Shop

You are here:
  1. Home
  2. Shop
  3. Page 2630

Prosoft RLX2-IFH24E

Prosoft RLX2-IFH24E 1、 Technical specifications Frequency: 2.400 to 2.4835 GHz Protocol: Supports all standard IEEE 802.3 protocols Security: Adopting 128 bit AES encryption Network topology: supports various network topology structures such as point-to-point, point-to-point, storage and forwarding relays, etc Intelligent packet switching: used for virtual point-to-point communication Error detection: Supports 32-bit CRC and ARQ (automatic resend query) Radio type: Frequency hopping spread spectrum Transmission power: FCC-A model programmable range from 100 mW to 1W, ETSI-E model programmable range from 10 mW to 100 mW Channel data transmission rate: programmable to 1.1 Mbps or 345 kbps Receiving sensitivity: -97 dBm @ 10-6 BER at 1.1 Mbps; At 345 kbps, -104 dBm @ 10-6 BER 2、 Functional characteristics Backward compatibility: Backward compatibility with ProSoft Technology's RLX-IFH24E. Intelligent switching technology: providing true point-to-point connection and achieving performance optimization. Serial device support: provided through serial to serial tunneling or serial TCP/UDP encapsulation. International unlicensed: Use the 2.4 GHz frequency that is internationally unlicensed. Industrial grade design: Metal shell, industrial grade working temperature, good vibration and impact resistance. Unique frequency hopping algorithm: Wi Fi scanner cannot detect, ensuring communication security. Graphical network representation: Use graphics to represent the network during configuration and diagnosis. Advanced diagnosis: including advanced diagnostic functions such as temperature and signal quality. Software support: HMI can diagnose RF wireless networks through ControlScape software and OPC server.

PEPPERL+FUCHS HiD2082

PEPPERL+FUCHS HiD2082 It is a temperature signal regulator module, and the following is detailed information about it: technical specifications Working environment temperature: can work in environments ranging from -4 to 140 degrees Fahrenheit (-20 to 60 degrees Celsius). Power requirement: 24V DC power supply (bus powered). Output signal: Linearized output, ranging from 4 mA to 20 mA, or 1 V to 5 V. Isolation function: Provides 2-channel isolation barriers to reduce signal interference. Functional characteristics Dual channel isolation: HiD2082 has two independent channels, each capable of processing temperature signals and supporting simultaneous monitoring or control of two different temperature points. Signal isolation and conversion: Provides electrical isolation of input signals to reduce interference. At the same time, thermal resistance (RTD) or thermocouple (TC) signals can be converted into standard current or voltage signals, such as 4-20mA or 0-10V, for subsequent signal processing and long-distance transmission. High precision measurement: Ensure the accuracy of temperature measurement, suitable for industrial applications that require high-precision temperature control. Flexible configuration: supports multiple types of temperature sensors, and users can choose the appropriate sensor type for configuration according to their actual needs. Diagnostic function: Integrated with diagnostic function, it can detect open circuits, short circuits, or line faults, which helps with preventive maintenance. Easy to install and maintain: Designed for quick installation and replacement, reducing system downtime. The optional fault monitoring terminal board simplifies the operation and maintenance process. Wide power supply voltage range: Suitable for different on-site power supply conditions. Application scenarios The PEPPERL+FUCHS HiD2082 temperature signal regulator module is widely used in industrial fields that require high-precision temperature monitoring and control, including but not limited to automation control systems, environmental monitoring systems, temperature testing and calibration equipment, etc.

Valmet D202593

Valmet D202593 1、 Technical specifications Model: D202593 Manufacturer: VALMET Bus type: PROFIBUS DP Transmission rate: up to 12 Mbaud Number of connected I/O modules: up to 24 Dimensions: 85 x 30 x 25 mm Weight: 150 grams Working temperature: -20 ° C to+60 ° C Protection level: IP67 2、 Functional characteristics High speed transmission rate: Supports a transmission rate of up to 12 Mbaud, ensuring efficient data transmission. Multiple I/O module support: Supports up to 24 I/O modules, suitable for industrial automation needs of different scales. Optimized industrial application design: optimized for the industrial environment, capable of withstanding harsh working conditions such as a wide temperature range, strong resistance to vibration and electromagnetic interference. Security features: may include multiple security functions, such as error detection and security chain mechanisms, to ensure the security of industrial automation applications.

Triconex PLM3900N

Triconex PLM3900N It is a safety redundant I/O module produced by Triconex company, which has a wide range of applications in the field of industrial control. The following is detailed information about Triconex PLM3900N: technical specifications Model: PLM3900N Manufacturer: Triconex Module type: Safety redundant I/O module Number of channels: up to 32 Security level: Complies with SIL 3 security level requirements Size: 150 x 75 x 50 mm Weight: 500 grams Functional characteristics High reliability: The PLM3900N adopts a Triple Modular Redundancy (TMR) design, with three independent circuits for each input and output channel, providing extremely high reliability and fault tolerance. Digital I/O function: This module provides digital input and output functions for receiving and sending binary signals, such as switch status or control commands. Safety: As part of the Triconex safety instrument system, the PLM3900N module is designed specifically for safety critical applications such as emergency stop systems (ESD) and combustion management systems (BMS). Communication capability: The module can communicate with the Triconex controller, report input status, and receive output commands. Easy to install and configure: The design of the PLM3900N module considers usability, making it easy to install and configure in the system. Strong scalability: The module supports up to 32 channels and can be expanded according to application requirements.

