Bently 330130-045-01-CN
Product Introduction:
Armored 4.5 m cable with NEPSI Ex certification for Chinese hazardous areas.
Technical Specifications:
-
Length: 4.5 m
-
Armor: Stainless-steel interlocked
-
Approvals: NEPSI Ex
Shop
You are here:
Bently 330130-045-00-05
Product Introduction:
Agency-approved 4.5 m cable for worldwide hazardous areas.
Technical Specifications:
-
Length: 4.5 m
-
Approvals: CSA, ATEX, IECEx
Bently 330130-045-00-00
Product Introduction:
Standard 4.5 m extension for installations where the driver must be mounted farther from the machine.
Technical Specifications:
-
Length: 4.5 m
-
Certifications: None
Bently 330130-040-02-00
Product Introduction:
4 m cable with FluidLoc internal seal that prevents oil migration along the cable core even under continuous oil splash.
Technical Specifications:
-
Length: 4.0 m
-
Seal: FluidLoc barrier
-
Certifications: None
Bently 330130-040-01-CN
Product Introduction:
Armored 4 m cable with NEPSI Ex certification for Chinese hazardous areas.
Technical Specifications:
-
Length: 4.0 m
-
Armor: Stainless-steel interlocked
-
Approvals: NEPSI Ex
Bently 330130-040-01-00
Product Introduction:
Same electrical specs as above but factory-fitted with stainless-steel interlocked armor for mechanical protection.
Technical Specifications:
-
Length: 4.0 m
-
Armor: Stainless-steel interlocked, 6 mm OD
-
Pull Strength: 1,000 N
-
Bend Radius: 75 mm static
-
Certifications: None
Bently 330130-040-00-CN
Product Introduction:
A 75 Ω triaxial extension cable that joins probe and Proximitor while preserving signal fidelity. Certified to NEPSI Ex for immediate acceptance in Chinese hazardous areas.
Technical Specifications:
-
Length: 4.0 m
-
Impedance: 75 Ω ±2 %
-
Capacitance: 69.9 pF/m
-
Connector: Male probe side, female driver side, miniature coax
Bently 330106-05-30-90-02-05-CN
Product Introduction:
A high-precision, non-contact sensor engineered for Chinese installations. Measures shaft displacement, vibration and axial position on rotating machinery with <1 % linearity error. The 90° miniature ClickLoc connector and 3 m cable fit space-constrained layouts typical of Chinese pumps, turbines and compressors.
Technical Specifications:
-
Probe Diameter: 8 mm
-
Thread: M10 × 1 (reverse-mount)
-
Case Length: 30 mm
-
Total Length: 0.5 m probe + 3 m integral cable
-
Connector: 90° miniature coax ClickLoc
-
Linear Range: 0.25 – 2.3 mm (10 – 90 mils)
-
Sensitivity: 7.87 V/mm (200 mV/mil)
-
Frequency Response: 0 – 10 kHz
Bently 330106-05-30-10-02-CN
Product Introduction:
One-meter 11 mm probe certified to NEPSI Ex for Chinese market.
Technical Specifications:
-
Total Length: 1.0 m
-
Certifications: NEPSI Ex
Bently 330106-05-30-10-02-05
Product Introduction:
One-meter 11 mm probe with worldwide Ex certification for longer reach applications.
Technical Specifications:
-
Total Length: 1.0 m
-
Approvals: CSA, ATEX, IECEx
Bently 330106-05-30-05-02-05
Product Introduction:
Agency-approved 11 mm probe for worldwide hazardous areas.
Technical Specifications:
-
Total Length: 0.5 m
-
Approvals: CSA, ATEX, IECEx
Bently 330106-05-30-05-02-00
Product Introduction:
An 11 mm diameter probe that provides the same 2 mm linear range as the 8 mm version but with a stiffer case for high-vibration or side-loading environments.
Technical Specifications:
-
Probe Diameter: 11 mm
-
Thread: M14 × 1.5
-
Total Length: 0.5 m
-
Linear Range: 2 mm
-
Sensitivity: 7.87 V/mm
-
Certifications: None