, without compromising the integrity of the data transmission or requiring any software modifications.
NI SCXI-1104C
The NI SCXI-1104C is a multifunctional signal conditioning module used with the National Instruments SCXI (Signal Conditioning eXtensions for Instrumentation) system. It is designed for accurate and flexible signal conditioning in a wide range of applications.
NI ARINC-429
The NI ARINC-429 module is designed for interfacing with ARINC 429 data buses, commonly used in aerospace and defense applications. This module provides an interface for communication with ARINC 429 systems, enabling data acquisition, analysis, and simulatio