TeIKOOR CPCIAC-6U-500 900-7002-10

TeIKOOR CPCIAC-6U-500 900-7002-10 It is a high-performance industrial product, and the following is detailed information about its technical specifications, functional characteristics, and application scenarios: technical specifications Model: CPCIAC-6U-500 900-7002-10 Brand: TeIKOOR Input voltage: usually within a wide range, such as 90VAC to 264VAC (specific values may vary depending on model and configuration) Output voltage: including various DC voltages such as+3.3 V,+5 V,+12 V, -12 V,+48 V, etc Output power: Rated power is 350W (may be adjusted due to model and configuration) Efficiency: up to 90%, achieving efficient energy utilization Working temperature: -20 ° C to+60 ° C, suitable for various environmental application needs Protection level: IP67, dustproof and waterproof, suitable for harsh environments Functional characteristics High speed data acquisition: capable of capturing signals at high sampling rates, suitable for complex signal environments that require real-time analysis. Large storage depth: Provides a large capacity of memory that can store continuous data for long periods of time, suitable for long-term signal recording and analysis. Multifunctional signal processing: Equipped with built-in digital signal processing functions, it can perform real-time filtering, amplification, and data compression on the collected signals. Modular design: Adopting the CompactPCI standard, it is easy to integrate into existing systems and is easy to maintain and upgrade.

Bently 190065A-00-00-01-00-01

Bently 1900/65A-00-00-01-00-01 Universal Equipment Monitor 1、 Technical specifications Sensor Input: Provides 4 sensor inputs, and the software can configure each sensor input to support 2-wire and 3-wire accelerometers, speed sensors, or proximity sensors. Temperature input: Each temperature input supports E, J, K, and T type thermocouples, as well as 2-wire or 3-wire RTDs. Output: Provides 6 relay outputs, 4 4-20 mA recorder outputs, and a dedicated buffered output. Vibration variables: configurable 4-pole high pass and 4-pole low pass from 0.5 Hz to 25 kHz; Envelope Qualcomm: 25Hz to 5kHz, can be configured with 4 poles; Envelope low-pass: 125 Hz to 25 kHz, can be configured with 2 poles; Envelope variable high pass: minimum 0.1 Hz, but greater than 2 poles of envelope variable low pass; Envelope variable low-pass: greater than envelope variable high pass, less than envelope high pass quadrupole; Bias filter: 0.01 Hz 1-pole low-pass; OK filter: 2.4 kHz 1-pole low-pass.

ABB 500SCM01 1MRB200059C 1MRB15004R0001

ABB 500SCM01 1MRB200059C 1MRB15004R0001 technical specifications Power supply voltage: 220V Disconnect capacity: 22A Rated current: 22A Working temperature: 22 ℃ Material code: 54588863202 Functional characteristics Power and Control Capability: With high power and control capabilities, suitable for industrial automation scenarios that require precise control. Alarm function: supports emergency alarm function, providing guarantee for the safe operation of equipment. Configuration flexibility: As a PLC (Programmable Logic Controller) module, it provides a variety of CPU, I/O modules, communication modules, and communication interface modules to choose from, and can be flexibly configured according to specific application requirements.

ABB 500CPU05 1MRB150081R1E

ABB 500CPU05 1MRB150081R1E It is a high-performance and highly integrated PLC (Programmable Logic Controller) control processor module. The following is detailed information about it: technical specifications Model: 500CPU05 1MRB150081R1/E Manufacturer: ABB Product type: Processor module Voltage: 370 V AC Power: 5.0 kW Current: 9.2A Speed range: 0 to 1500 rpm Functional characteristics High performance and integration: As a high-performance PLC control processor, it integrates rich functions and options to meet the needs of different industrial automation scenarios. Programming and Configuration Options: Provides multiple programming and configuration options, allowing users to flexibly customize according to application requirements. User Program Execution: Used in industrial automation and control systems, capable of executing user written programs to achieve configuration and control of on-site equipment. Vector control technology: Supports vector control technology to achieve high-precision speed and torque control.

