Shop

You are here:
  1. Home
  2. Shop
  3. Page 23

GE SR745-W2-P5-G5-HI-A Transformer Protection Relay Module

Technical Specifications

  • Power Supply:
    • Control voltage range: 90–300 V DC or 70–265 V AC (48–62 Hz).
  • Environmental Conditions:
    • Operating temperature: -40°C to +60°C (-40°F to +140°F).
    • Storage temperature: -40°C to +80°C (-40°F to +176°F).
    • Humidity tolerance: Up to 90% relative humidity (non-condensing).
  • Protection Functions:
    • Differential protection, overcurrent protection, ground fault protection, thermal overload protection, frequency protection, and voltage protection.

GE IC086SLN042-A Industrial Ethernet Communication Module

Technical Specifications

  • Interface Configuration:
    • 4 × 10/100Base-T(X) RJ45 electrical ports (MDI/MDI-X adaptive).
    • 2 × 100Base-FX optical ports (available in single-mode or multi-mode variants).
  • Optical Parameters:
    • Single-mode: 9/125μm fiber, SC connector, 30km transmission distance.
    • Multi-mode: 62.5/125μm or 50/125μm fiber, SC connector, 2km transmission distance.
  • Power Supply:
    • Redundant DC input (12-48V) via 7-pin terminal block or 12-45V DC via jack connector.
    • Power consumption: 7W typical.

GE IC754V06MTD-MHES0601 Communication Module

Technical Specifications

  • Communication Protocols: Supports Ethernet/IP, Modbus TCP/IP, and other industrial Ethernet protocols.
  • Interface Type: RJ45 Ethernet port for network connectivity.
  • Data Transfer Rate: Up to 100 Mbps (dependent on network conditions).
  • Power Supply: 24V DC nominal (18-30V DC range).
  • Power Consumption: Typically 5W under normal operating conditions.
  • Operating Temperature: 0°C to 60°C (32°F to 140°F).
  • Storage Temperature: -40°C to 85°C (-40°F to 185°F).
  • Humidity Range: 5% to 95% non-condensing.

GE IC693UDR005EP1 Communication Module

Technical Specifications

  • Communication Protocols: Supports Ethernet/IP, Modbus TCP/IP, and other industrial Ethernet protocols.
  • Interface Type: RJ45 Ethernet port for network connectivity.
  • Data Transfer Rate: Up to 100 Mbps (dependent on network conditions).
  • Power Supply: 24V DC nominal (18-32V DC range).
  • Power Consumption: Typically 5W under normal operating conditions.
  • Operating Temperature: 0°C to 60°C (32°F to 140°F).
  • Storage Temperature: -40°C to 85°C (-40°F to 185°F).
  • Humidity Range: 5% to 95% non-condensing.

GE IC200UDR005-BG Communication Module

Technical Specifications

  • Communication Protocols: Supports Ethernet/IP, Modbus TCP/IP, and other industrial Ethernet protocols.
  • Interface Type: RJ45 Ethernet port for network connectivity.
  • Data Transfer Rate: Up to 100 Mbps (dependent on network conditions).
  • Power Supply: 24V DC nominal (18-32V DC range).
  • Power Consumption: Typically 5W under normal operating conditions.
  • Operating Temperature: 0°C to 60°C (32°F to 140°F).
  • Storage Temperature: -40°C to 85°C (-40°F to 185°F).

GE IC693MDL742 Digital Output Module

Technical Specifications

  • Output Points: 16 digital outputs (grouped in two sets of 8 points each).
  • Output Type: Sourcing (positive logic), providing current from the module’s positive power bus to connected loads.
  • Voltage Range: 12–30V DC (compatible with both 12V and 24V DC systems).
  • Current per Point: 0.5A maximum per output point; 2A maximum per common (group).
  • Response Time:
    • On-time: ≤2ms
    • Off-time: ≤2ms
  • Surge Current: 4.78A for 10ms (during initial energization).

GE IC693MDL645 Digital Input Module

Technical Specifications

  • Input Points: 32 digital inputs (configurable in groups).
  • Input Type: Supports 24V DC positive/negative logic.
  • Voltage Range: 10–30V DC (nominal 24V DC).
  • Current Consumption: 15mA from backplane at 5V DC.
  • Response Time:
    • On: ≤0.2ms
    • Off: ≤1.0ms
  • Thermal Derating: Operates at 24/30V DC with reduced current capacity.
  • Mounting: DIN rail or panel mounting.
  • Compliance: UL, CUL, CE, Class I Division 2, ATEX Zone 2.
  • LED Indicators: Per-point status visualization for real-time monitoring.

GE IC200MDL740 Discrete Output Module

Technical Specifications

  • Output Points: 16 discrete points (1 group of 16).
  • Output Type: Positive logic (sourcing type).
  • Voltage Range: 10.2–30V DC (nominal 12/24V DC).
  • Current per Point: 0.5A (maximum).
  • Response Times:
    • On: 0.2ms (maximum).
    • Off: 1.0ms (maximum).
  • Power Consumption: 45mA from backplane.
  • LED Indicators: Per-point status visualization.
  • Thermal Derating: Supported at 24/30V DC.

GE IC693CBL305A Communication Cable

Technical Specifications

  • Brand: GE (General Electric)
  • Model: IC693CBL305A
  • Cable Type: Communication cable for PLC systems
  • Length: Varies based on configuration (common lengths include 1m, 2m, 5m, etc.)
  • Connector Type: D-subminiature (D-sub) or other industrial-grade connectors (specific type depends on configuration)
  • Voltage Rating: Typically supports low-voltage communication signals (e.g., 5V, 12V, 24V)
  • Current Rating: Designed for low-current signal transmission
  • Shielding: Features shielding to minimize electromagnetic interference (EMI) and ensure signal integrity

GE IC693PBS201 Power Module

Technical Specifications

  • Brand: GE (General Electric)
  • Model: IC693PBS201
  • Type: Power module for PLC systems
  • Output Type: Transistor-based output
  • Output Points: 16 points
  • Output Voltage: DC 5-24V
  • Output Current: Maximum 0.5A per point
  • Isolation Method: Optical isolation
  • Operating Temperature Range: -20°C to 60°C

GE IC200MDL742D Analog Output Module

Technical Specifications

  • Brand: GE (General Electric)
  • Model: IC200MDL742D
  • Type: Analog output module for PLC systems
  • Output Channels: Supports multiple analog output channels (specific channel count depends on configuration, typically ranging from 2 to 8 channels).
  • Output Signal Type: Voltage or current output (configurable based on application requirements).
  • Voltage Output Range: 0-5V, 0-10V, ±5V, ±10V (configurable).
  • Current Output Range: 0-20mA, 4-20mA (configurable).

GE IC200ALG325H Logic Module

Technical Specifications

  • Brand: GE (General Electric)
  • Model: IC200ALG325H
  • Type: Logic module for PLC systems
  • Input/Output Channels:
    • Supports up to 8 analog input channels (configurable for voltage or current signals).
    • Voltage input range: 0-5V, 0-10V, ±5V, ±10V.
    • Current input range: 0-20mA, 4-20mA.
    • Resolution: 16-bit for high-precision data acquisition.