Kollmorgen

You are here:
  1. Home
  2. Kollmorgen
  3. Page 31

Kollmorgen B-404-B-21

  • Product Name:​ B-Series Brushless Servo Motor (legacy Inland/Danaher Motion line)
  • Product Introduction:​ Permanent-magnet brushless DC/AC servo motor from the discontinued B/M-series, designed for general industrial motion control with SERVOSTAR drives.

Kollmorgen SR10200-000000

Product Name:​ SR10200 Single-Axis Resolver-Based Brushless Servo Drive (ServoStar S-class)
Product Introduction:​ Microprocessor-controlled PWM servo amplifier with IGBT output stage, resolver feedback and indexing capability, legacy replacement for 1990s–2000s single-axis systems.

Kollmorgen 6SM37M-6.000-G

Product Name:​ 6SM Series Brushless Synchronous Servo Motor (Seidel heritage)
Product Introduction:​ Compact high-dynamic 3-phase servo motor with neodymium rotor, designed for 6000 rpm duty and resolver commutation, pairs with ServoStar CD/S300/S600.

Kollmorgen AKM33H-ACC2C-00

Product Name:​ AKM3 Frame High-Torque AC Synchronous Servo Motor
Product Introduction:​ AKM3-size H-stack permanent-magnet motor with optimized winding for elevated continuous torque and smooth mid-speed operation, mated to AKD/AKD2G drives.

Kollmorgen CR03200-2G102A

Product Name:​ CR Series Economy Single/Dual-Axis Servo Controller Module
Product Introduction:​ Cost-optimized motion controller from CR03200 family with integrated soft-PLC and drive interface, targeted at small machines with limited axis count.

Kollmorgen CR06703-R

Product Name:​ CR Series Motion Controller Module (RAM/CPU extension board or controller card)
Product Introduction:​ Embedded control module for Kollmorgen Automation Suite, used as PLC/motion engine or memory/processing expansion in CR-class rack systems.

Kollmorgen DBL4N00530-03M-000-S40

Product Name:​ DBL4 Series Permanent-Magnet Synchronous Servo Motor
Product Introduction:​ Mid-power 3-phase brushless servomotor from the legacy Seidel DBL line, built for continuous-duty industrial motion with resolver or encoder feedback. Discontinued for new designs, still supported as service/replacement unit.

Kollmorgen AKM31E-ANCNR-00

Product Name:​ AKM Series AC Synchronous Brushless Servo Motor
Product Introduction:​ Permanent-magnet synchronous servo motor from the AKM3 frame family, optimized for high torque density, low cogging and flexible integration with Kollmorgen AKD-class drives.

Kollmorgen AKM42E-ANC2AAOO

Product Introduction
Mid-stack AKM series brushless servo motor with 84 × 84 mm square flange (NEMA 34 class). High torque density, low cogging, potted stator, neodymium-iron-boron rotor magnets. The “ANC2” segment decodes to AKM size 42, N tolerance flange, smooth shaft, resolver feedback with M23 connector; “AA00” denotes no brake, standard paint, no special shaft seal. Direct mechanical and electrical mate to AKD and S700 drives.

Kollmorgen AKD-P1207-NBPN-0000R

Product Introduction
AKD-family digital servo drive with onboard position indexer (motion tasking), PROFINET RT fieldbus, internal regenerative resistor, and basic I/O set. “P” in the code = position indexer firmware, “N” after P = PROFINET RT interface, “B” = internal brake resistor, “PN” = PROFINET + no additional option card. The unit is tuned through Kollmorgen WorkBench and pairs natively with AKM motors via automatic motor recognition.

Kollmorgen S70601-NA

Product Introduction
Smallest continuous-current member of the S700 line. Same architecture as S70602 but rated 1.5 A RMS at 400–480 VAC (2.5 A at 208 V). The “-NA” suffix denotes no expansion card and standard single-channel STO (SIL CL2 / PLd). Used for small AKM2x/AKM3x motors, micro-actuators, valve simulators, and medical automation axes.

Kollmorgen S70602-NANANA-NA

Product Introduction
Digital single-axis servo amplifier belonging to the Kollmorgen S700 family. The unit is a base configuration with no expansion cards in any of the three front slots; onboard EtherCAT and CANopen are active. The trailing “AKD” tag in the printed string is a distributor cross-reference note, not part of the native S700 order code. It is used as a follower drive in EtherCAT/CANopen machine networks or as a standalone torque/speed controller via analog I/O and pulse-direction.