ABB 500BIO01 1MRB150005R1/J

ABB 500BIO01 1MRB15005R1/J frequency converter control unit technical specifications Model: 500BIO01 1MRB15005R1/J Manufacturer: ABB Product type: Frequency converter control unit Voltage: 380 V AC Power: 0.15 kW Current: 0.3 A Speed range: 0 to 1500 rpm Control method: vector control Functional characteristics High precision: Adopting vector control technology, providing high-precision speed and torque control. High reliability: Adopting a sturdy and durable design, it can withstand harsh environments. Easy to use: Provides clear menus and simple operation buttons, making it convenient for users to operate. Fully functional: Provides multiple functions, such as fault alarm and self diagnosis, to help users discover and solve problems in a timely manner. High cost-effectiveness: Affordable price, reliable performance, providing users with a high-quality cost-effective experience. Application scenarios ABB 500BIO01 1MRB15005R1/J frequency converter control unit is suitable for various industrial applications, including but not limited to:

GE VMVIVME-3125

1、 Technical specifications Processor: Assuming that the GE VMVIVME-3125 is equipped with a high-performance processor, it may be based on current popular architectures such as ARM or x86, and the main frequency may reach 2.0 GHz or above. Memory: Assuming the device supports DDR4 memory, the capacity may start at 4GB and can support up to 16GB or more. Storage: It may be equipped with eMMC or SSD solid-state drives, providing high-speed data read and write capabilities. Interface: including common interfaces such as HDMI, USB 3.0, Ethernet, etc., to meet different connection requirements. Other: It may also include wireless communication functions such as Bluetooth and Wi Fi, as well as necessary input/output device interfaces. 2、 Functional characteristics High performance: Based on powerful processors and high-speed memory/storage, it provides excellent computing power and data processing speed. Scalability: Supports multiple extension interfaces and modules, and can be flexibly configured according to actual needs. Stability: Using high-quality hardware components and strict production processes to ensure the stability and reliability of the equipment. Usability: Friendly user interface and operating experience, reducing the threshold for use.

VMIVME-7807

1、 Technical specifications Processor: GE VMIVME-7807 is equipped with Intel ® The Pentium ® M processor has a main frequency of up to 1.8 GHz, ensuring excellent computing power and processing speed. Memory: This single board computer supports DDR SDRAM memory, with a maximum capacity of 1.5 GB, allowing it to handle large amounts of data and complex applications. Storage: GE VMIVME-7807 offers a bootable CompactFlash storage option with a maximum capacity of 2 GB, providing a flexible and reliable storage solution for the system. Network: This device has dual Gigabit Ethernet interfaces, providing high-speed and stable network connectivity, suitable for application scenarios that require high-speed data transmission and network communication. Scalability: Supports multiple expansion options, including a 200 pin DDR SDRAM SODIMM slot and optional soldered onboard memory, making it convenient for users to flexibly configure and expand according to specific needs. Other: Having 2 MB of L2 cache to improve system performance and response speed. In addition, it is equipped with a 1101.10 front panel interface and an optional G1 Gigabit front panel Ethernet port, providing a variety of interface and connection options. Size and weight: The size is 233 mm x 160 mm x 23 mm, with a weight of approximately 500 grams, making it easy to install and carry. Power consumption and operating temperature: Typical power consumption is 25 watts, operating temperature range is 0 ° C to 55 ° C, storage temperature range is -40 ° C to 85 ° C, humidity range is 5% to 95% (non condensing), vibration and impact performance also meet industrial standards. 2、 Functional characteristics High performance: based on Intel ® The design of the Pentium ® M processor ensures powerful computing power and efficient data processing capabilities. High reliability: The use of high-quality hardware components and strict production processes ensures the stability and reliability of the equipment. Scalability: Supports multiple expansion options, making it convenient for users to flexibly configure and expand according to their actual needs. Rich interfaces: Provides multiple interface and connection options, making it convenient for users to transfer data and connect devices.

GE VMIVME-7698-345 350-017698-345B

GE VMIVME-7698-345 350-017698-345B It is a high-performance VME bus module with multiple advanced technical specifications and functional features. technical specifications Processor: Equipped with Saiyang socket 370 processor, it has 32-bit addressing and 64 bit data bus. Memory: The onboard DRAM is a dual port VMEbus, which may contain high-speed RAM to meet the needs of high-performance computing or real-time processing. Network interface: Supports fast Ethernet controllers and provides 10BaseT and 100BaseTX interfaces. Storage controller: onboard Ultra DMA/33 hard drive and Foppy drive controller with VMEbus P2 I/O. Serial ports: Two high-performance 16550 compatible serial ports. Keyboard and mouse ports: PS/2 style keyboard and mouse ports on the front panel. Functional characteristics High performance: Equipped with high-performance processors and high-speed RAM, it can handle complex computing and control tasks. VME bus compatibility: With a standard VME bus interface, it can be easily integrated into existing VME systems, achieving seamless connection with other VME devices. High reliability: Advanced cooling design, redundant power supply and other reliability measures may be adopted to ensure stable operation in harsh environments. Wide temperature working range: usually with a wide temperature working range, it can meet the needs of military and aerospace fields. Anti vibration and shock: Special designs and materials are used to resist vibration and shock, ensuring the stability and reliability of the system in dynamic or harsh environments.