Shop

You are here:

Home
Shop
Page 13

ABB (7491)
Others (6843)
GE (3609)
Siemens (3351)
Bently (2259)
PLC (2050)
Honeywell (1902)
Emerson (1094)
Schneider (645)
Foxboro (533)
Yokogawa (529)
A-B (372)
Moog (354)
Triconex (351)
Hima (319)
Ics Triplex (195)
Allen-Bradley (185)
Extreme Networks (170)

Bently 330171-00-12-10-01-05

Product Introduction: Long-case 11 mm probe with factory-armored integral cable for maximum mechanical protection in high-stress areas.

Technical Specifications:

Case Length: 120 mm
Total Length: 1.0 m
Armor: Stainless-steel interlocked
Approvals: ATEX, IECEx, CSA

Bently 330171-00-08-20-02-00

Product Introduction: 2 m system version of the 11 mm probe for installations where the driver must be mounted farther from the machine.

Technical Specifications:

Total Length: 2.0 m
Case Length: 80 mm
Certifications: None

Bently 330171-00-08-10-02-00

Product Introduction: 11 mm diameter probe for high-stiffness applications where increased resistance to side loading or vibration is required. Offers the same 2 mm linear range as 8 mm probes.

Technical Specifications:

Probe Diameter: 11 mm
Thread: M14 × 1.5
Case Length: 80 mm
Total Length: 1.0 m
Certifications: None

Bently 330161-02-85-05-94-01-02

Product Introduction: Ultra-slim 5 mm probe for tight radial clearances. Reverse-mount version with 90° connector fits inside small turbine wheels or compressor impellers where axial space is minimal.

Technical Specifications:

Probe Diameter: 5 mm
Thread: M8 × 1 reverse
Case Length: 85 mm
Total Length: 1.0 m
Connector: 90° miniature coax

Bently 330130-085-02-05

Product Introduction: 8.5 m standard extension for installations where an extra 0.5 m reach is required without stepping up to the next standard length. Fully agency-approved for worldwide use.

Technical Specifications:

Length: 8.5 m
Impedance: 75 Ω
Temperature: –55 °C to +200 °C
Approvals: ATEX, IECEx, CSA

Bently 330130-080-12-05

Product Introduction: Combines armor and FluidLoc technologies in one 8 m cable for maximum mechanical and chemical protection. Certified for worldwide hazardous areas.

Technical Specifications:

Length: 8.0 m
Armor: Stainless-steel interlocked
Seal: FluidLoc barrier
Approvals: ATEX, IECEx, CSA

Bently 330130-080-10-00

Product Introduction: 8 m cable insulated with perfluoroalkoxy (PFA) for extended temperature exposure up to 260 °C. Ideal for exhaust-gas or steam environments where standard FEP would soften.

Technical Specifications:

Length: 8.0 m
Insulation: PFA
Temperature: –55 °C to +260 °C
Impedance: 75 Ω
Approvals: None

Bently 330130-080-03-00

Product Introduction: 8 m extension cable with factory-integrated FluidLoc barrier that prevents oil migration along the cable core, safeguarding signal integrity in continuously oil-splashed environments.

Technical Specifications:

Length: 8.0 m
Seal: FluidLoc internal barrier
Impedance: 75 Ω
Temperature: –55 °C to +200 °C
Approvals: None

Bently 330130-080-00-CN

Product Introduction: 8 m standard extension cable certified to NEPSI Ex ia IIC T4 Ga for immediate acceptance in Chinese hazardous-area plants. Maintains 75 Ω impedance and high-temperature FEP insulation for long-distance signal integrity.

Technical Specifications:

Length: 8.0 m
Impedance: 75 Ω
Capacitance: 69.9 pF/m
Temperature: –55 °C to +200 °C
Approvals: NEPSI Ex ia IIC T4 Ga, Ex ia IIIC T135 °C Da

Bently 330130-080-01-00

Product Introduction: Heavy-duty 75 Ω triaxial extension cable that connects 3300 XL probes to Proximitor drivers. Factory-fitted with stainless-steel interlocked armor for crush and abrasion resistance in congested cable trays and pipe racks.

Technical Specifications: